0100 CmdArgs.tcl:108 unsupported object type $object_type. 0101 CmdArgs.tcl:165 object '$obj' not found. 0102 CmdArgs.tcl:413 $corner_arg is not the name of process corner. 0103 CmdArgs.tcl:419 -corner keyword required with multi-corner analysis. 0104 CmdArgs.tcl:433 $corner_name is not the name of process corner. 0105 CmdArgs.tcl:438 missing -corner arg. 0106 CmdArgs.tcl:449 $corner_name is not the name of process corner. 0107 CmdArgs.tcl:466 $corner_name is not the name of process corner. 0108 CmdArgs.tcl:501 both -min and -max specified. 0109 CmdArgs.tcl:515 both -min and -max specified. 0110 CmdArgs.tcl:542 only one of -early and -late can be specified. 0111 CmdArgs.tcl:548 -early or -late must be specified. 0112 CmdArgs.tcl:555 both -early and -late specified. 0113 CmdArgs.tcl:570 $arg_name must be a single library. 0114 CmdArgs.tcl:576 $arg_name type '$object_type' is not a library. 0115 CmdArgs.tcl:581 library '$arg' not found. 0116 CmdArgs.tcl:598 $arg_name must be a single lib cell. 0123 CmdArgs.tcl:685 $arg_name must be a single instance. 0124 CmdArgs.tcl:691 $arg_name type '$object_type' is not an instance. 0125 CmdArgs.tcl:696 instance '$arg' not found. 0126 CmdArgs.tcl:715 $arg_name type '$object_type' is not an instance. 0127 CmdArgs.tcl:722 instance '$arg' not found. 0128 CmdArgs.tcl:742 $arg_name type '$object_type' is not a liberty cell. 0129 CmdArgs.tcl:749 liberty cell '$arg' not found. 0131 CmdArgs.tcl:810 $arg_name type '$object_type' is not a pin or port. 0132 CmdArgs.tcl:817 pin '$arg' not found. 0133 CmdArgs.tcl:837 $arg_name type '$object_type' is not a port. 0139 CmdArgs.tcl:918 unsupported object type $object_type. 0141 CmdArgs.tcl:939 $arg_name '$object_type' is not a net. 0142 CmdArgs.tcl:963 unsupported object type $object_type. 0143 CmdArgs.tcl:944 $arg_name '$arg' not found. 0144 CmdArgs.tcl:408 corner object type '$object_type' is not a corner. 0160 CmdUtil.tcl:44 no commands match '$pattern'. 0161 CmdUtil.tcl:89 Usage: $cmd $cmd_args($cmd) 0162 CmdUtil.tcl:91 Usage: $cmd argument error 0164 CmdUtil.tcl:220 unsupported object type $list_type. 0165 CmdUtil.tcl:237 unknown namespace $namespc. 0166 CmdUtil.tcl:170 unknown unit $unit prefix '${arg_prefix}'. 0167 CmdUtil.tcl:173 incorrect unit suffix '$arg_suffix'. 0180 DelayCalc.tcl:126 delay calculator $alg not found. 0181 DelayCalc.tcl:151 set_assigned_delay missing -from argument. 0182 DelayCalc.tcl:156 set_assigned_delay missing -to argument. 0183 DelayCalc.tcl:161 set_assigned_delay delay is not a float. 0184 DelayCalc.tcl:166 set_annotated_delay -cell and -net options are mutually excluive. 0185 DelayCalc.tcl:172 set_assigned_delay pin [get_full_name $pin] is not attached to instance [get_full_name $inst]. 0186 DelayCalc.tcl:177 set_assigned_delay pin [get_full_name $pin] is not attached to instance [get_full_name $inst] 0187 DelayCalc.tcl:182 set_assigned_delay -cell or -net required. 0188 DelayCalc.tcl:247 set_assigned_check missing -from argument. 0189 DelayCalc.tcl:256 set_assigned_check -clock must be rise or fall. 0190 DelayCalc.tcl:263 set_assigned_check missing -to argument. 0191 DelayCalc.tcl:278 set_assigned_check missing -setup|-hold|-recovery|-removal check type.. 0192 DelayCalc.tcl:286 set_assigned_check check_value is not a float. 0193 DelayCalc.tcl:226 set_assigned_delay no timing arcs found between from/to pins. 0194 DelayCalc.tcl:338 set_assigned_check no check arcs found between from/to pins. 0204 ArnoldiDelayCalc.cc:607 arnoldi delay calc failed. 0210 DelayCalc.tcl:359 set_assigned_transition transition is not a float. 0220 Link.tcl:36 missing top_cell_name argument and no current_design. 0225 InternalPower.cc:192 unsupported table order 0226 InternalPower.cc:207 unsupported table axes 0230 Network.tcl:41 instance $instance_path not found. 0231 Network.tcl:217 net $net_path not found. 0232 Network.tcl:220 net $net_path not found. 0233 Network.tcl:30 report_instance -connections is deprecated. 0234 Network.tcl:34 report_instance -verbose is deprecated. 0235 Network.tcl:189 report_net -connections is deprecated. 0236 Network.tcl:193 report_net -verbose is deprecated. 0237 Network.tcl:197 report_net -hier_pins is deprecated. 0239 TableModel.cc:265 unsupported table order 0240 TableModel.cc:328 unsupported table axes 0241 TableModel.cc:545 unsupported table order 0242 TableModel.cc:563 unsupported table axes 0243 TimingArc.cc:242 timing arc max index exceeded 0244 Clock.cc:474 generated clock edges size is not three. 