From 77cfece64869e9e6c3ae1c8e8bc374f9bbfa61cc Mon Sep 17 00:00:00 2001 From: Gwenhael Goavec-Merou Date: Sat, 2 May 2020 09:58:32 +0200 Subject: [PATCH] update README with machXO2 --- README.md | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/README.md b/README.md index 3cbd6ca..c5dc9c0 100644 --- a/README.md +++ b/README.md @@ -6,6 +6,7 @@ __Current support kits:__ * Trenz cyc1000 Cyclone 10 LP 10CL025 (memory and spi flash) * [Colorlight 5A-75B (version 7)](https://fr.aliexpress.com/item/32281130824.html) (memory and spi flash) * Digilent arty Artix xc7a35ti (memory and spi flash) +* [Lattice MachXO2 Breakout Board Evaluation Kit (LCMXO2-7000HE)](https://www.latticesemi.com/products/developmentboardsandkits/machxo2breakoutboard) (memory and flash) * Lattice MachXO3LF Starter Kit LCMX03LF-6900C (memory and flash) * [Lattice ECP5 5G Evaluation Board (LFE5UM5G-85F-EVN)](https://www.latticesemi.com/en/Products/DevelopmentBoardsAndKits/ECP5EvaluationBoard) (memory and spi flash) * [Trenz Gowin LittleBee (TEC0117)](https://shop.trenz-electronic.de/en/TEC0117-01-FPGA-Module-with-GOWIN-LittleBee-and-8-MByte-internal-SDRAM) @@ -16,6 +17,7 @@ __Current support kits:__ __Supported (tested) FPGA:__ * Gowin [GW1N (GW1N-1, GW1N-4, GW1NR-9)](https://www.gowinsemi.com/en/product/detail/2/) (SRAM and Flash (flash mode only tested with GW1NR-9)) +* Lattice [MachXO2](https://www.latticesemi.com/en/Products/FPGAandCPLD/MachXO2) (SRAM and Flash) * Lattice [MachXO3LF](http://www.latticesemi.com/en/Products/FPGAandCPLD/MachXO3.aspx) (SRAM and Flash) * Lattice [ECP5 (25F, 5G 85F](http://www.latticesemi.com/Products/FPGAandCPLD/ECP5) (SRAM and Flash) * Xilinx Artix 7 [xc7a35ti, xc7a100t](https://www.xilinx.com/products/silicon-devices/fpga/artix-7.html) (memory (all) and spi flash (xc7a35ti) @@ -226,7 +228,7 @@ __file load:__ ```bash openFPGALoader -b arty *.runs/impl_1/*.mcs ``` -### MachXO3 Starter Kit +### MachXO2/MachXO3 Starter Kit #### Flash memory: @@ -235,16 +237,23 @@ special must be done to generates this file. __file load__: ```bash -openFPGALoader -b machXO3SK impl1/*.jed +openFPGALoader [-b yourboard] impl1/*.jed ``` +where *yourboard* may be: +* *machX02EVN* +* *machXO3SK* + #### SRAM: To generates *.bit* file **Bitstream file** must be checked under **Exports Files** in *Lattice Diamond* left panel. __file load__: ```bash -openFPGALoader -b machXO3SK impl1/*.bit +openFPGALoader [-b yourboard] impl1/*.bit ``` +where *yourboard* may be: +* *machX02EVN* +* *machXO3SK* ### Lattice ECP5 (Colorlight 5A-75b, Lattice ECP5 5G Evaluation board, ULX3S)