This patch adds support for tracing procedural statement execution in vvp.
This is accomplished by adding a new opcode that is inserted before the
code that represents a procedural statement. These opcodes also trigger
a message whenever time advances. By default these opcodes are not added.
To add them, pass the -pfileline=1 flag to the compiler. In the future we
may add support for turning the debug output on and off once the opcodes
have been added with a system task or from the interactive prompt.
Currently the vvp target emits multiple single bit %mov instructions
to perform sign extension. This patch adds a new %pad instruction
that allows sign extension to be performed with just one instruction.
This patch changes all the iterator code to use a prefix ++ instead
of postfix since it is more efficient (no need for a temporary). It
is likely that the compiler could optimize this away, but lets make
it efficient from the start.
This patch adds -Wextra to the compilation flags for C++ files in
the vvp and vpi subdirectories. It also fixes all the problems
found while adding -Wextra. This mostly entailed removing some of
the unused arguments, removing the name for others and using the
correct number of initializers.
The functions (malloc, free, etc.) that used to be provided in
malloc.h are now provided in cstdlib for C++ files and stdlib.h for
C files. Since we require a C99 compliant compiler it makes sense
that malloc.h is no longer needed.
This patch also modifies all the C++ files to use the <c...>
version of the standard C header files (e.g. <cstdlib> vs
<stdlib.h>). Some of the files used the C++ version and others did
not. There are still a few other header changes that could be done,
but this takes care of much of it.
Tran islands must do their calculations using the forced values,
if any. But the output from a port must also be subject to force
filtering. It's a little ugly, but hopefully won't hurt the more
normal case.
The vpi_get_value() function should not crash when called during
the compiletf phase. This patch fixes this by returning 'bx for
any vectors in thread space. It also fixes some other minor things
that my test code uncovered. Most of the other objects work as
expected.
The scope thread rework broek --with-valgrind builds due to the
different handling of the list of threads. Rework valgrind enabled
handling of the thread set within a scope.
The scope contains the threads running within. The rework of this
patch allows all threads to know their scope, and cleans up the
handling of threads listed in the scope.
In combination with the patch to make all operations on thread words
operate on 64-bit values, this patch ensures casts between real values
and large vector values work correctly.
The vvp thread word storage had previously been changed to always store
64-bit values, but some instructions still only operate on native long
values. This patch ensures all instructions that modify thread words
support 64-bit values.
The fix for pr1830834 causes vvp to only delete a completed thread
when the simulation time next advances. If a procedural model is
being simulated which makes many task or function calls within a
single time step, this can lead to excessive memory use. This patch
modifies the behaviour so that thread deletion is only delayed if
that thread has caused a sync event to be placed in the event queue.
This should catch all cases where the thread private data can be
accessed after a thread has terminated.
For the %mov instruction, implement a vvp_vector4_t::mov method to
manipulate the thread vector directly.
For the %load/v instruction, rework the vec4_value() methods to
avoid creating vvp_vector4_t temporaries, and therefore reduce the
copy overhead.
Whether and what to propagate after a release of a part needs to
match the behavior of the full-vector release. Nets need to restore
their driver, and regs need to hold their forced value.
When releasing a net, the release needs to propagate the driven
value. When releasing a variable, the driven value must be set
to the previously forced value.
These opcodes need to return 'bx or 0.0 for the real opcode when
the array index is undefined.
The patch also documents the auto incrementing of the bit
index register done by the %load/avx.p opcode.
The %shiftr/i0 and %shiftl/i0 opcodes are used for some part
selects and if we have a negative shift we want the value to be
padded with 'bx. This patch enhances the two %shift/i0 opcodes
to work with negative shifts and for negative shifts pad with
'bx instead of 'b0.
It also fixes %ix/get/s to use a uint64_t instead of a unsigned
long to avoid problems with sign extension on 32 bit machines.
Two small fixes: Threads should load signal values from signal_value
objects, not signal functors, and the force method should not run
its value through the filter.
Take wires out of the signals/variables and move them into a filter
instead. This is a big shift, and finally starts us on the path to
divide wires out of signals.
We want the entire force/release subsystem to only reference the
vvp_net_t or vvp_net_fil_t objects in a net. This gives us the
latitude to take wire implementations out of the vvp_net_fun classes.
The vvp_fun_force node converts its input to a call to the
force method of the target node. This eliminates the need for
linking a net to a force input of a signal.
