Currently, when a variable expression is passed to a system task,
the expression value is stored in thread memory. Values stored
in thread memory cannot safely be passed to $strobe or $monitor,
because the thread memory may get reused or deallocated before
the $strobe or $monitor task actually executes. As a temporary
measure, we just trap this case and terminate with a "sorry"
message. A proper fix would require the expression value to be
calculated at the time the $strobe or $monitor executes, not at
the time it is called.
This patch implements the $countdrivers system function. It does not
yet support wires connected to islands (and outputs a suitable "sorry"
message when this is detected).
In vvp, create the .var/str variable for representing strings, and
handle strings in the $display system task.
Add to vvp threads the concept of a stack of strings. This is going to
be how complex objects are to me handled in the future: forth-like
operation stacks. Also add the first two instructions to minimally get
strings to work.
In the parser, handle the variable declaration and make it available
to the ivl_target.h code generator. The vvp code generator can use this
information to generate the code for new vvp support.
The standard specifies that the size of a vecval should be calculated as
(size - 1)/32 + 1. When size is a PLI_INT32 this is needed to prevent an
overflow, but when the size is unsigned this can be simplified to
(size + 31)/32 since the size must fit into an integer, but we have an
extra significant bit in an unsigned so no overflow can happen.
This patch changes the code to use the correct version of the equation
depending on the context.
The previous patch does this in vvp/vpi_priv.cc
Not all the lex/yacc (flex/bison) targets were using a consistent syntax.
This patch fixes that and explicitly serializes the *.c/*.cc and *.h build.
Not doing this was causing problem when using make -j. The issue appears to
be that if two targets are specified for a rule (e.g. file.cc file.h: file.y)
make does not realize they are both built by the same call so the rule is
executed twice. Once for the .cc target and once for the .h target. This is
not a problem for a serial build. To work around this only use the .c/.cc
file in the main target and then make the .h file depend on the .c/.cc file
as a sub-target.
When scaling a time value we would often use the power operator to
create constants 10**-N that were then multiplied with the original
value. The problem with this is that there is some errors in the
representation of the fractional number. It is better to create a
integer value 10**N and then divide the original value by this
exact constant. You still have the calculation error, but the scale
value is now an exactly real value.
Add support for %m, suppression '*' and a maximum field width along with
a number of other fixes/enhancements. There is still no support for
%u, %v or %z.
Some of the last changes I added to the enumeration next()/prev() code
introduced a memory leak under some situations. This patch fixes the
leak by freeing the iterator before the new one is created.
Add an implementation for the enumeration name() method. This currently
only works if the context defines the return width (e.g. the result is
assigned to a variable). It does not work in a self-determined context
(e.g. as an argument to a system function or in a comparison). This is
a limitation in the compiler/code generator/run time not the method
implementation provided here. We may need full string support to make
this work 100%.
The standard defines how to calculate the name for an access function
or iterator if one is not given. It is supposed to be vpi followed by
the words in the name with each word capitalized. For the one to many
(iterator) interface from the enumeration typespec to the individual
constants this is vpiEnumConst not vpiMember.
Rework the actual next() and prev() methods to correctly process the
numeric count argument. Also rework the compiletf routine to give better
error messages and combine the call routine for the two methods.
Add a compiletf routine that checks the arguments and then report that
the name() method is not currently implemented.
The vpiDecStrVal case for the get_numeric() function needs to use the
existing string width as the minimum result size. -1 can be represented as
a signed value with a width of 1. This gives a display width of -1 which
is too small for the -1 string value. This was creating valgrind issues.
In general the string value should be the minimum so this is a safe change.
This patch updates the $scanf and $printtimescale routines to work with
two-state variables. It also updates the general is_numeric check to
recognize two-state variables as numeric.
Modify the $random code to allow the seed to be either an int, long or
bit that is 32 bits or longer. The 32 bit check is new and also applies
to reg/logic variables.
Technically the sized function is not currently needed by Icarus since
the SFT file handles this type of information, but lets define this so
that things work correctly if we ever switch to using the standard VPI
interface. Also mark this as a system defined function.
