PlowRules1.c:439:9: warning: suggest parentheses around assignment used as truth value
PlowTech.c:645:17: warning: suggest parentheses around assignment used as truth value
PlowTech.c:652:17: warning: suggest parentheses around assignment used as truth value
PlowTech.c:1019:17: warning: suggest parentheses around assignment used as truth value
ResReadSim.c:270:13: warning: suggest parentheses around assignment used as truth value
ResReadSim.c:871:9: warning: suggest parentheses around assignment used as truth value
ResRex.c:1840:17: warning: suggest parentheses around assignment used as truth value
getrect.c:72:9: warning: suggest parentheses around assignment used as truth value
getrect.c:79:9: warning: suggest parentheses around assignment used as truth value
getrect.c:86:9: warning: suggest parentheses around assignment used as truth value
getrect.c:93:9: warning: suggest parentheses around assignment used as truth value
hash.c:732:16: warning: suggest parentheses around assignment used as truth value
heap.c:328:17: warning: suggest parentheses around assignment used as truth value
heap.c:344:17: warning: suggest parentheses around assignment used as truth value
netlist.c:323:17: warning: suggest parentheses around assignment used as truth value
niceabort.c:121:9: warning: suggest parentheses around assignment used as truth value
path.c:1102:12: warning: suggest parentheses around assignment used as truth value
pathvisit.c:245:13: warning: suggest parentheses around assignment used as truth value
pathvisit.c:295:17: warning: suggest parentheses around assignment used as truth value
tech.c:656:17: warning: suggest parentheses around assignment used as truth value
ext2spice.c:1591:16: warning: suggest parentheses around assignment used as truth value
ext2spice.c:1622:16: warning: suggest parentheses around assignment used as truth value
ext2spice.c:1813:12: warning: suggest parentheses around assignment used as truth value
ext2spice.c:1862:12: warning: suggest parentheses around assignment used as truth value
ext2spice.c:3808:16: warning: suggest parentheses around assignment used as truth value
CalmaRdio.c:437:9: warning: suggest parentheses around assignment used as truth value
CalmaWrite.c:396:9: warning: suggest parentheses around assignment used as truth value
CalmaWrite.c:1772:29: warning: suggest parentheses around assignment used as truth value
CalmaWriteZ.c:372:9: warning: suggest parentheses around assignment used as truth value
CalmaWriteZ.c:1608:29: warning: suggest parentheses around assignment used as truth value
CIFrdtech.c:209:9: warning: suggest parentheses around assignment used as truth value
CIFrdtech.c:214:9: warning: suggest parentheses around assignment used as truth value
CIFrdtech.c:220:9: warning: suggest parentheses around assignment used as truth value
CIFrdtech.c:226:9: warning: suggest parentheses around assignment used as truth value
CIFrdutils.c:1258:12: warning: suggest parentheses around assignment used as truth value
GCC14 -Wall cleanup series [-Wparentheses]
report it after "Failure to read in entire sub-tree". This will
not report every failing cell (since it quits reading after the
first failure) but will avoid the existing issue of printing
nothing and leaving the user with no feedback as to which cell
was the problem.
"gds readonly true" mode and when writing a GDS file in full-dump
mode. Reading or writing a file with an incompatible DBU is now
prohibited. This is not a great solution, as it forces the
original file to be rewritten with a different DBU. Preferably
there should be code to scale the units during a dump, but that
needs to be coded.
cell being generated. This statement does not disambiguate the
case where a cell is being ripped verbatim from GDS instead of
being generated from the magic database. This print statement
has been split into two cases, and where a cell is being ripped
verbatim, the name of the file is indicated. This provides better
information to the user.
previous behavior that had inadvertently been changed. In recent
versions, "load <absolute_path> -dereference" would incorrectly
apply the dereferencing to <absolute_path> rather than just its
subcells. Cleaned up the code around DBCellRead() in the process,
so everything is more straightforward (although probably more
could be done in that regard).
to "safer" strncpy() calls to prevent string buffer overflow.