The vvp_net_t port 2 was used to implement force behavior, but that
is no longer how we plan to implement force, so remove it from the
implementation of signal nodes. This currently breaks much of the
force/release functionality, but we'll get it back by other means.
This patch fixes the three %assign/v0/x1 operators to correctly
notice that the select has fallen off the start of the vector
for the case that the negative offset equaled the width.
There is no use implementing the release and deassign methods as
port commands. It's confusing and a waste of vvp_net_t functionality.
It also obscures what needs to be done to more force/release into
the filter object.
the vvp_net.h header file is getting pretty huge. This divides
the obviously separable signal functor code out into its own
header and source files.
Also, fill out the use of the filter member of the vvp_net_t
object. Test the output of the vvp_net_t against the filter.
The out pointer of a vvp_net_t object is going to be a bit more
sophisticated when we redo the handling of net signals. Take a step
towards this rework by making the pointer private and implementing
methods needed to access it.
The Multiword division was not handling some degenerate high
guesses for the intermediate division result guess. The end result
was an assertion. Recover from this case.
(Does the addinb back of bp need to be optimized better?)
This patch adds support for 64 bit non-blocking delays in procedural
code. We fixed the procedural delay operator (blocking delays) earlier.
This patch mostly mimics what was done there. The continuous assignment
delay operator still needs to be fixed.
This patch adds code to free most of the memory when vvp
finishes. It also adds valgrind hooks to manage the various
memory pools. The functionality is enabled by passing
--with-valgrind to configure. It requires that the
valgrind/memcheck.h header from a recent version of
valgrind be available. It check for the existence of this
file, but not that it is new enough (version 3.1.3 is known
to not work and version 3.4.0 is known to work).
You can still use valgrind when this option is not given,
but you will have memory that is not released and the
memory pools show as a single block.
With this vvp is 100% clean for many of the tests in the
test suite. There are still a few things that need to be
cleaned up, but it should be much easier to find any real
leaks now.
Enabling this causes a negligible increase in run time and
memory. The memory could be a problem for very large
simulations. The increase in run time is only noticeable on
very short simulations where it should not matter.
This patch adds the procedural power function %pow/s for signed
values. This has bit based inputs and outputs, but uses the double
pow() function to calculate the value.
The VVP %join function was incorrectly treating the return from a
non-automatic function as a return from an automatic function in
the case that the non-automatic function result was being used as
a parameter to an automatic function. This patch fixes this error.
This patch fixes a number of problems related to the divide and
modulus operators.
The net version (CA) of modulus did not support a signed version.
Division or modulus of a value wider than the machine word did
not correctly check for division by zero and return 'bx.
Fixed a problem in procedural modulus. The sign of the result is
only dependent on the L-value.
Division or modulus of a signed value that was the same width as
the machine word was creating an incorrect sign mask.
Division of a signed value that would fit into a single machine
word was not checking for division by zero.
Division or modulus of a wide value was always being done as
unsigned.
Added a negative operator for vvp_vector2_t. This made
implementing the signed wide division and modulus easier.
Support arrays of realtime variable arrays and net arrays. This
involved a simple fix to the ivl core parser, proper support in
the code generator, and rework the runtime support in vvp.
This patch splits any VVP net functor that needs to access both
statically and automatically allocated state into two sub-classes,
one for handling operations on statically allocated state, the
other for handling operations on automatically allocated state.
This undoes the increase in run-time memory use introduced when
automatic task/function support was first introduced.
This patch also fixes various issues with event handling in automatic
scopes. Event expressions in automatic scopes may now reference either
statically or automatically allocated variables or arrays, or part
selects or word selects thereof. More complex expressions (e.g.
containing arithmetic or logical operators, function calls, etc.) are
not currently supported.
This patch introduces some error checking for language constructs
that may not reference automatically allocated variables. Further
error checking will follow in a subsequent patch.
Start cleaning up shadowed variables, flagged by turning on -Wshadow.
No intended change in functionality. Patch looks right, and is tested
to compile and run on my machine. YMMV.
This patch adds non-blocking event control for array words.
It also fixes a problem where the word used to put the
calculated delay for a non-blocking array assignment was
not being released. It also fixes the non-blocking array
assignments to correctly handle off the end/beginning part
selects.
Since some event control assignments can be skipped we need an
event control clear so that future %evctl statements do not fail
their assert. This patch adds %evctl/c and uses it in the compiler
as appropriate to keep the event control information in sync.