This patch removes the space between -L and the directory in the vpi
Makefile. It also fixes the line to use the correct variable name
for the LDFLAGS.
The $ivlh_attribute_event system function helps the Verilog runtime
support <name>'event expressions in VHDL. The vhdlpp generates a
call to $ivlh_attribute_event, which in turn uses callbacks to handle
the support.
This is also the start of the vhdl_sys vpi module. This module should
by included whenever VHDL code is parsed.
Icarus is not actually fast enough to run into this issue in a
reasonable amount of time. I discovered this by thinking about
the algorithm and verified the fix with custom code.
The code should be able to correctly parse any command string and
assign the appropriate values from the file to a structure that will
be used to add the information to the table structure.
snprintf() copies at most N characters, but the string may not be
terminated correctly. This patch uses sizeof() so that the snprintf()
call matches the size of the buffer and adds code to insert a NULL as
the last character of the string.
Added an explicit option prefix="yy" to files that were generated
without an explicit -P.
This makes the lex-generated symbol names self contained without any
help from from build system.
The const fixes for lxt_write.c were never pushed to GTKWave so
they were lost in a later sync with GTKWave. These changes have
now been pushed to GTKWave.
To get the correct definition for _FILE_OFFSET_SIZE we must include
the header that loads this before calling the other system headers.
This patch also fixes a minor spacing issues.
After some more thought I believe it is better for $q_full to return
'bx instead of 2 when $q_full is given an invalid id. This will make
the typical full/not full checks both return false. We still return
an error code in the status variable.
This patch adds preliminary support for implementing the $table_model()
function for Verilog-A. It is not currently functional, but the VPI
interface routines and data file parsing are mostly complete. The big
things left are building the data structures and adding the interpolation
and extrapolation routines.
We also need to fix vvp to identify constant strings/parameters in a
structural context.
This patch adds support for calculating the average queue wait
time. This is accomplished by keeping two 64 bit values that
represent the high and low total wait time for all previous
queue elements. The current wait time for any elements still
in the queue are added to this total. The wait time total is
then divided by the total number of items added to the queue.
This patch adds support for calculating the queue mean inter-arrival
time. This is just the latest add time minus the first add time
divided by the number of intervals (the number of adds minus one).
This patch adds full support for the stochastic tasks/functions except
the mean inter-arrival and average wait statistics are not currently
available. These will be added in a later patch. This implementation
goes a bit beyond the standard and supports the following:
1. The job and inform arguments support 32 bit four state values.
2. The id for all routines, the job and inform arguments for $q_add(),
the statistic code for $q_exam() along with the queue type and
maximum length arguments for $q_initialize() can be less than or
equal to 32 bits. The argument will be sign extended if needed to
fill the internal 32 bit value.
3. The job and inform arguments to $q_remove() and the status argument
for all the routines must be 32 bits, but do not have to be an
integer variable (e.g. a 32 bit register or part select is OK).
4. An undefined bit in the id argument for any of the routines will
return a status of 2 (undefined queue id). Undefined bits are not
automatically converted to zero.
5. Undefined bits in the $q_initialize() queue type and maximum
length arguments or the $q_exam() statistic code argument are also
flagged as an error (are not converted to zero).
6. The $q_full() function returns 2 on error, the other routines that
return a value $q_remove() job/inform arguments and the $q_exam()
statistic value argument will usually return x on error.
7. An invalid statistic code will set the $q_exam() status to 8.
8. The $q_exam() statistic value argument can be 32 bits or larger.
This allows returning large statistical time values.
9. All time values are internally saved in simulation time units.
They will be converted to the calling module's time unit (with
rounding) before they are returned.
10. If a $q_exam() statistical value is too large to fit into the
variable the maximum positive value will be returned and the
status code will be set to 9 (value is too large).
11. If a statistical value is currently undefined $q_exam() will
return 10 (no statistical information) (e.g. using code 5 on an
empty queue).
Create the v2009.vpi module to include SystemVerilog core
functions, and start out with some of the enum methods.
