There was a single message when the expression width was larger
than the port width. This patch makes it a bit more clear by
saying that the expression was pruned.
Currently the compiler coerces input ports to inout ports whenever
there is an internal driver connected to the internal port net.
This generates an error if the port is externally connected to
something other than a structural net. This patch modifies the
compiler to ensure port coercion only occurs in valid cases.
This patch adds support for tracing procedural statement execution in vvp.
This is accomplished by adding a new opcode that is inserted before the
code that represents a procedural statement. These opcodes also trigger
a message whenever time advances. By default these opcodes are not added.
To add them, pass the -pfileline=1 flag to the compiler. In the future we
may add support for turning the debug output on and off once the opcodes
have been added with a system task or from the interactive prompt.
This patch removes the code that was deleting the signals in an L-value
concat if the concatenation failed to elaborate. This is incorrect since
the signal could be used in another context that is processed later. The
error message when an output/inout port fails to elaborate was also
improved to give the expression that is connected to the port.
This patch fixes a bunch of objects to have the correct file/line
information. It also adds support for getting file/line information
for events (named events have a definition line).
This patch adds/fixes the following:
Adds file/line information to a UDP definition.
Prints an error message if a UDP is passed signals wider than 1 bit.
A UDP should supports a range, but the compiler currently does not.
Add scope information for constants.
Fix the Icarus extension UDP table entry element 'h' to use h.
The ivl_udp_init() value is a char not unsigned.
Add FILE_NAME() for a bunch more of the ivl interface objects.
The compiler currently performs parameter expression elaboration before
performing parameter overrides. This means that the information needed
to correctly determine the expression type and width may not be available
at the time elaboration is performed. This patch reworks the code to
delay elaboration until after all overrides have been performed. It
also provides a new -g option that controls how the width of parameter
expressions is calculated when the parameter itself is unsized.
This patch covers more than it should. It removes many of the -Wextra
warnings in the main ivl directory. It also makes some minor code
improvements, adds support for constant logicals in eval_tree (&&/||),
adds support for correctly sign extending === and !==, it starts to
standardize the eval_tree debug messages and fixes a strength bug
in the target interface (found with -Wextra). The rest of the warnings
and eval_tree() rework will need to come as a second patch.
This patch changes all the iterator code to use a prefix ++ instead
of postfix since it is more efficient (no need for a temporary). It
is likely that the compiler could optimize this away, but lets make
it efficient from the start.
I'm adding more uses of the make_range_from_width function, so
it seems like time to get rid of its use of the svector template.
This thread led to a lot of other uses of svector that had to
also be removed.
BOOL values have a specific cast from LOGIC, this node takes care
of it. Also arrange for the elaboration to insert them in the right
planes and for the code generator to generate them.
This patch adds the ability to call a system function as a task for
the SystemVerilog generation (-g2009). The return value is really
calculated, but it is ignored.
This patch adds support for a UDP with variable delays. In the process the
intrinsic support for delays was removed from the UDP functor and replaced
with a call to the .delay functor. Both a normal gate and a UDP now use the
same code to generate the delay.
This patch adds checks that the delay count is correct for the
various gates and adds support for a missing variable decay
time. For this case the decay time is the minimum of the rise
and fall times. This is denoted by setting the decay variable
to 0 in the vvp file. vvp notes this and sets an ignore decay
time property in the base delay. This turns off the ability
to set the decay time and the minimum delay calculation will
also update the decay time.
This patch pushes delays for tranif gates to the code generator.
We still need to add checks for the number of delays, etc. For
now an error message is printed when a tranif gate is given a
non-zero delay.
Elaborate conditional assignments with BUFZ devices that do *NOT*
preserve strengths. Add a BUFT (transparent) device that can be
used in those cases where I really need a transparent buffer.
A real delay must be scaled and rounded using the local precision
before it is finally scaled to the simulation time units. This
patch fixes the compiler to do this correctly or generate the
correct code for run time calculated delays. Delays in a CA
already worked correctly. The run time was also fixed to scale
modpath (SDF back annotation) delays correctly.
Some new shadow issues have crept in. This patch fixes these new
issues and adds -Wshadow to the normal warning flags to keep any
new occurrences from happening.
