diff --git a/minitests/roi_harness/.gitignore b/minitests/roi_harness/.gitignore
index 82a01aa0..dd262534 100644
--- a/minitests/roi_harness/.gitignore
+++ b/minitests/roi_harness/.gitignore
@@ -6,3 +6,4 @@
 /usage_statistics_webtalk.*
 /vivado*
 /design.txt
+/out_*
diff --git a/minitests/roi_harness/README.txt b/minitests/roi_harness/README.txt
index c8fe8978..e2f90c13 100644
--- a/minitests/roi_harness/README.txt
+++ b/minitests/roi_harness/README.txt
@@ -10,3 +10,10 @@ There is no logic outside of the ROI in order to keep IOB to ROI delays short
 Its expected the end user will rip out everything inside the ROI
 
 To target Arty A7 you should source the artix DB environment script then source arty.sh
+
+To build the baseline harness:
+make
+
+To build a sample design using the harness:
+XRAY_ROIV=roi_inv.v make
+
diff --git a/minitests/roi_harness/roi_inv.v b/minitests/roi_harness/roi_inv.v
new file mode 100644
index 00000000..7e575cb5
--- /dev/null
+++ b/minitests/roi_harness/roi_inv.v
@@ -0,0 +1,53 @@
+//Connect the switches to the LEDs, inverting the signal in the ROI
+//Assumes # inputs = # outputs
+
+`include "defines.v"
+
+module roi(input clk,
+        input [DIN_N-1:0] din, output [DOUT_N-1:0] dout);
+    parameter DIN_N = `DIN_N;
+    parameter DOUT_N = `DOUT_N;
+    wire [DIN_N-1:0] internal;
+
+    genvar i;
+    generate
+        //CLK
+        (* KEEP, DONT_TOUCH *)
+        reg clk_reg;
+        always @(posedge clk) begin
+            clk_reg <= clk_reg;
+        end
+
+        //DIN
+        for (i = 0; i < DIN_N; i = i+1) begin:ins
+            //Very expensive inverter
+            (* KEEP, DONT_TOUCH *)
+            LUT6 #(
+                .INIT(64'b01)
+            ) lut (
+                .I0(din[i]),
+                .I1(1'b0),
+                .I2(1'b0),
+                .I3(1'b0),
+                .I4(1'b0),
+                .I5(1'b0),
+                .O(internal[i]));
+        end
+
+        //DOUT
+        for (i = 0; i < DOUT_N; i = i+1) begin:outs
+            //Very expensive buffer
+            (* KEEP, DONT_TOUCH *)
+            LUT6 #(
+                .INIT(64'b010)
+            ) lut (
+                .I0(internal[i]),
+                .I1(1'b0),
+                .I2(1'b0),
+                .I3(1'b0),
+                .I4(1'b0),
+                .I5(1'b0),
+                .O(dout[i]));
+        end
+    endgenerate
+endmodule