Add to vvp support for creating enum types, including some
vpi access methods.
The files we get from GTKWave are not under our control so we need to
ignore the cppcheck style warnings for them. The random routines are
from the standard so they should not be changed to fix style warnings
either. We also have some weird, but correct pointer subtraction that
cppcheck warns about. This patch adds suppression files for all these
warnings. You must have the latest cppcheck from git since I submitted
a patch that adds the ability to place comments in the suppression file.
In ivl_alloc.h we redefine malloc(), realloc() and calloc() to have
standard error checking. We don't want to do this for anything that
comes from the standard headers. This specifically doesn't work if
a C++ header files does std::malloc, etc.
Also change to -W instead of -Wextra since that is more portable. I
plan to add a check from -Wextra and use it when available since it
is more descriptive.
This patch adds -Wextra to the compilation flags for C++ files in
the vvp and vpi subdirectories. It also fixes all the problems
found while adding -Wextra. This mostly entailed removing some of
the unused arguments, removing the name for others and using the
correct number of initializers.
This patch adds support for running cppcheck from the Makefile. It also
standardizes the order of some of the targets. It renames vpip_format.c
to vpip_format.cc and fixes the size of the array tables to make room
for the trailing NULL. Found when using a C++ compiler.
Create the .var/2u and .var/2s variable records and give them
basic implementations. Make available to VPI the proper types
for the SystemVerilog types that these variables represent.
Follow-up to "Brainless start to const-correct changes"
Still actually does nothing, but now if the #define ICARUS_VPI_CONST
in vpi_user.h is changed to const, Icarus is almost const-correct,
as checked with gcc flags -Wcast-qual -Wwrite-strings.
Choosing when to #define ICARUS_VPI_CONST const is left as an
exercise for the reader.
With these two patches applied, and the const define, there are
still about a dozen const problems left.
Results of running
cd vpi
for f in *.c *.h; do sed -i \
-e "s/_calltf(PLI_BYTE8/_calltf(ICARUS_VPI_CONST PLI_BYTE8/" \
-e "s/_compiletf(PLI_BYTE8/_compiletf(ICARUS_VPI_CONST PLI_BYTE8/" $f; done
and a trivial patch to vpi_user.h to, among other things, make
ICARUS_VPI_CONST blank.
Thus, this patch does absolutely nothing. Will be followed by a
(much shorter) patch that makes it do something. :-)
Fix all the Icarus files that can be so that we do not have any
signed/unsigned compare warnings. It also removes const as a
return qualifier for two routines in discipline.h.
A real delay must be scaled and rounded using the local precision
before it is finally scaled to the simulation time units. This
patch fixes the compiler to do this correctly or generate the
correct code for run time calculated delays. Delays in a CA
already worked correctly. The run time was also fixed to scale
modpath (SDF back annotation) delays correctly.
The functions (malloc, free, etc.) that used to be provided in
malloc.h are now provided in cstdlib for C++ files and stdlib.h for
C files. Since we require a C99 compliant compiler it makes sense
that malloc.h is no longer needed.
This patch also modifies all the C++ files to use the <c...>
version of the standard C header files (e.g. <cstdlib> vs
<stdlib.h>). Some of the files used the C++ version and others did
not. There are still a few other header changes that could be done,
but this takes care of much of it.
gcc on OpenBSD reported shadow warnings for variables, arguments named
log, time and exp. This patch renanes those variables to logic, timerec
and expr.
This syncs fstapi.c to the latest from GTKWave CVS. This cleans up
most of the issues. I still have two to track down, but I think they
are cppcheck bugs not fstapi.c deficiencies.
The fstHandle is only a uint32_t so to avoid compiler warnings on 64
bit systems cast this to long before casting to a pointer.
Also reformat some of the code to match the rest of the Icarus code.
This patch documents that the lxt2/lx2 dumper supports -speed and
-space options. It adds -speed, -space, -space-speed and
-speed-space options for the fst dumper. Here are results for a
gate level back annotated design using the fst dumper.