The repeat expression is evaluated in a self determined context
(expression width == -1). It needs to call probe_expr_width() to
figure out the width needed by the expression before calling
elab_and_eval() to elaborate the expression.
This patch adds support for converting bit based ports to real signals.
You can only do this for single instances. Arrayed instance would
create multiple instances driving the same real signal.
Any real port can be connected to a bit based signal. The only limitation
is that the signal width must be an integer multiple of the instance
count since all the real conversions must have the same width.
Also add an error message for an arrayed instance with real to real
output connections. Again multiple drivers.
This patch also adds errors for inout real and bit based inout ports
driving a real signal. There is no logical way to deal with the full
capabilities of inout and real ports/signals. So for now they are not
allowed.
This patch cleans up some style issues: no need to check that a value
is defined before freeing or deleting it, use C++ style casts, make
sure to NULL terminate strncpy(), empty() is faster than size() for
size == 0 or size >= 0 checks, re-scope some variables, etc.
A named event does not have an edge so taking a posedge or negedge
is illegal. This patch adds an error message for this. Before the
edge was being ignored for named events, but this is incompatible
with other tools.
Creation of implicit nets requires knowledge of whether an identifier
has been declared before it is used. Currently implicit nets are
created during elaboration, but by this stage the order of declaration
and use is not known. This patch moves the creation of implicit nets
into the parser stage.
The Cygwin compiler is a bit picky. This patch adds some casts
to remove compilation warnings. In the past I have had warnings
off because of problems with the STL, but for this directory we
mas as well remove the warnings we can. It also does not
recognize that an assert(0) or assert(false) ends a routine so
it complains about no return at end of function or variables
not being defined.
Currently the compiler only applies defparam statements that are
found in the initial root module hierarchy. This patch ensures that
defparam statements within scopes created by generate constructs or
instance arrays are also applied.
This patch is based on one from "bruce <bruce1914@gmail.com>".
I've applied all but the elaboration code, which I rewrote to
properly work with the elaboration work queue. I also constrained
the implementation so that the parameter name must have exactly
two components: the root scope name and the parameter name. This
is necessary to keep the defparm processing sane. The comments
from bruce's original patch are as follows:
--
This patch would provide function to define parameter from command
line. This serves the same functionality as 'defparam' in Verilog
source code, but provide much more ease for using. Parameter
definition can be write in command file, with following syntax:
+parameter+<scope>.<parameter>=<val>
*Do not apply any space between them*
The scope name should be full hierachical name with root name at
the begining. The following example would override test.T1 with
new value 2'b01:
+parameter+test.T1=2'b01
'test' here is the root module name. The parameter value here
should be constant. Parameter definition can also be write in
the command line:
iverilog -Ptest.T1=2'b01
This serves the same functionality with the previous example.
If we define the same parameter in command file and command line,
the one in command line would over-write all others.
This patch cleans up some unneeded code. Releases some allocated
memory before the compiler quits and fixes a couple minor memory
leaks in the compiler and vvp code generator.
Icarus has recognized this directive, but it did not do anything
with the information. This patch adds the functionality for most
common cases. It adds this by changing the input net type from
wire/tri to tri1 or tri0 depending on the pull. The issue is that
if the input net is not a wire or tri this is not safe and should
really be done as an external pull gate connected to the input.
We will need to handle this is it ever comes up. For now a sorry
message is printed.
This patch add code to print a warning message if it finds both a
default and `timescale based delays. The -Wall or more specifically
the -Wtimescale flag can be used to find the module with the missing
`timescale directive.
When a PGAssign is driven by (r-value) a bit, part or indexed
select and the strength is not the default (supply). Then
we need to create a driver (BUFZ) to convey the strength
information.
This patch adds messages in various places to warn that constant
user functions are not supported. It uses a global variable to
indicate when we are in a constant context. This is a bit of a
kludge, but works well without needing to change a bunch of code.
It is interesting to note that ports are elaborated late enough
that if we had the constant function evaluation code they would
evaluate correctly. This also applies to the function return
range, the concatenation repeat, specparams and initial values.
Signal definitions are early enough that elaboration is what is
failing because the function body is not available (has not been
elaborated). The same thing applies to both parameters and
localparms.
Cary R
Martin Whitaker
Larry Doolittle
Stephen Williams