#
# rcsid $Header: /usr/cvsroot/magic-8.0/Makefile,v 1.1.1.1 2008/02/03 20:43:49 tim Exp $
#

MAGICDIR   = .
# Absolute path to the source tree (config.status substitutes @abs_top_srcdir@).
# For an in-tree build this is the same directory as the build top.  Recursion
# into subdirectories goes through $(submake) (defined below).
MAGICSRC   = @abs_top_srcdir@
PROGRAMS   = magic
TECHS      = scmos
LIBRARIES  = database utils extflat
MODULES    = bplane cmwind commands database dbwind debug drc extflat \
	     extract graphics netmenu plow resis select sim textio tiles \
	     utils windows wiring

# This was `cat VERSION`
VERSION    := $(shell cat ${MAGICSRC}/VERSION)

MAKEFLAGS  =
INSTALL_CAD_DIRS = windows doc ${TECHS}

-include defs.mak

# "docs" when configure found latex+dvips (regenerate PostScript from .tex into
# the build tree), empty otherwise (the pre-built PostScript is installed as-is).
DOCS_TARGET = @DOCS_TARGET@

# $(call submake,<dir>,<goal>) -- recurse into a build subdirectory.
# Every module is a configure-generated Makefile, so config.status
# already created the build subdir with its Makefile: recurse natively.  The one
# exception is readline/, which is intentionally never converted; it has no
# generated Makefile, so it takes the -f path against the source Makefile (and its
# build subdir is created on demand).
define submake
if test "x$(1)" = xreadline; then mkdir -p $(1) && $(MAKE) -C $(1) -f $(MAGICSRC)/$(1)/Makefile $(2); else $(MAKE) -C $(1) $(2); fi
endef

all:	$(ALL_TARGET) techs $(DOCS_TARGET)

standard: mains

tcl: tcllibrary

force:
	@${MAKE} clean
	@${MAKE} all

defs.mak:
	@echo No \"defs.mak\" file found.  Run "configure" to make one.
	@exit 1

config:
	${MAGICSRC}/configure

# ---------------------------------------------------------------------------
# Declarative subdir recursion.
#
# Each (phase, dir) pair is a PHONY target "<phase>@<dir>" whose recipe recurses
# into <dir> with that phase's goal via $(submake) (so readline/ still takes the
# -f path).  A phase aggregate (depend, modules, libs, ...) is then just a list
# of its per-dir targets as prerequisites -- no shell `for` loops, no FORCE
# pattern-rule hack.  Ordering between phases is expressed as prerequisites on the
# per-dir targets (e.g. every module@ waits for `depend`), so the graph is correct
# under `make -jN`, not just left-to-right in a serial build.  '@' never appears
# in a real target name, so it is a safe namespace separator.
# ---------------------------------------------------------------------------

# main@<prog> / tcl-main@<prog>: link the final program(s) (PROGRAMS is "magic").
MAIN_TARGETS    := $(addprefix main@,${PROGRAMS})
TCLMAIN_TARGETS := $(addprefix tcl-main@,${PROGRAMS})
.PHONY: $(MAIN_TARGETS) $(TCLMAIN_TARGETS)
$(MAIN_TARGETS): main@%: ${DATABASE_H} modules libs
	@$(call submake,$*,main)
$(TCLMAIN_TARGETS): tcl-main@%: ${DATABASE_H} modules
	@$(call submake,$*,tcl-main)

.PHONY: tcllibrary mains
tcllibrary: $(TCLMAIN_TARGETS)
mains: $(MAIN_TARGETS)

# makedbh is the one generated helper script; it lives in the *build* tree.
# ${DATABASE_H} is $(builddir)/database/database.h in-tree, or
# $(builddir)/include/database/database.h when relocated (see defs.mak GENINC).
${DATABASE_H}: ${MAGICSRC}/database/database.h.in
	@echo --- making header file ${DATABASE_H}
	@mkdir -p $(dir ${DATABASE_H})
	${MAGICDIR}/scripts/makedbh ${MAGICSRC}/database/database.h.in ${DATABASE_H}