<none> 12.88 seconds 3.5 Meg dump file.
-space 12.89 seconds 2.9 Meg dump file.
-speed 12.36 seconds 4.6 Meg dump file.
-<both> 12.84 seconds 3.2 Meg dump file.
We keep a scope list that is checked to verify that we do not try
to dump duplicate scopes or variables. Since the scan_item routine
can not add duplicate scopes we only need to sort the list after
the scan_item routine is called. Calling it every time a scope
was added was creating a significant startup delay for gate level
simulations since the sort routine is called for every scope in
the design (possibly thousands of times).
This mostly matches what was done for the LXT dumper except the
LXT dumper was incorrectly sorting before not after scan_item
was called. This would not catch a duplicate variable just
after a scope was added in a $dumpvars call.
The lxt2 routine was referencing the lxt not the lxt2 versions
of the space/speed flags. This also adds the lx2 version of the
flags. These were already supported in the sys_table.c file.
This patch is a slight modification to files Tony Bybell (the author of
GTKWave) send to me. We still have a few more changes we plan to make,
but this should be functional enough for initial testing. Multi-treading
and speed/size flags will be added shortly.
vpi_config.h defines _FILE_OFFSET_BITS. This must be defined before
any system includes files are processed, so vpi_config.h must be
called first. This patch puts vpi_config.h first. It also removes
direct calls for both vpi_config.h and vpi_user.h when sys_priv.h
is included since it already includes these two files.
It also updates the code to always include vpi_user.h using double
quotes.
Some new shadow issues have crept in. This patch fixes these new
issues and adds -Wshadow to the normal warning flags to keep any
new occurrences from happening.
Since the base lxt_write.c and lxt2_write.c files reference <config.h>
instead of "vpi_config.h" all their definitions need to be moved to
the main config.h include file.
This patch updates all the Makefile.in files and configure.in
as follows:
Do not use the -Wall warning flag when using the SunPro compiler.
The SunPro compiler uses -xMD instead of -MD.
There are still more fixes needed before Icarus will compile
on OpenSolaris.
This patch updates the lxt_write.h and lxt2_write.h header files
to the latest ones from GTKWave CVS. It also adds HAVE_INTTYPES_H
to the vpi_config.h.in header.
This patch fixes two places where Icarus under certain conditions
would try to free a NULL iterator value in $dumpvars(). $dumpvars()
can have a NULL argument to indicate that all variables should be
dumped. Under two error conditions the code was trying to free
this NULL argument reference.
The standard does not define if vpi_free_object() can support a
NULL reference. Icarus does not currently allow it (it asserts).
This patch remove the old VAMS $log function. It could create confusion
with the Verilog $log task. Recent versions of VAMS and 1364-2005 use
$log10 for the base 10 logarithm.
This patch cleans up some style issues: no need to check that a value
is defined before freeing or deleting it, use C++ style casts, make
sure to NULL terminate strncpy(), empty() is faster than size() for
size == 0 or size >= 0 checks, re-scope some variables, etc.
This patch adds support for iterating over the list of vpiUserSystf
tasks/functions that have vpiUserDefn set. The vpiUserDefn property
is true by default, but you can call vpip_make_systf_system_defined()
to set this property false (will hide the vpiUserSystf object). All
the normal system tasks/functions have been modified to call this
procedure to remove them from the list of vpiUserSystf objects. Only
user defined system tasks or functions should appear in the list.
vpi_compare_objects() is just a simple are the two pointers the
same. This works correctly for the vpiUserSystf objects, but the
other handle objects have not been checked.
The latest gcc with the latest Cygwin complains when passing a char to
the toupper, tolower, isspace, isalnum, isprint, isdigit or isalpha
functions/macros. These functions are defined to take an integer. This
patch adds cast to int as needed to remove the warnings. After this
there are still two warnings related to signed/unsigned comparison in
yy_get_next_buffer() (part of flex).
The SDF file format supports zero or more timing specs. Previously
the parser was one or more. Things like tie high/low cells do not
have any delay information so zero or more is needed and matches
the standard.