This patch adds full event control for vectors and parts of a
vector. It also fixes the other non-blocking part select code
to correctly handle a negative offset ([1:-2] of a [4:0] will
have an offset of -2).
This patch pushes the non-blocking event control information to
the code generator. It adds the %evctl statements that are used
to put the event control information into the special thread
event control registers. The signed version (%evctl/s) required
the implementation of %ix/getv/s to load a signed value into
an index register. It then adds %assign/wr/e event control based
non-blocking assignment for real values. It also fixes the other
non-blocking real assignments to use Transport instead of inertial
delays.
Nothing to do with tab width! Eliminates useless
trailing spaces and tabs, and nearly all <space><tab>
pairings. No change to derived files (e.g., .vvp),
non-master files (e.g., lxt2_write.c) or the new tgt-vhdl
directory.
Low priority, simple entropy reduction. Please apply
unless it deletes some steganographic content you want
to keep.
This patch causes a thread that is created to evaluate a function
to be executed immediately. The parent thread is resumed when the
function thread terminates.
Logical (in)equality needs to look at all the bits of both operands,
and cannot short circuit the test unless defined bits differ. If there
are undefined bits, the equality is undefined at that point, but return
x only if there are not other bits that make the results clearly
unequal.
This patch updates the %cvt/vr command to use the new double to vector
constructor. This allows the resulting bit pattern to be larger than
a long. The old method was producing incorrect results without a
warning for large bit values.
The schedule_assign_plucked_vector is a better way to implement the
schedule_assign_vector, or at least no worse, so remove the now
redundent schedule_assign_vector.
It is legal (though worthy of a warning, I think) for the part select
of an l-value to me out of bounds, so replace the error message with
a warning, and generate the appropriate code. In the process, clean
up some of the code for signal l-values to divide out the various kinds
of processing that can be done. This cleans things up a bit.
The load-and-add for vectors %load/vp0/s can be combined with the
load-and-add for array words, and the %load/avp0/s added to round
out the combinations. This can make for fewer instructions when
words are padded in arithmetic expressions.
The %load/vp0 instruction adds a signed value to the signal value being
loaded, but it doesn't allow for a signed source vector. Add the
%load/vp0/s instruction that pads the loaded vector, and add the code
generator details to properly use it.
The vvp_net_t objects are never deleted, so overload the new operator
to do a more space efficient permanent allocation.
The %assign/v instruction copied the vvp_vector4_t object needlessly
on its way to the scheduler. Eliminate that duplication.(cherry picked from commit d0f303463d)
The %load/v instruction was doing some spurious resizes of the vector
that comes from the signal. Eliminate those resizes that can be
removed, and optimize some that remain.
The multiply runs does not need to do all the combinations of digit
products, because the higher ones cannot add into the result. Fix the
iteration to limit the scan.
Clarify that operands are typically 32bits, and have the code generator
make better use of this.
Also improve the %movi implementation to work well with marger vectors.
Add the %andi instruction to use immediate operands.
Use high radix long division to take advantage of the divide hardware
of the host computer. It looks brute force at first glance, but since
it is using the optimized arithmetic of the host processor, it is much
faster then implementing "fast" algorithms the hard way.
This instruction adds an integer value to the value being loaded. This
optimization uses subarrays instead of the += operator. This is faster
because the value is best loaded into the vector as a subarray anyhow.
When processing wide vectors of these operations, it pays to process
them as vectors. This improves run-time performance. Have the run time
select vectorized or not based on the vector width.
Improve vvp_vector4_t methods copy_bits and the part selecting constructor
to make better use of vector words. Eliminate bit-by-bit processing by
these methods to take advantage of host processor words.
Improve vthread_bits_to_vector to use these improved methods and Update
the %load/av and %set/v instructions to take advantage of these changes.
These instructions can take advantage of the much optimized
vector_to_array function to do their arithmetic work quickly and
punt on X very quickly if needed. This helps some benchmarks.
The abs() function needs to be able to turn -0.0 into 0.0. This proved
to be too clunky (and perhaps impossible) to do with tests and jumps,
so add an %abs/wr opcode to do it using fabs().
The min/max functions need to take special care with the handling
of NaN operands. These matter, so generate the extra code to handle
them.
Larry Doolittle
Cary R
Martin Whitaker
Stephen Williams
Martin Whitaker
Martin Whitaker
Stephen Williams