Check that the compiler reports an error for `posedge`, `negedge` and `edge`
event controls on named events. Edge controls can not be used with named
events.
There is already an existing test that checks both `posedge` and `negedge`.
Split it into separate tests so that each invalid event control is checked
independently.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Implicit named port connections are only supported by SystemVerilog. Add a
check to generate an error when trying to use it in Verilog mode.
Regression test br_gh315 is modified to run in SystemVerilog mode since it
makes use of implicit named port connections.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
This adds the "normal-vlog95" test type, because we need to run a different
set of commands for this to work so a new test type makes sense. This also
moves a few of the existing tests to the new format in order to test the
new test rig.
Check that null-bytes get removed when reading a value through the VPI API
as a vpiStringVal. Also check that null-bytes are not removed from string
literals when string literals are read through the VPI API as a non
vpiStringVal.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
It was common practice in the past to just declare a port direction
and declare it as a vector in a subsequent type declaration. Versions
of the standard up to and including 1364-2005 include an example that
does this (e.g. 1364-2005 section 12.3.7). Users may have old or
third-party code that they can't or don't want to modify, so allow
the warning to be suppressed by including it in the anachronisms
category.
Check that an error is reported when either calling a task or a void
function as part of an expression.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Check that $signed/$unsigned works when being combinatorially assigned with a
delay and the target of the function is a net without any drivers.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
macro_start_args truncates def_buf, but does not check to ensure that
someone has allocated def_buf first. This will cause a null pointer
dereference if the first access to def_buf while parsing a file is a
macro invocation. Fix this by avoiding truncating def_buf if it is NULL,
as it is effectively already truncated.
Fixes: 680196953 ("Add support for text macros with arguments.")
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Check that all kinds of invalid repeated task port declarations are
detected as errors. They should not crash the application nor should they
result in successful elaboration.
The tests are created for corner cases that previously resulted in
incorrect behavior.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Check that all kinds of invalid module port declarations, where the
declaration conflicts with previous declarations, are detected as errors.
They should not crash the application nor should they result in successful
elaboration.
The tests are created for corner cases that previously resulted in
incorrect behavior.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Check that when port direction and data type are declared separately that
an error is reported if the port direction has an explicit range
specification, but the data type has not. This should even be the case if
the data type has an implicit range, e.g `int` or a struct type.
For vector types also check that it is an error if the ranges are not
identical.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Check that when port direction and data type are declared separately that
an error is reported if the port direction has an explicit range
specification, but the data type has not. This should even be the case if
the data type has an implicit range, e.g `int` or a struct type.
For vector types also check that it is an error if the ranges are not
identical.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
There are some tests that use non-ANSI style task port declarations where
the port direction has no packed range specification, but the corresponding
signal declaration has as range specification.
This is not valid, the standard requires the range specification for both
to match.
These tests are currently passing because this error is not detected if the
port direction declaration is scalar.
In preparation for eventually detecting this error set the
`no-io-range-error` flag for these tests. When this flag is set the error
is downgraded to a warning.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
The br_ml20150606 regression test uses ANSI style port declarations, but
also re-declares the ports inside module as signals.
This is not valid (System)Verilog, even though the data type in the port
declaration is an implicit type. An ANSI-style port is always fully
defined. This defined section 23.2.2.2 ("ANSI style list of port
declarations") of the SystemVerilog LRM (1800-2017) and section 12.3.4
("List of ports declarations") of the Verilog LRM (1364-2005).
The test was originally added in response to a similarly non-compliant test
in the Yosys test suite, but that test has subsequently been updated to
conform to the standard[2].
Remove the non-compliant test in preparation for adding strict standard
compliance checking on ANSI port redeclarations.
[1] https://sourceforge.net/p/iverilog/mailman/message/34182256/
[2] https://github.com/YosysHQ/yosys/issues/1570
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Check that default values are support for module port lists.
* For output ports it is supported in both Verilog and SystemVerilog.
* For input ports it is only supported in SystemVerilog.
* For inout ports it is never supported
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Add regression tests for the following types partial writes for both
2-state and 4-state vectors.
* Non-blocking
* Blocking
* Blocking event control
Check that all in-bounds partial writes, partial out-of-bounds and
full out-of-bounds all works as expected.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Check that multiple events can be used in a non-blocking event control
assignment. The assignment should happen if either of the events trigger.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Check that a non-blocking event control assignment works as expected to a
lvalue concatenation. All values that are part of the concatenation should
only be assigned after the event triggers.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Check that for the following operations the load or store is not skipped
after a operation that sets vvp flag 4.
* Assignment to immediate indexed real array entry
* Assignment operator on immediate indexed vector array entry
* Assignment operator on dynamic vector part select
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Writing parameters into VCD files makes the values available to waveform
tools. This can be done easily enough by writing out a $dumpadd section
at the beginning of the file that sets the parameter values. We don't need
to track the values over change, because by definition they do not change.
This changes the typical vcd output as well, so a few of the regression tests
need to be adjusted to account for this.
Also, while tracking this down, found and fixed the vvp/README.txt documention
for the .param/x records.
Check that scalar typed parameters are handled correctly. Make sure the
width of the parameter only depends on the type and not on the value
assigned to the parameter.
Same for parameters with a 1-bit range specification.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Check that constant recursive functions are supported. Check both Verilog
style using assignments to the implicit function return signal and
SystemVerilog style using `return`.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Add a regression test that checks that recursive functions using a `return`
statement work correctly.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Lars-Peter Clausen
Martin Whitaker
Cary R
Stephen Williams
Sean Anderson