This patch adds support to $sdf_annotate to ignore RECREM constructs
in the SDF file. It also adds the ability to not specify all the
values in a rtriple (e.g. 1.1::1.6).
Move check of the value $fatal is called with from the compiletf to
the calltf routine, since the value may not be known at compiletf
time. If the value is invalid, it just prints a warning that $fatal
was called with a bad finish_number, and resets it to the default 1.
Changes the compile time check for a numeric argument to a warning.
Also, fixes bug where $fatal called without an argument causes problems.
Icarus does not support interconnect delays so INTERCONNECT is
currently ignored. The SDF parser does not currently support a
bit select as a port_instance. Since we are already ignoring
the INTERCONNECT I added support for bit selects there. This
is probably the most common place to find them.
The zero element was already returned so it can not be reused a
second time. This was crashing when things went off the end of
the list since the do all functor was off by one.
In a typical debug simulation run, a user tracing all the signals
in the simulation may wind up creating millions of these. Rework
the vcd_info structure to be more compact and possibly faster to
scan.
Rather then lock/unlock the work queue ring for every item, save
tons of pthread lock manipulation by allocating to the producer
in batches. Over the long run, this doesn't change the CPU balance
or hold up either thread, but it eliminates almost 3/4 of the
lock/unlock episodes.
The time change is usually a trivial operation, so instead carry
a timestamp on all the work items and let the work thread decide
on its own when to do a SET_TIME operation. This reduces some
pthread overhead and thus gets us some better performance.
The Cygwin compiler is a bit picky. This patch adds some casts
to remove compilation warnings. In the past I have had warnings
off because of problems with the STL, but for C directories
like this it makes sense to enable the warnings. It also does
not recognize that an assert(0) or assert(false) ends a routine
so it complains about no return at end of function or variables
not being defined.
These explicit dependencies are not normally needed (because they
are covered by automatic dependency generation) but when the "-jN"
flag is passed to gmake, they help gmake schedule parallel builds.
(cherry picked from commit 5479aaf721)
This patch updated the four file lxt_write.{c,h} and
lxt2_write.{c,h} to the latest ones from GTKWave. This
required adding the wavealloc.h include file and an
update to configure.in and vpi/vpi_config.h.in to add
checks/definitions for ALLOCA and FSEEKO.
Try to put all the version stamps into common version_base.h
and version_stamp.h header files. All the source programs then
get their version from these header files.
Also handle the version stamps in the man pages by using the
version_*.h header file contents to edit the version strings
in the man page title bar markers.
This patch removes bin32 from the clean targets since it is no
longer user/created. It adds autom4te.cache to the distclean
target in the main directory. It removes the files in driver
that are not created (lexor.c parse.c, etc.). The *.cc.output
files are no longer created so removing them is not needed.
- Add missing dependency of configure on aclocal.m4.
- Remove config stamp files in make distclean (and fix another for
loop in base make distclean that I missed)
- Add stamp files to .gitignore
Use the time stamp file technique recommended by the autoconf manual
to prevent unneccesary rebuilds because of an unchanged config.h.
Uses the automake trick of generating the stamp files in the
_AC_AM_CONFIG_HEADER_HOOK macro instead of littering the source
directory with stamp-h.in files.
Add an extra ./config.status run after ./config.status --recheck
because with --recheck it doesn't actually try to remake the generated
files (and thus doesn't make the timestamp files). Thus without the
extra run, each stamp-*-h target would need to independently run
./config.status to make sure it wasn't changed by the configuration
change.
An orthogonal fix of how config.status is called in subdirectories.
When in a subdirectory and config.status is called with
../config.status and $(srcdir) is a relative path, config.status gets
confused. Fixed by replacing '../config.status --file=Makefile.in'
with 'cd ..; ./config.status --file=<dir>/Makefile.in'
We do not want to check an array word scope to see if the scope
was already included since a scope does not include array words.
They must be explicitly specified.