# "prepare" is the stable, path-independent way to (re)generate the build-time
# headers (currently database.h) before compiling -- use it instead of naming
# the header directly (its path depends on in-tree vs relocated; see GENINC).
# It is .PHONY so the name is always valid, but its prerequisite ${DATABASE_H}
# is a real file target, so the header is regenerated only when out of date.
.PHONY: prepare
prepare: ${DATABASE_H}

# module@<dir> builds <dir>/lib<dir>.o; lib@<dir> builds <dir>/lib<dir>.a.
# Every module@/lib@ waits for the whole `depend` phase first (it used to be a
# prereq of the `modules`/`libs` aggregates; moving it onto each per-dir target
# keeps depend before compilation even under -j).
MODULE_TARGETS := $(addprefix module@,${MODULES})
LIB_TARGETS    := $(addprefix lib@,${MODULES})
.PHONY: $(MODULE_TARGETS) $(LIB_TARGETS)
$(MODULE_TARGETS): module@%: depend
	@$(call submake,$*,module)
$(LIB_TARGETS): lib@%: depend
	@$(call submake,$*,lib)

.PHONY: modules
modules: $(MODULE_TARGETS)

.PHONY: libs
# libdatabase.a needs the tiles/utils module objects first.  Listing them before
# $(LIB_TARGETS) orders a serial build correctly; the explicit per-target -j edge
# is added in a later commit.
libs: module@tiles module@utils $(LIB_TARGETS)

#
# extcheck - utility tool
# net2ir   - utility tool
# oa       - disabled (needs 'clean' target renaming)
SUBDIRS = bplane cmwind commands database dbwind debug drc extflat extract graphics \
	  magic netmenu plow resis select sim textio tiles utils windows wiring

BUNDLED_MODULES = readline lisp

# Unique list of all subdir that might have Depend file, we have to deduplicate otherwise
# MAKE will warning loudly.  This list is somewhat empty when defs.mak does not exist
SUBDIRS_FILTERED := $(shell echo ${MODULES} ${PROGRAMS} ${SUBDIRS} | tr ' ' '\n' | sort | uniq)

SUBDIRS_DEPEND = $(addsuffix /Depend, ${SUBDIRS_FILTERED})

${SUBDIRS_DEPEND}: ${DATABASE_H}
	@echo --- making dependencies
	@$(call submake,$(patsubst %/,%,$(dir $@)),depend)

.PHONY: depend
depend: defs.mak ${SUBDIRS_DEPEND}

# tech@<dir>: build a technology dir (goal "all").
TECH_TARGETS := $(addprefix tech@,${TECHS})
.PHONY: $(TECH_TARGETS)
$(TECH_TARGETS): tech@%: depend
	@$(call submake,$*,all)

.PHONY: techs
techs: $(TECH_TARGETS)

# Regenerate the PostScript documentation from its .tex sources (only reached
# from "all" when configure found latex+dvips; see DOCS_TARGET).
.PHONY: docs
docs:
	@echo --- making documentation
	@${MAKE} -k -C doc/latexfiles all || \
	    echo "--- WARNING: some documents did not regenerate; the pre-built PostScript will be used for those at 'make install'"

install: $(INSTALL_TARGET)

install-magic:
	@echo --- installing executable to $(DESTDIR)${INSTALL_BINDIR}
	@echo --- installing runtime files to $(DESTDIR)${INSTALL_LIBDIR}
	@${MAKE} install-real