Also: Reimplemented the loop in the GDS write routine that counts
ports and then outputs them in order. It was possible to hang
magic for a long time by giving a port a very, very large index
number. The new implementation uses qsort() to sort the ports
by index, which is obviously much more efficient for the worst
case (and efficient enough for all normal cases).
dereferencing, and making the behavior of "load" on the command
line (i.e., loading a cell from a file) the same as the
behavior of loading a cell as a result of expanding an unloaded
instance. In both cases, if "load -dereference" is used, and
a cell does not exist in any search path but does exist in the
original location, without dereferencing, then the cell will be
loaded from the original location. Also: Corrected an error
that has existed since adding the capability to read compressed
files, which causes magic to crash when attempting to run the
"crash recover" command (because that routine was mixing
compressed and regular file stream calls).
"cif *hier write disable" and "cif *array write disable" commands
for a specific cell def and its descendents. The revision ensures
that all descendents apply the override. The "cif write" command
uses a stack instead of recursion, which makes it difficult to
apply the same method. Currently the method only works for the
"gds write" command, and implementing the feature for "cif write"
is deemed not worth the effort.
tech file to correct the underlying problem with the SkyWater
sky130 process in which a different layer/purpose pair is used
for TEXTTYPE and DATATYPE for the same layer. Previously, all
output from magic writes the same pair for both when writing a
port label. The new method preserves existing syntax, although
there are some differences based on what order the "port"
statement appears relative to other types for the same layer.
due to a missing function prototype. Modified the GDS output
flow to always output instance IDs as a property, not just in the
non-default case. The property has been used for many years and
appears to be accepted by all tools reading GDS, so there is no
downside to always generating this output. This has the upside
that default instance names don't get scrambled by going from
magic to GDS and back to magic.
for the squares-grid operator and for GDS compression. But I
reverted the "calma contact" option to be false by default, because
the method does not exactly match the output when not using cell
instance arrays, and so may produce unexpected results. Will
need a different implementation that uses the same code to generate
the same (effective) layout.
default behavior of magic to make use of the "gds contacts true"
option to output contacts as arrays of subcells instead of
individual boundary entries, as the former is much more efficient
than the latter. Set the option to be true by default, and set
the "gds flatglob" option to have one entry "$$*$$" corresponding
to the contact subcells created by the "gds contacts" option, so
that GDS reads and writes as it did previously (but using a
different method). Expanded the method to include "squares-grid"
and "slots" operators (the latter should produce much more
efficient fill pattern arrays). Implemented for both compressed
and uncompressed GDS. Tested in all variations.
attempt is made to write an abstract view to GDS. This behavior can
be overridded with the new command option "gds abstract [enable|disable]".
Also: Corrected extraction to allow split tiles to be set as the
reference tile for a node. Previously this was allowed only if the
tile was the first to be searched, but that can cause different tiles to
be marked as the reference depending on where the search starts,
resulting in different names for the same node in .ext files, which is
bad. Also: Modified the LEF annotation to avoid bad entries in the LEF
that would create layers in the layout where none exist.
This commit makes the code (mostly) C99-compatible, enabling to compile
it without the -Wno-error=implicit-function-declaration flag. This
way, Magic becomes usable on arm64 architectures, specifically on Apple
computers with M1/M2 SoC.
calculation of the area to check for output and the clip box
does not reduce the size of any layer associated with the
fixed bounding box declared by the FIXED_BBOX property.
polygon cell has been created with the "gds polygon subcell"
option and the parent cell is read-only (vendor GDS), then the
polygon cell does not actually exist in the original GDS and
should not be output during a "gds write".
