a926ab9b88
Add (Cern) VMM3 board
2024-02-28 11:50:10 +01:00
0e99360d1c
Add (Cern) VEC_V6 Board
2024-02-28 11:50:10 +01:00
85d9ca5d20
board: added digilent cmoda7_15t
2024-02-26 21:18:33 +01:00
e923ef4059
lattice nexus boards: change from CABLE_DEFAULT (i.e. 6MHz) to CABLE_MHZ(1) (i.e. 1MHz)
...
as at 6MHz the download of bitstreams is not stable.
With "not stable" we mean that:
- when dealing with Certus/Crosslink, most of the times it works
- when dealing with CertusPro devices, most of the times it doesn't work
We think this is due to the size of the bitstream and the way that the
transmission/storing is handled on the receiving side (i.e. the FPGA).
2024-02-13 09:24:47 +01:00
1aaa1b37ac
board: add Antmicro LPDDR4 Tester board
...
Signed-off-by: Michal Sieron <msieron@antmicro.com>
2024-01-25 12:29:12 +01:00
59f5759888
board: add Antmicro DDR5 Tester board
...
Signed-off-by: Michal Sieron <msieron@antmicro.com>
2024-01-25 12:25:07 +01:00
17939d587e
board: add Antmicro DDR4 Tester board
...
Signed-off-by: Michal Sieron <msieron@antmicro.com>
2024-01-25 12:23:27 +01:00
ed547ed893
boards: adding AMD Virtex UltraScale+ FPGA VCU1525 Acceleration Development Kit
2023-12-11 12:23:37 +01:00
b70a3991cc
Add pynq-z1 board
2023-12-08 14:51:38 -05:00
2a2435ecbe
board: Xilinx KCU105 (Kintex Ultrascale xcku040)
2023-12-08 16:00:59 +01:00
46ce2e61a7
ALINX AX7101 board.
2023-10-28 17:22:42 +02:00
a87d689d83
ALINX AX7102 board.
2023-10-24 14:03:18 +02:00
b76a67963e
board: SiPEED tang Mega 138K
2023-10-24 06:11:53 +02:00
9a2fe6e157
board: SiPEED tang Primer 25K
2023-10-24 06:07:42 +02:00
dce0c050a7
board: add gr740-mini
2023-10-20 07:55:53 +02:00
5733ca29c3
fix lattice programming and add nexus boards
...
Fix to lattice programming:
we considered a svf file generated by Lattice Radiant-Programmer
and compared it with the current way lattice devices were programmed.
There were few differences dealing with configuration reset and REFRESH.
These fixes allow us to program an fpga when it is in a state
of error (e.g. there's no bitstream in the SPI Flash).
Lattice parts added:
- CertusPro FPGA
Nexus boards added:
- Certus Versa Evaluation board
- CertusPro Evaluation board
- CertusPro Versa Evaluation board
2023-10-11 09:52:45 +02:00
ad5ada90db
board: trion_t20_bga256_jtag support
2023-10-03 06:51:38 +02:00
afbf0c4ff8
board: adding @lambdaconcept ecpix5_r03 (ft4232)
2023-09-21 06:24:30 +02:00
9e91c31e31
Fixes for PVS errors
2023-09-01 22:30:24 +03:00
9d22d62a54
part/board: adding Avnet Mini-ITX
...
Adding the Avnet Mini-ITX dev board that uses the XC7Z100 Zynq-7000
device.
2023-08-07 17:06:02 +01:00
e3c8d6be1d
board: added QMTECH cyclone10 LP starter kit (10CL016YU484C8G)
2023-08-05 11:49:53 +02:00
91f2900f0c
add support for colorlight-i9+ board + spiOverJtag/spiOverJtag_xc7a50tfgg484.bit.gz
2023-06-30 11:36:32 +02:00
3e25a33346
boards: added support for 14bits 125MHz redpitaya board (7010)
2023-06-29 16:59:42 +02:00
9331bf7a6b
add sipeed tang nano 20k
2023-05-25 19:24:48 +08:00
873de96a3b
spiOverJtag: added efinix Titanium Ti60 support
2023-04-27 16:41:58 +02:00
07a0708eb8
efinix:
...
