# Test input drive, driving cell, input slew, PVT, operating conditions, # analysis type, and their write_sdc paths. # Targets: # InputDrive.cc: setSlew, setDriveResistance, driveResistance, # hasDriveResistance, driveResistanceMinMaxEqual, # setDriveCell, driveCell, hasDriveCell, driveCellsEqual, # slew, InputDriveCell methods (equal, setLibrary, setCell, # setFromPort, setToPort, setFromSlews) # Sdc.cc: setInputSlew, setDriveResistance, setDriveCell, # setOperatingConditions, setAnalysisType, setPvt, # findInputDrive, operatingConditions # WriteSdc.cc: writeDriveResistances, writeDrivingCells, # writeDrivingCell, writeInputTransitions, # writeOperatingConditions, writeVariables # Sdc.i: set_analysis_type_cmd, set_operating_conditions_cmd, # set_instance_pvt, operating_condition_analysis_type, # set_drive_cell_cmd, set_drive_resistance_cmd, # set_input_slew_cmd source ../../test/helpers.tcl read_liberty ../../test/nangate45/Nangate45_typ.lib read_verilog sdc_test2.v link_design sdc_test2 create_clock -name clk1 -period 10 [get_ports clk1] create_clock -name clk2 -period 20 [get_ports clk2] set_input_delay -clock clk1 2.0 [get_ports in1] set_input_delay -clock clk1 2.0 [get_ports in2] set_input_delay -clock clk2 2.0 [get_ports in3] set_output_delay -clock clk1 3.0 [get_ports out1] set_output_delay -clock clk2 3.0 [get_ports out2] # Input transition / slew set_input_transition 0.15 [get_ports in1] set_input_transition -rise -max 0.12 [get_ports in2] set_input_transition -fall -min 0.08 [get_ports in2] set_input_transition -rise 0.10 [get_ports in3] set_input_transition -fall 0.11 [get_ports in3] set_input_transition -rise -min 0.06 [get_ports in1] set_input_transition -fall -max 0.18 [get_ports in1] report_checks # Drive resistance set_drive 100 [get_ports in1] set_drive -rise 120 [get_ports in2] set_drive -fall 130 [get_ports in2] set_drive -rise -min 80 [get_ports in3] set_drive -rise -max 100 [get_ports in3] set_drive -fall -min 90 [get_ports in3] set_drive -fall -max 110 [get_ports in3] report_checks # Driving cells - basic set_driving_cell -lib_cell BUF_X1 [get_ports in1] set_driving_cell -lib_cell INV_X1 -pin ZN [get_ports in2] # Driving cell with -from_pin set_driving_cell -lib_cell AND2_X1 -from_pin A1 -pin ZN [get_ports in3] # Driving cell with input transition slews set_driving_cell -lib_cell BUF_X4 -pin Z \ -input_transition_rise 0.05 -input_transition_fall 0.06 \ [get_ports in1] # Driving cell with -library set_driving_cell -library NangateOpenCellLibrary -lib_cell INV_X2 -pin ZN \ [get_ports in2] # Driving cell with rise/fall set_driving_cell -lib_cell BUF_X2 -pin Z -rise [get_ports in3] set_driving_cell -lib_cell BUF_X8 -pin Z -fall [get_ports in3] # Driving cell with min/max set_driving_cell -lib_cell INV_X4 -pin ZN -min [get_ports in1] set_driving_cell -lib_cell INV_X8 -pin ZN -max [get_ports in1] report_checks # Write SDC - exercises writing drive resistance and driving cell set sdc1 [make_result_file sdc_drive_input1.sdc] write_sdc -no_timestamp $sdc1 set sdc2 [make_result_file sdc_drive_input2.sdc] write_sdc -no_timestamp -compatible $sdc2 # Operating conditions set_operating_conditions typical report_checks # Analysis type sta::set_analysis_type_cmd single sta::set_analysis_type_cmd bc_wc sta::set_analysis_type_cmd on_chip_variation # Reset to single sta::set_analysis_type_cmd single # Analysis type through set_operating_conditions set_operating_conditions -analysis_type bc_wc set_operating_conditions -analysis_type single # PVT settings on instances set_pvt [get_cells buf1] -process 1.0 -voltage 1.1 -temperature 25.0 set_pvt [get_cells inv1] -process 0.9 -voltage 1.0 -temperature 85.0 # Wire load model and mode set_wire_load_model -name "5K_hvratio_1_1" set_wire_load_mode enclosed set_wire_load_mode top set_wire_load_mode segmented # Propagate all clocks variable sta::set_propagate_all_clocks 1 # Write after all environment settings set sdc3 [make_result_file sdc_drive_input3.sdc] write_sdc -no_timestamp $sdc3 # Write with digits set sdc4 [make_result_file sdc_drive_input4.sdc] write_sdc -no_timestamp -digits 6 $sdc4