This patch adds $ferror() support. This is enhanced over what the standard
says needs to be supported. All file I/O routines set/clear the errno flag,
This allows $ferror() to check when an invalid fd/MCD is passed to a
system task. The $ferror() fd is only checked if errno is not set since
all the other routines will set EBADF when they are called. This allows us
to test the output from $fopen() which sets the fd to zero (an invalid fd)
when it has a problem.
The following bugs (changes) are also fixed:
Fix $fdisplay*, $fwrite*, $fstrobe*, $fflush, $fclose to not accept 0 as
a valid MCD.
For the $fdisplay*, $fwrite* and $fstrobe tasks an invalid fd/MCD is now
a warning instead of an error like the other file I/O routines.
Modify $fputc() to be a function and return a value like $ungetc().
Modify $ungetc() to return a value like the standard dictates (-1 on
error else 0) and pass the value as a full int to get EOF as an error.
Remove some extra checks that could not happen in $fseek() and to
be safe convert the numeric codes to the system symbolic values.
Skip $fstrobe callback when the fd/MCD is closed. The standard says
we need to cancel the callback, but we currently do not have the
ability to do that so just skipping this will work for now.
Free the argument handle when $fscanf() is called with an invalid fd
(memory leak).
Very minor issues dosify was not closing files so memory leaks could
show up and vpi/sys_readmem.c was passing the file after it was
closed to the lexor cleanup code. The lexor cleanup code does not
need an argument.
The LXT2 writer allows for splitting the output file into multiple
output files. The size of that output file was fixed, but needs to
be controlled by an environment variable.
Make the code smarter so it can keep fewer items in the lists.
Scopes and explicitly given variables are all that is kept.
Includes a few other refinements.
This patch adds support for dumping named events to the VCD
dumper only. The LXT and LXT2 will be added once this has
been tested more. It also reworks the $dumpvars routine
to be more consistent concerning warning messages for duplicate
signal dump requests and fixes some bugs.
For events you will get extra events at T0 and at $dumpon. I
plan to fix this, but that is much more involved.
For duplicate signal warnings. Implicit duplicates loaded
automatically from a scope will not display a warning. Only
an explicit signal request will print a warning if it was
already included. All other will be silently ignored. This
should limit the warning to only what the user cares about.
For example:
$dumpvars(0, var, scope_that_includes_var);
Will work without a warning message.
$dumpvars(0, scope_that_includes_var, var);
Will generate a warning since the var was already included
by the scope request.
Other enhancements include the start of including type
information in the output. For now integer is added, the
other type information will require changes to the code
generator and hence will only be done in development.
This patch removes some of the unneeded differences in the
various dumper routines. This is the start of a complete
refactoring, but the first task is to make them as common
as possible and this is the start of that.
This patch changes the initial buffer size when displaying results
to 512 from 256. This initial buffer is used as the default for the
floating point results and failed when %f is given a large, but
valid value. To make this even more safe we add the precision to
the size to make sure we do not overflow the buffer.
When dumping an array word the name is implicitly converted to
an escaped identifier. If this implicit name conflicts with an
explicitly created escaped identifier this patch will print a
warning message warning that the array word will conflict with
an escaped identifier.
Dumping array words is an enhancement that we have added to Icarus.
The problem was that if you wanted to dump the whole array you would
like to use a for loop as follows:
for (lp = 0; lp < max ; lp = lp + 1) $dumpvars(0, array[lp]);
This used to work, but some of the VPI rework broke it because it
counted on the word select to be constant. This patch restores the
functionality by converting the variable word select into a constant
word select in the calltf routine. This is done without warning and
only for the $dumpvars() routine.
Adding this functionality necessitated adding support for vpiIndex
to the &A<> routines.
This patch adds better error messages (compiletf) for the optional
system tasks and functions (Annex C 1364-2005). Doing this also
makes calling them fail more gracefully (it is no longer a RE).
This patch add a new system function $readmempath. It accepts
a ":" separated list of directories that $readmem{b,h} will
use when trying to open a given file. If the file given to
$readmem{b,h} starts with a '/' (an absolute path) the search
list will not be used. A new call to $readmempath will replace
the previous search list with the given list. The search list
elements are check to see if they exist and are directories.
