luke
/
magic
mirror of https://github.com/RTimothyEdwards/magic.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
magic/scmos/extract_template/scmosExt14b-sub.tech.in

165 lines
5.1 KiB
Plaintext
Raw Normal View History

Initial commit at Tue Apr 25 08:41:48 EDT 2017 by tim on stravinsky
2017-04-25 14:41:48 +02:00
/*
This is for HP's CMOS26B 1.0 micron CMOS Bulk Process.
All parameters are defined based on HP's general process
specifications (GPP). Sidewall fringing was taken from
Ersatco fictitious process (johnson,jouppi).
Upwards fringe caps (eg poly-->m1, poly-->m2) are computed
by the program scaleCap by using the Sakurai/Tamaru formula
based on the known capacitances.
*/
#ifdef extForSpice
style lambda=0.30
#else
style lambda_irsim=0.30
#endif
lambda 30
step 100
sidehalo 10 /* 4 more than min m3 spacing */
#ifdef INCLUDE_FET_CAP /* Normally off since neither spice or irsim need it */
areacap allFet 692 /* af/lambda^2 */
#endif
/* ------------ diff capacitances ---------------- */
areacap nwell 19 /* 208aF/um2*/
perimc nwell ~(nwell) 60 /* scale the 26b value */
#ifdef extForSpice
areacap (ndiff,nsd,ndc,nsc)/a 0
perimc (ndiff,nsd,ndc,nsc)/a space,pwell 0
areacap (pdiff,psd,pdc,psc)/a 0
perimc (pdiff,psd,pdc,psc)/a space,nwell 0
#else
/* Real perim values increased a little to
compensate for not counting CJGATE */
areacap (ndiff,nsd,ndc,nsc)/a 23
perimc (ndiff,nsd,ndc,nsc)/a space,pwell 160
/* field - 320aF/um */
/* gate - 614aF/um */
areacap (pdiff,psd,pdc,psc)/a 52
perimc (pdiff,psd,pdc,psc)/a space,nwell 90
/* field - 213aF/um */
/* gate - 332aF/um */
#endif
/* ------------------------------------------------------ */
/* ------------ poly capacitances ---------------- */
areacap PolyCap 8.2
overlap PolyCap allWell 8.2
perimc PolyCap ~PolyCap 12.6
Finally rid myself of the C preprocessor. Took a moderately-developed preproc.py script from another project. Had to further develop it to get around the amazingly complicated preprocessor usage in the scmos subdirectory. Needed to add handling of parameterized definitions; could not figure out how to align the syntax used in scmos/extract_template with any consistent syntax. Gave up and rewrote some of the contents of extract_template to avoid the more ambiguous usage. All of this is to support a completely deprecated scmos.tech. However, it does avoid both the M4 and cpp preprocessors altogether. Also did auto-detection of python3 in the configure script for use of the preproc.py preprocessor, and applied the same preprocessor to the macro definitions.
2020-02-19 20:25:58 +01:00
sideOverlap(PolyCap, ~PolyCap, allWell, 12.6, )
sideOverlap(PolyCap, ~PolyCap, M1Cap, 5.7, )
Initial commit at Tue Apr 25 08:41:48 EDT 2017 by tim on stravinsky
2017-04-25 14:41:48 +02:00
sideOverlap(PolyCap, ~PolyCap, M2Cap, 2.7, M1Cap)
Finally rid myself of the C preprocessor. Took a moderately-developed preproc.py script from another project. Had to further develop it to get around the amazingly complicated preprocessor usage in the scmos subdirectory. Needed to add handling of parameterized definitions; could not figure out how to align the syntax used in scmos/extract_template with any consistent syntax. Gave up and rewrote some of the contents of extract_template to avoid the more ambiguous usage. All of this is to support a completely deprecated scmos.tech. However, it does avoid both the M4 and cpp preprocessors altogether. Also did auto-detection of python3 in the configure script for use of the preproc.py preprocessor, and applied the same preprocessor to the macro definitions.
