It is possible for the compiler to generate logic gates that have
inputs from part select nodes. This implements the part select
input methods.
Signed-off-by: Stephen Williams <steve@icarus.com>
This patch fixes an incorrect optimization that was skipping a
call to set the port width when there was no width (a scalar).
The problem with this is that since a (0,0) pair was not added
to the list, later when the width was define to (1,0) the checking
code did not have the (0,0) to tell that there was a mismatch in
the port size. Section 12.3.3 States that the two sizes shall be
identical, so yes this is an error even though it is very minor.
This patch makes vpiFullName for real variables return the correct
value. A Scope reference was added to the base structure along with
the relevant code to support generating the full name. A couple of
memory leaks were plugged and some formatting fixed as well.
It appears that other simulators allow the second argument to
vpi_handle_by_name to be either a scope or a module. Allowing
a module in addition to a scope significantly increases the
usability of this function.
vpi_get_str() can now return a reasonable value for most of the
types used in vvp. I'm not certain I got all of them, but they
are easy to add if any are missing. I also fixed a couple of
typos that I found while looking for all the different types.
Real value constants have width 1 in Icarus Verilog. This is not
the same as the output from $bitstoreal, which is *not* a real
valued expression but a logic vector that losslessly carries the
real value.
Also remove unused CVS markings.
Signed-off-by: Stephen Williams <steve@icarus.com>
This patch adds the missing vpiFullName property to binary and
string parameters (FYI real parameters are not currently supported
by the VPI interface).
This patch implements the swrite* and sformat system tasks. It also
makes $simtime distinguishable from the other integer time tasks.
This was needed to get the correct time units when $simtime was given
as an argument to $swrite*. The string constant code was also modified
to allow a string to be returned as a vector (0/1 bit pattern).
Here are some more specifics about the swrite* changes.
1. They do not share formatting code with the other display functions,
so they may/will produce different results.
2. All %{alpha} codes allow a width and justification. Others have been
enhanced (%t allows the default width and precision to be overridden,
time functions print with time formatting, better error checking and
messages, etc.).
3. %u and %z formatting codes have been added. It is important to note
that these two formats can produce embedded NULLs, since these
functions are returning a string anything after the first NULL will
not be reachable! memcpy is used instead of regular string processing
where needed so that the original string will contain the total
result. The size returned when the string is created is the true
length. A warning will be printed if a string with embedded NULLs is
produced (strlen() does not match the true length).
4. Real numbers are printed with %g instead of %f.
Once this new formatting code has been evaluated we should incorporate
the changes/fixes into the formatting code for the other functions or
the other functions could be modified to use this new code. The true
string length is available so we should be able to work around the
embedded NULL problem.
The calculated return value for the calculated strength value of
a net was left dangling. This patch fixes that. See pr1770199 in
the regression test suite.
Signed-off-by: Stephen Williams <steve@icarus.com>
distinguish between self-determined and value-preserving when
evaluating constants that are arguments to concatenations.
Signed-off-by: Stephen Williams <steve@icarus.com>
Support initialization assignments of real value variables. In the
process, clean up the processing of real variable declarations in
the parser.
Signed-off-by: Stephen Williams <steve@icarus.com>
The standard states that the seed for the random functions should be
an integer/time variable or a register. This patch fixes the compiletf
routines to check for this. There is also a small patch to
vvp/vpi_signal.cc that removes an assert that was failing and replaces
it with appropriate code. The assert was verifying that the source was
not bigger than an integer. The problem with this is that a time
variable or register may be bigger than an integer. I altered the code
to remove the assert and copy only the lower (8 * sizeof integer) bits.
The potential overflow/loss of precision is not checked. This passes
the regression tests.
Delat the compiletf calls until after all the label references
are resolved and link bindings are complete. Otherwise, there may
be dangling references.
Signed-off-by: Stephen Williams <steve@icarus.com>
This patch adds a compiletf routine to the $deposit system task and
simplifies the calltf routine. It also patches the constant string code
to return an appropriate integer value when needed. A number of compiletf
routines that check for this can now be simplified since this (string
constants) no longer causes an assert in an integer environment.
Better handle cases where the scope part of a heirarchical name does
not match any existing scope, or where scope index expressions are
not correct.
Signed-off-by: Stephen Williams <steve@icarus.com>
In rare cases, the reduction logic nodes may get vector part inputs.
This patch adds support for vector parts entering a reduction node.
Signed-off-by: Stephen Williams <steve@icarus.com>
This fixes r-value type references to memory words for memories
that have a non-zero base address. Elaborate the expression
needed to get the canonical word index.
The port input count assertion was triggering incorrectly. It was
comparing the count with the bytes instead of bits in a word.
Signed-off-by: Stephen Williams <steve@icarus.com>
The argument passed to $finish and $stop is not currently used, but it
is now passed down to the functions that may someday do something
useful with it (schedule_finish() and schedule_stop() in vvp/schedule.cc).
Add the missing probabilistic functions and add compiletf routines
for all the functions. The original calltf routines have been
modified as appropriate. The base functions are straight copies
from the standard. I have visually verified the curves with 5,000
points and they look correct.
Even though vpiFinish does not currently do anything with it's
argument I thought it would be best to have them all be in the
correct range [0, 1, 2], so they have been updated as appropriate.
Handle real valued expressions in vector declarations. Also clean
up the handling of vector declaration expressions.
Signed-off-by: Stephen Williams <steve@icarus.com>
Nil parameter overrides can turn up in positional paramter override
lists, where items are intentionally skipped.
Signed-off-by: Stephen Williams <steve@icarus.com>
Be careful to include bitwise differences in double values, because
it is the bit pattern we are passing aroung, not the arithmetic value.
Signed-off-by: Stephen Williams <steve@icarus.com>
The runtime is a vvp runtime engine debug aid that allows for
detailed dump into a debug log. The trace is enabled by setting
the VVP_DEBUG variable and activating specific debug messages
in the vvp source.
Signed-off-by: Stephen Williams <steve@icarus.com>
Make varable drivers (reg vectors and real) propagate their initial
values using a special init scheduler queue. This causes the net to
be loaded with reasonable initial values.
Signed-off-by: Stephen Williams <steve@icarus.com>
Non-constant indexed part select in continuous assignment generates
a select node with the correct width. In the process factor out and
share some of the part select calculations with expr part select
handling methods.
Signed-off-by: Stephen Williams <steve@icarus.com>
Words of net arrays were incorrectly added to the scope. They should
only be attached to the array, and accessed as a word of the array.
Signed-off-by: Stephen Williams <steve@icarus.com>
Real value are vector width of 1, fix real literal to reflect this.
fix leaking real registers in code generation for function arguments.
Load of signal should handle conversion from real to vector. Function
arguments, type vector passed a real value, are an example where this
comes up.
Signed-off-by: Stephen Williams <steve@icarus.com>
Backslash-escapes are processed early, during elaboration, so that
escaped characters show up in all places with the calculated value.
This means the $display formatting will get processed strings and
should not process back-slashes again.
Signed-off-by: Stephen Williams <steve@icarus.com>
Stephen Williams
Cary R
Martin Whitaker
Larry Doolittle