Compression levels of the output can be controlled with the "gds
compress [<value>]" command, where <value> 0 (default) is uncompressed
output, 6 is "normal" gzip compression, and 9 is maximum compression.
pointing GDS_FILE to a compressed filename when using "gds readonly
true" on a compressed file. The start and end pointers still point
to data bounds in the uncompressed file.
of systems calls to "gzip" and "gunzip". A compressed GDS file can
be made simply by doing "gds write <name>.gds.gz", and can be read
simply by doing "gds read <name>.gds.gz". Names of compressed files
can be put in the GDS_FILE property of a cell.
"gds datestamp <value>" as an option to force a specific datestamp
on the GDS output. This is a third option beyond the previous two
which were either to use the current time or to write zero. The
new option allows an entire library to get a common timestamp, for
example, related to a PDK version number. The "gds nodatestamp"
option has been retained for backwards compatibility.
this limited ports to 16384, which seemed reasonable at the time.
However, the sky130_sram_macro layouts connect power and ground in a
way that when coupled with "extract unique" can generate tens of
thousands of ports and overrun the bit field, showing that automation
can do the unexpected. The solution was to split out the port number
from the label record as its own 32-bit value.
it is easy to subvert the process by updating GDS without updating
the pointers, it is trivial to end up with bad GDS output. The
sanity checks confirm that the position pointed to is a complete
structure (check begin and end records), and that it has the same
name as the cell (this is not a requirement, as there are reasons
one might want to point to data from a structure of a different
name, but a warning will be printed).
cell is referenced by a GDS "addendum" file but is not in either
the tree of the root def or any other dumped GDS file, then check
the database for those files and output them if they exist. This
allows one way to get around missing cells in the GDS output if a
cell from a GDS addendum is used but no cells from the library
that the file is an addendum of are used.
introduced: The use of substitutions for PDKPATH and home directory
in path names for GDS files referenced in abstract views, and the
"gds addendum" option. Both were interfering with magic's handling
of writing GDS files from abstract layout views.
from 98 (arbitrarily selected) to 61 (apparently commonly used by
other tools). This should help increase compatibility with GDS
files output from other tools.
worded warning if an abstract cell view is written to GDS.
Corrected the "cellname ... writeable" command to allow an
overrride of the read-only status of a cell. That change had
been made before but apparently got reverted by the recent
rollback.
cell def that is marked for a "full dump" from a referenced GDS
file. This change was supposed to have been done a few commits
ago but did not work as advertised.
magic database derived layout of a cell that declares GDS_FILE
but for which the GDS file referenced cannot be found or read.
This will produce an incomplete GDS file instead of an apparently
good and complete GDS file that actually contains bad data. Also:
Added new command "random" that allows a random seed to be set,
for use with the GDS output when writing a full dump of a GDS
file. Otherwise, the output prefixes are always the same, which
defeats the purpose of adding the random prefix.
to stop the search whenever a cell is not found. Used this to implement
a new option for GDS writes, "gds undefined allow|disallow" (default
"disallow") controls whether or not GDS with undefined references will
be allowed to be written. Similarly affects CIF and LEF writes, extraction,
and DRC (when running "drc check" from the top).
"gds write" command, since "Writing cell" is easily confused with
writing a .mag database file. "Generating output" seems clearer
to me. Maybe it's just me.
true, this will force the "gds write" command to write out creation
date stamps as zero. This is very useful for avoiding changing the
contents of an otherwise-unchanged layout, especially if it is in
a git repository where it will force the entire file to be replaced.
hierarchical processing from CIFGenSubcells() and CIFGenArrays(), and to
avoid certain operators that are useless and harmful when applied
hierarchically; namely squares, slots, bbox, boundary, and net.
templayers. This permits some useful interactions like growing to
the size of a bounding box, or abutment box, as well as many other
possibilities. Also: Corrected the use of "cif see" for the boundary
(abutment box) layer, which was not working because the "cif see"
command uses a flattened CellDef that does not have the boundary
property of the cell it was flattened from.
Darryl L. Miles
Tim Edwards
Johan Euphrosine
Alessandro De Laurenzis