- jtag mode: added spiOverJtag support;
- spiOverJtag: added efinix support: verilog file and t8f81 bitstream
- xyloni: part code for spiOverJtag flash access/load bridge
2023-04-27 16:41:17 +02:00
4161c79920
Add Support for Xilinx KCU116 ( #322 )
...
* initial kcu116 support
* add kintex ultrascale plus family to xilinx.cpp
* add docs
* combine xcku and xcvu check
* rebuild bitstream for -1 speedgrade
2023-03-09 20:48:19 +01:00
cda14f24e3
board: hseda-xc6slx16
2023-03-04 17:55:02 +01:00
7de494f666
adding Opal Kelly XEM8320 board
2023-02-28 22:40:41 +01:00
f54781471b
Add initial support for VCU128
2023-02-19 18:39:14 +08:00
9a09e427e3
Added Lone Dynamics Schoko and Konfekt SBCs
2023-02-11 17:15:45 +01:00
5a00f0d184
part: Add all cyclone V variant
...
board: Add the Terasic C5G
2023-01-29 15:35:47 +01:00
e5481787d8
Fix VCU118 board part name and IR length
2023-01-21 14:45:50 +01:00
67563983f9
feat(board): add support for Terasic DE10-Lite
2023-01-09 15:52:54 -06:00
fdf4c94d83
boards: add Sitlinv STLV7325
...
Sitlinv STLV7325 is a board with XC7K325T-FFG676.
Add support for it.
The board does not have JTAG cables on board, however its vendor
provides an option to buy a FT4232-based JTAG cable with the board, so
the default cable is set to ft4232.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2023-01-06 15:22:43 +08:00
14fce33109
feat(board): add support for Arrow/Terasic DECA
2023-01-04 13:11:21 -06:00
cc1bc89f29
boards: Trenz TEI0010 - AnalogMax
2023-01-04 19:00:08 +01:00
0591af56b7
feat(board): add support for Trenz C10LP-RefKit
2022-12-25 15:53:45 -06:00
0bdef7bab1
typo's, added git as dependency
2022-12-18 13:56:54 +01:00
0855efb29f
Add initial support for the VCU118 board
2022-12-11 22:11:50 +01:00
e536634ada
adding LiteX-Acorn-Baseboards support
2022-12-11 20:39:32 +01:00
0048431fb2
ALINX AX516 board.
2022-11-26 23:05:30 +01:00
b078aa393a
adding nexys A7 (50/100) aka nexys 4 DDR
2022-11-23 13:47:07 +01:00
42193f1db8
boards: Add USRP X300 and X310
...
Signed-off-by: Martin Braun <martin.braun@ettus.com>
2022-11-22 20:15:16 +01:00
2da7696f19
Update board.hpp
2022-10-30 15:05:22 +02:00
b3e25bc650
Add support for xc7s_csga225 and the Digilent CMOD S7 board.
2022-09-30 22:27:20 +02:00
3c9792645e
add support for CmodA7-35T digilent fpga board
2022-09-30 21:17:45 +02:00
61e959f93d
main,board,ftdiJtagBitbang: use pin ID instead of shift
2022-08-23 18:37:43 +02:00
b4d343ce05
board: adding sipeed Tang Primer 20k
2022-07-26 20:25:43 +02:00
2f30668dbc
ORBTrace Mini support (DFU mode)
2022-06-18 22:55:58 +02:00
Uwe Bonnes
Gwenhael Goavec-Merou
Giovanni Bruni
Michal Sieron
Gwenhael Goavec-Merou
Tim Paine
Haakan T Johansson
Alexey Starikovskiy
Shareef Jalloq
Stéphane Chevigny
wonderfullook
Maik Ender
Jiajie Chen
wdevore
Olivier Galibert
Ricardo Barbedo
Marcus Andrade
Icenowy Zheng
Cedric de Wijs
Martin Braun
Dvir Cohen
Bastian Löher
Hirosh Dabui