2020-02-19 20:25:58 +01:00
sideOverlap(PolyCap, ~PolyCap, M3Cap, 1.8, M1CapCommaM2Cap)
Initial commit at Tue Apr 25 08:41:48 EDT 2017 by tim on stravinsky
2017-04-25 14:41:48 +02:00
sidewall PolyCap ~PolyCap ~PolyCap PolyCap 7.2
/* ------------------------------------------------- */
/* ------------ metal1 capacitances ---------------- */
areacap M1Cap 3.5
overlap M1Cap allWell 3.5 PolyCap,PNplusCap
overlap M1Cap PNplusCap 5.7
overlap M1Cap PolyCap 5.7
perimc M1Cap ~M1Cap 15
Finally rid myself of the C preprocessor. Took a moderately-developed preproc.py script from another project. Had to further develop it to get around the amazingly complicated preprocessor usage in the scmos subdirectory. Needed to add handling of parameterized definitions; could not figure out how to align the syntax used in scmos/extract_template with any consistent syntax. Gave up and rewrote some of the contents of extract_template to avoid the more ambiguous usage. All of this is to support a completely deprecated scmos.tech. However, it does avoid both the M4 and cpp preprocessors altogether. Also did auto-detection of python3 in the configure script for use of the preproc.py preprocessor, and applied the same preprocessor to the macro definitions.
2020-02-19 20:25:58 +01:00
sideOverlap(M1Cap, ~M1Cap, allWell, 15, PolyCapCommaPNplusCap)
sideOverlap(M1Cap, ~M1Cap, PNplusCap, 17.4, )
sideOverlap(M1Cap, ~M1Cap, PolyCap, 17.4, )
sideOverlap(M1Cap, ~M1Cap, M2Cap, 8.7, )
Initial commit at Tue Apr 25 08:41:48 EDT 2017 by tim on stravinsky
2017-04-25 14:41:48 +02:00
sideOverlap(M1Cap, ~M1Cap, M3Cap, 4.8, M2Cap)
sidewall M1Cap ~M1Cap ~M1Cap M1Cap 19.2
/* ------------------------------------------------- */
/* ------------ metal2 capacitances ---------------- */
areacap M2Cap 1.3
overlap M2Cap allWell 1.3 PolyCap,M1Cap,PNplusCap
overlap M2Cap PNplusCap 1.5 M1Cap
overlap M2Cap PolyCap 1.5 M1Cap
overlap M2Cap M1Cap 3.5
perimc M2Cap ~M2Cap 12.3
Finally rid myself of the C preprocessor. Took a moderately-developed preproc.py script from another project. Had to further develop it to get around the amazingly complicated preprocessor usage in the scmos subdirectory. Needed to add handling of parameterized definitions; could not figure out how to align the syntax used in scmos/extract_template with any consistent syntax. Gave up and rewrote some of the contents of extract_template to avoid the more ambiguous usage. All of this is to support a completely deprecated scmos.tech. However, it does avoid both the M4 and cpp preprocessors altogether. Also did auto-detection of python3 in the configure script for use of the preproc.py preprocessor, and applied the same preprocessor to the macro definitions.
2020-02-19 20:25:58 +01:00
sideOverlap(M2Cap, ~M2Cap, allWell, 12.3, M1CapCommaPolyCapCommaPNplusCap )
Initial commit at Tue Apr 25 08:41:48 EDT 2017 by tim on stravinsky
2017-04-25 14:41:48 +02:00
sideOverlap(M2Cap, ~M2Cap, PNplusCap, 12.9, M1Cap)
sideOverlap(M2Cap, ~M2Cap, PolyCap, 12.9, M1Cap)
Finally rid myself of the C preprocessor. Took a moderately-developed preproc.py script from another project. Had to further develop it to get around the amazingly complicated preprocessor usage in the scmos subdirectory. Needed to add handling of parameterized definitions; could not figure out how to align the syntax used in scmos/extract_template with any consistent syntax. Gave up and rewrote some of the contents of extract_template to avoid the more ambiguous usage. All of this is to support a completely deprecated scmos.tech. However, it does avoid both the M4 and cpp preprocessors altogether. Also did auto-detection of python3 in the configure script for use of the preproc.py preprocessor, and applied the same preprocessor to the macro definitions.
