From 13e1a7a5b93d846a046a795f65e60f7cea8afcd2 Mon Sep 17 00:00:00 2001 From: dwarning Date: Wed, 7 Nov 2012 11:33:07 +0100 Subject: [PATCH] rm whitespaces --- src/spicelib/parser/inpdomod.c | 207 ++++++++++++++++----------------- 1 file changed, 103 insertions(+), 104 deletions(-) diff --git a/src/spicelib/parser/inpdomod.c b/src/spicelib/parser/inpdomod.c index 4a55bb6c3..3561bab81 100644 --- a/src/spicelib/parser/inpdomod.c +++ b/src/spicelib/parser/inpdomod.c @@ -31,17 +31,17 @@ char *INPdomodel(CKTcircuit *ckt, card * image, INPtables * tab) NG_IGNORE(ckt); line = image->line; - + #ifdef TRACE - printf("In INPdomodel, examining line %s . . . \n", line); -#endif - + printf("In INPdomodel, examining line %s . . . \n", line); +#endif + INPgetTok(&line, &modname, 1); /* throw away '.model' */ tfree(modname); INPgetTok(&line, &modname, 1); /* get model name */ INPinsert(&modname, tab); /* stick model name into table */ INPgetTok(&line, &type_name, 1); /* get model type */ - + /* ----- Check if model is a BJT --------- */ if (strcmp(type_name, "npn") == 0 || strcmp(type_name, "pnp") == 0) { err = INPfindLev(line,&lev); @@ -95,11 +95,11 @@ char *INPdomodel(CKTcircuit *ckt, card * image, INPtables * tab) #endif break; - } + } INPmakeMod(modname, type, image); } /* end if ((strcmp(typename, "npn") == 0) || (strcmp(typename, "pnp") == 0)) */ - /* -------- Check if model is a diode --------- */ + /* -------- Check if model is a diode --------- */ else if (strcmp(type_name, "d") == 0) { type = INPtypelook("Diode"); if (type < 0) { @@ -109,7 +109,7 @@ char *INPdomodel(CKTcircuit *ckt, card * image, INPtables * tab) } INPmakeMod(modname, type, image); } /* else if (strcmp(typename, "d") == 0) { */ - + /* -------- Check if model is a jfet --------- */ else if (strcmp(type_name, "njf") == 0 || strcmp(type_name, "pjf") == 0) { @@ -140,66 +140,66 @@ char *INPdomodel(CKTcircuit *ckt, card * image, INPtables * tab) } INPmakeMod(modname, type, image); } /* end else if ((strcmp(typename, "njf") == 0) */ - + /* -------- Check if model is a MES or an HFET --------- */ else if (strcmp(type_name, "nmf") == 0 || strcmp(type_name, "pmf") == 0 || strcmp(type_name, "nhfet") == 0 || strcmp(type_name, "phfet") == 0) { - err = INPfindLev( line, &lev ); - switch ( lev ) - { - case 0: - case 1: - type = INPtypelook("MES"); - if (type < 0) - { - err = INPmkTemp("Device type MES not available\n"); - } - break; - case 2: - type = INPtypelook("MESA"); - if (type < 0) - { - err = INPmkTemp("Device type MESA not availabe\n"); - } - break; - case 3: - type = INPtypelook("MESA"); - if (type < 0) - { - err = INPmkTemp("Device type MESA not availabe\n"); - } - break; - case 4: - type = INPtypelook("MESA"); - if ( type < 0) - { - err = INPmkTemp(" Device type MESA not available\n"); - } - break; - case 5: - type = INPtypelook("HFET1"); - if ( type < 0) - { - err = INPmkTemp(" Device type HFET1 not available\n"); - } - break; - case 6: - type = INPtypelook("HFET2"); - if ( type < 0) - { + err = INPfindLev( line, &lev ); + switch ( lev ) + { + case 0: + case 1: + type = INPtypelook("MES"); + if (type < 0) + { + err = INPmkTemp("Device type MES not available\n"); + } + break; + case 2: + type = INPtypelook("MESA"); + if (type < 0) + { + err = INPmkTemp("Device type MESA not availabe\n"); + } + break; + case 3: + type = INPtypelook("MESA"); + if (type < 0) + { + err = INPmkTemp("Device type MESA not availabe\n"); + } + break; + case 4: + type = INPtypelook("MESA"); + if ( type < 0) + { + err = INPmkTemp(" Device type MESA not available\n"); + } + break; + case 5: + type = INPtypelook("HFET1"); + if ( type < 0) + { + err = INPmkTemp(" Device type HFET1 not available\n"); + } + break; + case 6: + type = INPtypelook("HFET2"); + if ( type < 0) + { err = INPmkTemp(" Device type HFET2 not available in this binary\n"); - } - break; - - default: + } + break; + + default: err = INPmkTemp("only mesfet device level 1-4 and hfet level 5-6 supported\n"); - break; - } - INPmakeMod(modname, type, image); - } - + break; + } + INPmakeMod(modname, type, image); + } + /* -------- Check if model is a Uniform Distrib. RC line --------- */ else if (strcmp(type_name, "urc") == 0) { type = INPtypelook("URC"); @@ -209,7 +209,7 @@ char *INPdomodel(CKTcircuit *ckt, card * image, INPtables * tab) ("Device type URC not available in this binary\n"); } INPmakeMod(modname, type, image); - } + } /* -------- Check if model is a MOSFET --------- */ else if ((strcmp(type_name, "nmos") == 0) @@ -277,7 +277,7 @@ char *INPdomodel(CKTcircuit *ckt, card * image, INPtables * tab) break; case 8: case 49: err = INPfindVer(line, ver); - + if ( strcmp(ver, "3.0") == 0 ) { type = INPtypelook("BSIM3v0"); } @@ -328,7 +328,7 @@ char *INPdomodel(CKTcircuit *ckt, card * image, INPtables * tab) INPmkTemp ("Device type BSIM5 not available in this binary\n"); } - break; + break; case 16: type = INPtypelook("BSIM6"); if (type < 0) { @@ -344,7 +344,7 @@ char *INPdomodel(CKTcircuit *ckt, card * image, INPtables * tab) INPmkTemp ("Device type EKV not available in this binary\n"); } - break; + break; case 45: type = INPtypelook("psp102"); if (type < 0) { @@ -361,7 +361,7 @@ char *INPdomodel(CKTcircuit *ckt, card * image, INPtables * tab) INPmkTemp ("Placeholder: Device type B3SOIFD not available in this binary\n"); } - break; + break; case 56: type = INPtypelook("B3SOIDD"); if (type < 0) { @@ -369,7 +369,7 @@ char *INPdomodel(CKTcircuit *ckt, card * image, INPtables * tab) INPmkTemp ("Placeholder: Device type B3SOIDD not available in this binary\n"); } - break; + break; case 57: type = INPtypelook("B3SOIPD"); if (type < 0) { @@ -377,7 +377,7 @@ char *INPdomodel(CKTcircuit *ckt, card * image, INPtables * tab) INPmkTemp ("Placeholder: Device type B3SOIPD not available in this binary\n"); } - break; + break; case 10: case 58: type = INPtypelook("B4SOI"); if (type < 0) { @@ -385,8 +385,7 @@ char *INPdomodel(CKTcircuit *ckt, card * image, INPtables * tab) INPmkTemp ("Device type B4SOI V4.0 not available in this binary\n"); } - break; - + break; case 60: type = INPtypelook("SOI3"); if (type < 0) { @@ -418,12 +417,12 @@ char *INPdomodel(CKTcircuit *ckt, card * image, INPtables * tab) ("Only MOS device levels 1-6,8-10,14,44,45,49,54-58,60-62 are supported in this binary\n"); #else ("Only MOS device levels 1-6,8-10,14,49,54-58,60-62 are supported in this binary\n"); -#endif +#endif break; } INPmakeMod(modname, type, image); - } -#ifdef NDEV + } +#ifdef NDEV /* -------- Check if model is a numerical device --------- */ else if (strcmp(type_name, "ndev") == 0) { type = INPtypelook("NDEV"); @@ -433,8 +432,8 @@ char *INPdomodel(CKTcircuit *ckt, card * image, INPtables * tab) ("Device type NDEV not available in this binary\n"); } INPmakeMod(modname, type, image); - } -#endif + } +#endif /* -------- Check if model is a resistor --------- */ else if (strcmp(type_name, "r") == 0) { type = INPtypelook("Resistor"); @@ -444,8 +443,8 @@ char *INPdomodel(CKTcircuit *ckt, card * image, INPtables * tab) ("Device type Resistor not available in this binary\n"); } INPmakeMod(modname, type, image); - } - + } + /* -------- Check if model is a transmission line of some sort --------- */ else if(strcmp(type_name,"txl") == 0) { INPgetTok(&line,&val,1); @@ -478,7 +477,7 @@ char *INPdomodel(CKTcircuit *ckt, card * image, INPtables * tab) err = INPmkTemp( "Device type TransLine not available in this binary\n"); } - } + } /* -------- Check if model is a coupled transmission line --------- */ else if(strcmp(type_name,"cpl") == 0) { @@ -489,8 +488,8 @@ char *INPdomodel(CKTcircuit *ckt, card * image, INPtables * tab) } INPmakeMod(modname,type,image); - } - + } + /* -------- Check if model is a cap --------- */ else if (strcmp(type_name, "c") == 0) { type = INPtypelook("Capacitor"); @@ -500,7 +499,7 @@ char *INPdomodel(CKTcircuit *ckt, card * image, INPtables * tab) ("Device type Capacitor not available in this binary\n"); } INPmakeMod(modname, type, image); - } + } /* -------- Check if model is an ind --------- */ else if (strcmp(type_name, "l") == 0) { @@ -511,9 +510,9 @@ char *INPdomodel(CKTcircuit *ckt, card * image, INPtables * tab) ("Device type Inductor not available in this binary\n"); } INPmakeMod(modname, type, image); - } - - + } + + /* -------- Check if model is a switch --------- */ else if (strcmp(type_name, "sw") == 0) { type = INPtypelook("Switch"); @@ -523,8 +522,8 @@ char *INPdomodel(CKTcircuit *ckt, card * image, INPtables * tab) ("Device type Switch not available in this binary\n"); } INPmakeMod(modname, type, image); - } - + } + /* -------- Check if model is a Current Controlled Switch --------- */ else if (strcmp(type_name, "csw") == 0) { type = INPtypelook("CSwitch"); @@ -534,8 +533,8 @@ char *INPdomodel(CKTcircuit *ckt, card * image, INPtables * tab) ("Device type CSwitch not available in this binary\n"); } INPmakeMod(modname, type, image); - } - + } + /* -------- Check if model is a Lossy TransLine --------- */ else if (strcmp(type_name, "ltra") == 0) { type = INPtypelook("LTRA"); @@ -545,9 +544,9 @@ char *INPdomodel(CKTcircuit *ckt, card * image, INPtables * tab) ("Device type LTRA not available in this binary\n"); } INPmakeMod(modname, type, image); - } + } -#ifdef CIDER +#ifdef CIDER else if(strcmp(type_name,"numd") == 0) { err = INPfindLev(line,&lev); switch( lev ) { @@ -555,7 +554,7 @@ char *INPdomodel(CKTcircuit *ckt, card * image, INPtables * tab) default: type = INPtypelook("NUMD"); if(type < 0) { - err = + err = INPmkTemp ("Device type NUMD not available in this binary\n"); } @@ -563,7 +562,7 @@ char *INPdomodel(CKTcircuit *ckt, card * image, INPtables * tab) case 2: type = INPtypelook("NUMD2"); if(type < 0) { - err = + err = INPmkTemp ("Device type NUMD2 not available in this binary\n"); } @@ -577,7 +576,7 @@ char *INPdomodel(CKTcircuit *ckt, card * image, INPtables * tab) default: type = INPtypelook("NBJT"); if(type < 0) { - err = + err = INPmkTemp ("Device type NBJT not available in this binary\n"); } @@ -585,7 +584,7 @@ char *INPdomodel(CKTcircuit *ckt, card * image, INPtables * tab) case 2: type = INPtypelook("NBJT2"); if(type < 0) { - err = + err = INPmkTemp ("Device type NBJT2 not available in this binary\n"); } @@ -595,12 +594,12 @@ char *INPdomodel(CKTcircuit *ckt, card * image, INPtables * tab) } else if(strcmp(type_name,"numos") == 0) { type = INPtypelook("NUMOS"); if(type < 0) { - err = + err = INPmkTemp ("Device type NUMOS not available in this binary\n"); } INPmakeMod(modname,type,image); - } + } #endif /* CIDER */ /* type poly added by SDB . . . */ @@ -615,16 +614,16 @@ char *INPdomodel(CKTcircuit *ckt, card * image, INPtables * tab) ("Device type POLY not available in this binary\n"); } INPmakeMod(modname, type, image); - } -#endif - - /* -------- Default action --------- */ + } +#endif + + /* -------- Default action --------- */ else { -#ifndef XSPICE +#ifndef XSPICE type = -1; err = TMALLOC(char, 35 + strlen(type_name)); (void) sprintf(err, "unknown model type %s - ignored\n", type_name); -#else +#else /* gtri - modify - wbk - 10/23/90 - modify to look for code models */ #ifdef TRACE @@ -650,10 +649,10 @@ char *INPdomodel(CKTcircuit *ckt, card * image, INPtables * tab) INPmakeMod(modname,type,image); } - + /* gtri - end - wbk - 10/23/90 */ #endif - + } tfree(type_name); return (err);