/* local definitions */
#define	allContM1	ndc/m1,pdc/m1,nwc/m1,pwc/m1
#define	PNplusWOC	ndiff,pdiff,nnd/a,ppd/a

#define	CAPP	allPoly
#define	SSEPP	~(allPoly)/act
#define	SSEP1	~(allMetal1)/m1
#define	SSEP2	~(allMetal2)/m2
#define	SSEP3	~(allMetal3)/m3


/* Make sure local cap defs don't appear before regardless of what cpp does*/
#if defined(M1ContactsAct) \
    || defined (M1Contacts) \
    || defined (PNplusCap) \
    || defined (PolyCap) \
    || defined (M1Cap) \
    || defined (M2Cap) \
    || defined (M3Cap) \
    || defined (M1CapNoDiff) \
    || defined (NdRes) \
    || defined (PdRes) \
    || defined (M1Res) \
    || defined (PolyRes) \
    || defined (M2Res) \
    || defined (M3Res)
THERE_IS_AN_ERROR_SOME_LOCAL_CAPACITANCE_DEFINITIONS_HAVE_ALREADY_BEEN_DEFINED
#endif

/* Local capacitance definitions */
#define	M1ContactsAct	ndc,pdc,nwc,pwc,nbdc,capc,ec,clc,emc,pbc
#define	M1Contacts	M1ContactsAct,pc,via
#define	PNplusCap	(ndiff,pdiff,em,col,ppd,nnd,M1ContactsAct)/a
#define	PolyCap	(poly,pc)/a
#define	M1Cap	(m1,M1Contacts)/m1
#define	M2Cap	(m2,m2c,m3c,pad)/m2
#define	M3Cap	(m3,m3c,pad)/m3
#define	M1CapNoDiff	(m1,pc,via)/m1
#define	NDRes	(ndiff,nsd,ndc/act,nsc/act)
#define	PDRes	(pdiff,psd,pdc/act,psc/act)
#define	PolyRes	(poly,pc/act,pfet,nfet)
#define	M1Res	(metal1,m2c/metal1)
#define	M2Res	(metal2,via/m2,pad)
#define	M3Res	(metal3,pad/m3,via2/m3)


/* Use macros for planeorder and sideoverlap for backwards compatibility */
#if defined(V5)

#define	planeOrder(name,idx)	planeorder	name	idx
#define	noplaneOrdering	noplaneordering
#define	sideOverlap(l1,sep,l2,cap,shield) \
	sideoverlap	l1	sep	l2	cap	shield
#define Comma ,

#else /* V5 */

#define	planeOrder(name,idx)	
#define	noplaneOrdering	
#define	sideOverlap(l1,sep,l2,cap,shield) \
	sideoverlap	l1	sep	l2	cap	

#endif /* V5 */


#define	 extForSpice

/* 
   If you are using irsim-9.3 or older then you need to re-include 
   all the files without defining extForSpice so that the junction
   capacitances will be extracted from magic instead of being calculated
   from irsim-9.4 based on the values in the prm file and the s/d attributes
   produced from magic-6.5
*/

#if defined(STANDARD) /* include ORBIT 2um, AMI 1.6um, HP1.2, and HP1.0/0.8 */
#include "scmosExt100.tech.in"
#include "scmosExt080.tech.in"
#include "scmosExt060_orb.tech.in"
#include "scmosExt34.tech.in"
#include "scmosExt26b.tech.in"
#endif /* STANDARD */

#if defined(TIGHTMETAL)
#include "scmosExt34.tech.in"
#include "scmosExt26b.tech.in"
#include "scmosExt14b-tm.tech.in"
#endif

#if defined(SUBMICRON)
#include "scmosExt26b-sub.tech.in"
#include "scmosExt14b-sub.tech.in"
#endif

#include "scmosExtDiag.tech.in"