2020-02-19 20:25:58 +01:00
sideOverlap(M2Cap, ~M2Cap, M1Cap, 15, )
sideOverlap(M2Cap, ~M2Cap, M3Cap, 10.8, )
Initial commit at Tue Apr 25 08:41:48 EDT 2017 by tim on stravinsky
2017-04-25 14:41:48 +02:00
sidewall M2Cap ~M2Cap ~M2Cap M2Cap 21.6
/* ------------------------------------------------- */
/* ------------ metal3 capacitances ---------------- */
areacap M3Cap .81
overlap M3Cap allWell .81 PolyCap,M1Cap,M2Cap,PNplusCap
overlap M3Cap PNplusCap .88 M1Cap,M2Cap
overlap M3Cap PolyCap .88 M1Cap,M2Cap
overlap M3Cap M1Cap 1.3 M2Cap
overlap M3Cap M2Cap 3.3
perimc M3Cap ~M3Cap 12.3
Finally rid myself of the C preprocessor. Took a moderately-developed preproc.py script from another project. Had to further develop it to get around the amazingly complicated preprocessor usage in the scmos subdirectory. Needed to add handling of parameterized definitions; could not figure out how to align the syntax used in scmos/extract_template with any consistent syntax. Gave up and rewrote some of the contents of extract_template to avoid the more ambiguous usage. All of this is to support a completely deprecated scmos.tech. However, it does avoid both the M4 and cpp preprocessors altogether. Also did auto-detection of python3 in the configure script for use of the preproc.py preprocessor, and applied the same preprocessor to the macro definitions.
2020-02-19 20:25:58 +01:00
sideOverlap(M3Cap, ~M3Cap, allWell, 12.3, PNplusCapCommaPolyCapCommaM1CapCommaM2Cap)
sideOverlap(M3Cap, ~M3Cap, PNplusCap, 12.9, M1CapCommaM2Cap)
sideOverlap(M3Cap, ~M3Cap, PolyCap, 12.9, M1CapCommaM2Cap)
sideOverlap(M3Cap, ~M3Cap, M1Cap, 15.3, M2Cap)
sideOverlap(M3Cap, ~M3Cap, M2Cap, 19.2, )
Initial commit at Tue Apr 25 08:41:48 EDT 2017 by tim on stravinsky
2017-04-25 14:41:48 +02:00
sidewall M3Cap ~M3Cap ~M3Cap M3Cap 34.3
/* ------------------------------------------------- */
/* Unchanged yet for .35um*/
/* -------------- Fets -----------------------------*/
/* cscab, cscap defined since extresis needs them */
/* gate cap is actually 982aF/um^2 or .344fF/um*/
fet pfet pdiff,pdc 2 pfet Vdd! nwell 218 88
fet nfet ndiff,ndc 2 nfet Gnd! pwell 267 88
/* These values are the equivalent resistance that irsim params for
3.3 V 85C */
fetresis nfet linear 8500 /* resistance dyn L */
fetresis pfet linear 24500 /* resistance dyn H */
fetresis nfet saturation 8500 /* resistance dyn L */
fetresis pfet saturation 24500 /* resistance dyn H */
/* ------------------------------------------------- */
/* -------------- Resistivity (in milliohms per sq) -------*/
/* ---- assumed temp 85 C ----- */
resist NDRes 3100
resist PDRes 2500
resist PolyRes 7500 /*4400 for W>1.0um*/
resist M1Res 83
resist M2Res 84
resist M3Res 41
resist nwell 1980000 /*unchanged from 26b*/
/* Values are for per contact */
contact pc 4 10000 /*8k-nom 15k-max*/
contact ndc,pdc,nsc,psc 4 4500
contact m2c 4 1000
contact m3c 4 1000
/* ------------------------------------------------- */
/* Order the planes for correct shielding */
planeOrder(implant,0)
planeOrder(well,1)
planeOrder(active,2)
planeOrder(metal1,3)
planeOrder(metal2,4)
planeOrder(metal3,5)
planeOrder(oxide,6)