# install@<dir>: install one subdir's artifacts (CAD dirs, then the programs).
INSTALL_TARGETS := $(addprefix install@,${INSTALL_CAD_DIRS} ${PROGRAMS})
.PHONY: $(INSTALL_TARGETS)
$(INSTALL_TARGETS): install@%: install-dirs
	@$(call submake,$*,install)

install-real: $(INSTALL_TARGETS)

install-tcl-dirs:
	${SCRIPTS}/mkdirs $(DESTDIR)${INSTALL_BINDIR} \
	$(DESTDIR)${INSTALL_MANDIR} $(DESTDIR)${INSTALL_SYSDIR} \
	$(DESTDIR)${INSTALL_TCLDIR} $(DESTDIR)${INSTALL_TCLDIR}/bitmaps

install-dirs:
	${SCRIPTS}/mkdirs $(DESTDIR)${INSTALL_BINDIR} \
	$(DESTDIR)${INSTALL_MANDIR} $(DESTDIR)${INSTALL_SYSDIR} \
	$(DESTDIR)${INSTALL_SCMDIR}

install-tcl:
	@echo --- installing executable to $(DESTDIR)${INSTALL_BINDIR}
	@echo --- installing runtime files to $(DESTDIR)${INSTALL_LIBDIR}
	@${MAKE} install-tcl-real

# install-tcl@<dir>: install one subdir's Tcl-flavoured artifacts.
INSTALLTCL_TARGETS := $(addprefix install-tcl@,${INSTALL_CAD_DIRS} ${PROGRAMS})
.PHONY: $(INSTALLTCL_TARGETS)
$(INSTALLTCL_TARGETS): install-tcl@%: install-tcl-dirs
	@$(call submake,$*,install-tcl)

install-tcl-real: $(INSTALLTCL_TARGETS)

# clean@<dir>: clean one subdir if it exists.  Must not create dirs (skip absent
# ones) and must not fail the build (|| true).  readline/ uses the -f path
# (mirrors $(submake); it is the one unconverted module).
CLEAN_TARGETS := $(addprefix clean@,$(sort ${SUBDIRS_FILTERED} ${TECHS} ${BUNDLED_MODULES}))
.PHONY: $(CLEAN_TARGETS)
$(CLEAN_TARGETS): clean@%:
	@test -d $* || exit 0; \
	if test "x$*" = xreadline; then ${MAKE} -C $* -f ${MAGICSRC}/$*/Makefile clean; \
	else ${MAKE} -C $* clean; fi || true

.PHONY: clean
clean: $(CLEAN_TARGETS)
	${RM} *.tmp */*.tmp *.sav */*.sav *.log TAGS tags

distclean:
	touch defs.mak
	@${MAKE} clean
	# rules.mak is no longer copied into the build top (subdir Makefiles include
	# ${MAGICSRC}/rules.mak straight from the source tree), so there is nothing to
	# remove for it here; defs.mak is the only generated make fragment.
	${RM} defs.mak old.defs.mak
	${RM} scripts/makedbh scripts/default.conf
	${RM} config.log config.status
	${RM} ${DATABASE_H}
	${RM} scripts/magic.spec magic-${VERSION} magic-${VERSION}.tgz
	${RM} *.log

dist:
	${RM} scripts/magic.spec magic-${VERSION} magic-${VERSION}.tgz
	${SED} -e /@VERSION@/s%@VERSION@%${VERSION}% \
	    ${MAGICSRC}/scripts/magic.spec.in > scripts/magic.spec
	${LN} -nsf . magic-${VERSION}
	tar zchvf magic-${VERSION}.tgz --exclude CVS \
	    --exclude magic-${VERSION}/magic-${VERSION} \
	    --exclude magic-${VERSION}/magic-${VERSION}.tgz \
	    magic-${VERSION}

clean-mains:
	${RM} $(foreach p,${PROGRAMS},$p/$p)

tags:
	${RM} tags
	cd ${MAGICSRC} && find . ${MODULES} ${PROGRAMS} -name "*.[ch]" -maxdepth 1 | xargs ctags -o $(CURDIR)/tags

TAGS:
	${RM} TAGS
	cd ${MAGICSRC} && find . ${MODULES} ${PROGRAMS} -name "*.[ch]" -maxdepth 1 | xargs etags -o $(CURDIR)/TAGS

setup-git:
	git config --local include.path ../.gitconfig
	git stash save
	${RM} .git/index
	git checkout HEAD -- "$$(git rev-parse --show-toplevel)"
	git stash pop