If not a warning will be displayed and they will not be added
to the list.
When the VAMS math functions were originally built we did a
straight copy of the log() function to $log(). This can
conflict with other Verilog-D definitions of $log. We
need to deprecate this function and remove it before the
next major release.
This patch adds the $fread() system function. Icarus does not
currently allow missing arguments in functions so the following
standard specified functionality is not supported:
res = $fread(mem, fd,,count);
It also fixes a memory leak in fopen related to the get_filename
refactoring I recently did.
(cherry picked from commit 036c176e8b)
This patch adds compiletf routines for the $sscanf/$fscanf
functions. It does not enhance the conversion routines it
only adds better error/warning messages.
It also removed the redundant IS_MCD in some of the fileio
calltf routines. This is already checked in vpi_get_file().
I also added the vpiNetArray type to allow us to distinguish
arrays of nets from other arrays (memories). Much more is
needed here, but this solved the problem of the day. The
problem was that we needed to make sure we could assign to
the word of a variable array, but not the word of a net array.
It's actually probably not needed since Icarus converts the
net array word reference to just the net, but I thought it
prudent to make sure things didn't slip by.
This patch adds compiletf routines for the mti random functions
and adds a common routine to check for extra arguments. It also
adds file and line information to the rest of the compiletf
routines that were missing them.
This patch adds compilef routines for the readmemb/h and
writememb/h system tasks. It also fixes some errors related
to arrays with negative range values. You can not specify a
negative address in the file, but arrays with negative range
values or negative start/finish argument to the tasks are
supported. It also generates an error when reading invalid
character from the input file.
A significant amount of the code is common between the two
styles of tasks so this has been grouped into common
routines.
It also adds a common routine for getting a string that will
be used as a file name. This routine is used by any task
that requires a file name value. If a filename has a
non-printable character it will be displayed as a \octal
constant to show what the character is.
Updates the dumping routines to match each other better,
improves some error messages and fixes a bug in the LXT2
dumper when dumping greater than 32 bit delays.
This patch adds support for the other edges 01, 10, etc. These still
need to be verified in the context of IOPATHs, but they are ignored
in the timing checks and that's what was needed.
This patch updates the compiletf for $sdf_annotate() to better
check the arguments and to display the file and line location
when an error/warning does occur. It does the same for the
calltf messages. It also fixes a couple of subtle bugs.
First we need to look for a NULL string not a NULL value. The
result buffer should always be defined so will never be NULL.
Next if a scope has no modules we should return like the module
was not found (return 0) vs asserting.
The newer mkinstalldirs can handle paths that have spaces in them.
While I'm at it, I also updated the Makefiles so that installation
can also work to DESTDIR directories that have spaces.
When cleaning up the &A<> and &PV<> we need to check if the handle
argument is a nested call to another &A<> or &PV<> if it is then
we need to also delete that construct.
We also need to cleanup the vcd_info information list.
elaborate.cc:2456: warning: suggest parentheses around comparison in operand of &
vpi/vcd_priv.c:210: warning: operation on 'idx' may be undefined
Probable behavior change. Passes testsuite.
This patch cleans up the V-2005 and V-analog math functions to
free their allocated memory at the end of simulation. It also
modifies the veriusertfs code to do the same thing.
It also closes the VCD file at EOS.
This patch fixes some issues in the previous patch. Specifically
I need to use vpi_mcd_printf and some trickery was needed to
prevent the compiler from complaining about the format string.
This completes the transition to the new string based formatting.
All the tasks now use the string formatting routines. Better
compile time checking and better messages were also added.
Also a couple of types were added to vpi_get_str(vpiType, ...)
and the calculation for vpiConstantSelect was fixed for both
the &A<> and &PV<> constructs. If the value is a plain variable
or if it is calculated in thread space we assume it is not a
constant. This may not be true because of limitations/bugs in
the compiler (constant user functions are one known problem).
This patch modifies $strobe and $fstrobe to use the string
formatting routines. It also combines the $display/$write
and $fdisplay/$fwrite routines into one and removes the
old routines that are no longer needed.
This patch fixes a bunch of memory leaks in vvp and converts the
T_STRING lexical token to be new based. There are still two
known leaks that I need to find a way to fix and likely some
unknown leaks that still need to be found and fixed.
This patch makes the $fdisplay() and $fwrite() family of task
use the string formatting code. It also adds a compiletf routine
for the tasks and a run time check that the FD or MCD is correct.
If not it fails instead of just dropping the output.
It also cleans up a couple of memory leaks and adds no argument
compiletf routines for the $monitoron/$monitoroff tasks.
This patch fixes some technically benign problems found by valgrind,
but we may as well give the values a default to make sure things
work correctly. I believe that the default I choose is the
appropriate value for the context.
The other problem is that real valued (local)parameters should be
printed as a real value like a real variable, etc. Trying to
do this as a decimal with the string formatting was causing a
memory problem. I could have fixed the routine to handle this,
but the better solution was to just display things the right way.
This patch does a number of things.
It adds file and line number information to the strobe_cb_info
structure. This allows the $swrite and $sformat calls to reference
their location in warning/error messages.
Their compiletf and calltf routines also display file and line
number information in messages.
The $display routine was converted to use the string formatting
routine. This can be reverted by defining USE_OLD_DISPLAY. The
old code will be removed once there has been more testing.
A number of bugs were fixed that were discovered with the
$display code.
The output of some conversions, variables and system functions
were changed to match the original display code or to better
match expectation.
Leading zero support was added to the %b/%b, %o/%O, %h/%H, %x/%X,
%c/%C and %d/%D. The floating point conversions already supported
adding a leading zero.
This is the start of converting all the various display tasks to use
the string formatting code and a cleanup/update of the sys_display.c
file in general.
Rather then spread VERSION= defines throughout all the makefiles, put
the base version in version_base.in. Use that to generate a version.h
that includes the base version as well as the detailed version.
This reverts commit 31d67fcd3e.
The concensus has been that this causes too many build problems in
the general case and what is needed instead is a way to turn on the
extra warnings for developers only.
The code base is almost shadow-free now, so this won't add much noise to the compiles.
Problems I know about:
lxt{,2}_write.c: patch sent upstream
cflexor.c: exposes gray area of name space boundary
Continue cleaning up shadowed variables, flagged by turning on -Wshadow.
No intended change in functionality. Patch looks right, and is tested
to compile and run on my machine. No regressions in test suite.
This patch set covers C code, with the notable exception of
vpi/lxt_write{,2}.c.
This patch cleans up the Makefile.in files.
We only need to delete config.log in the lower directories.
We reference the *.in files at $(srcdir)/
We need to make distclean for the tgt-(fpga,pal,verilog) directories.
This is to cleanup the Makefile.
Add some missing "rm -r f dep"
Collapse all the configure checks to a single configure script in
the root of the source tree. This makes the configure process run
a lot faster, expecially on Windows systems that are slower in general.
It is recommended that AC_CYGWIN not be used and under MinGW
the previous test was complaining about multiple calls to
AC_CANONICAL_HOST. The new test performs the same function
and also displays the MinGW status if we are compiling on
windows.
Also removed a AX_CCP_IDENT call in the vpi directory and
tgt-null is built by the top configure so there is no need
to try to run configure in that directory.
Remove the #ident and $Log$ strings from all the header files and
almost all of the C/C++ source files. I think it is better to get
this done all at once, then to wait for each of the files to be
touched and edited in unrelated patches.
This configure option causes the installed commands to have
a suffix string that makes them distinct from other versions
that also have a suffix string. This allows for multiple
installed versions of Icarus Verilog.
Also, move installed C/C++ header files into a subdirectory of
their own under the target include directory, to make clearer
the purpose and source of those files.
Cary R
Martin Whitaker
Stephen Williams
Arun Persaud
Larry Doolittle
Greg Steuck
Jared Casper
Purdea Andrei
Michael Strelnikov