0245 CheckTiming.cc:428 unknown print flag 0246 Corner.cc:377 unknown parasitic analysis point count 0247 Corner.cc:421 unknown analysis point count 0249 GatedClk.cc:247 illegal gated clock active value 0250 NetworkEdit.tcl:107 unsupported object type $object_type. 0252 NetworkEdit.tcl:174 unsupported object type $object_type. 0253 NetworkEdit.tcl:192 unsupported object type $object_type. 0266 VertexVisitor.cc:32 VertexPinCollector::copy not supported. 0267 WriteSpice.cc:1217 out of memory 0268 VerilogWriter.cc:258 unknown port direction 0272 Parasitics.tcl:41 read_spef -quiet is deprecated. 0273 Parasitics.tcl:45 read_spef -reduce_to is deprecated. Use -reduce instead. 0274 Parasitics.tcl:50 read_spef -delete_after_reduce is deprecated. 0275 Parasitics.tcl:54 read_spef -save is deprecated. 0276 Parasitics.tcl:62 path instance '$path' not found. 0280 PathEnum.cc:574 diversion path not found 0301 Power.tcl:234 activity should be 0.0 to 1.0 or 2.0 0302 Power.tcl:242 duty should be 0.0 to 1.0 0303 Power.tcl:257 activity cannot be set on clock ports. 0304 Power.tcl:40 No liberty libraries have been read. 0305 Power.tcl:286 read_power_activities is deprecated. Use read_vcd. 0320 Property.tcl:32 $cmd object is null. 0321 Property.tcl:37 $cmd $type_key must be specified with object name argument. 0322 Property.tcl:77 get_property unsupported object type $object_type. 0323 Property.tcl:80 get_property $object is not an object. 0324 Property.tcl:107 $object_type not supported. 0325 Property.tcl:110 $object_type '$object_name' not found. 0326 Sdc.tcl:494 object '$pattern' is not an instance. 0327 Sdc.tcl:542 object '$pattern' is not an clock. 0328 Sdc.tcl:606 object '$pattern' is not a liberty cell. 0329 Sdc.tcl:689 object '$pattern' is not a liberty pin. 0330 Sdc.tcl:769 object '$pattern' is not a liberty library. 0331 Sdc.tcl:868 object '$pattern' is not a net. 0332 Sdc.tcl:948 object '$pattern' is not a pin. 0333 Sdc.tcl:1005 object '$pattern' is not a port. 0334 Sdc.tcl:2860 object '$cell_name' is not a liberty cell. 0335 Sdc.tcl:679 positional arguments not supported with -of_objects. 0340 Sdc.tcl:73 cannot open '$filename'. 0341 Sdc.tcl:128 incomplete command at end of file. 0342 Sdc.tcl:212 hierarchy separator must be one of '$sdc_dividers'. 0343 Sdc.tcl:256 unknown unit $unit prefix '${arg_prefix}'. 0344 Sdc.tcl:275 unknown $unit prefix '$prefix'. 0345 Sdc.tcl:281 $unit scale [format %.0e $scale] does not match library scale [format %.0e $unit_scale]. 0346 Sdc.tcl:358 only one of -cells, -data_pins, -clock_pins, -async_pins, -output_pins are suppported. 0347 Sdc.tcl:401 current_design for other than top cell not supported. 0348 Sdc.tcl:468 patterns argument not supported with -of_objects. 0349 Sdc.tcl:507 instance '$pattern' not found. 0350 Sdc.tcl:429 unsupported $object_type -filter expression. 0351 Sdc.tcl:551 clock '$pattern' not found. 0352 Sdc.tcl:581 positional arguments not supported with -of_objects. 0353 Sdc.tcl:618 library '$lib_name' not found. 0354 Sdc.tcl:630 cell '$cell_pattern' not found. 0355 Sdc.tcl:702 library/cell/port '$pattern' not found. 0356 Sdc.tcl:722 port '$port_pattern' not found. 0357 Sdc.tcl:727 library '$lib_name' not found. 0358 Sdc.tcl:742 -nocase ignored without -regexp. 0359 Sdc.tcl:778 library '$pattern' not found. 0360 Sdc.tcl:849 patterns argument not supported with -of_objects. 0361 Sdc.tcl:879 net '$pattern' not found. 0362 Sdc.tcl:912 patterns argument not supported with -of_objects. 0363 Sdc.tcl:959 pin '$pattern' not found. 0365 Sdc.tcl:994 patterns argument not supported with -of_objects. 0366 Sdc.tcl:1014 port '$pattern' not found. 0368 Sdc.tcl:1054 -add requires -name. 0369 Sdc.tcl:1059 -name or port_pin_list must be specified. 0370 Sdc.tcl:1067 missing -period argument. 0371 Sdc.tcl:1073 -waveform edge_list must have an even number of edge times. 0372 Sdc.tcl:1082 non-increasing clock -waveform edge times. 0373 Sdc.tcl:1085 -waveform time greater than two periods. 0374 Sdc.tcl:1143 empty ports/pins/nets argument. 0375 Sdc.tcl:1151 -add requires -name. 0376 Sdc.tcl:1156 name or port_pin_list must be specified. 0377 Sdc.tcl:1163 missing -source argument. 0378 Sdc.tcl:1178 -master_clock argument empty. 0379 Sdc.tcl:1181 -add requireds -master_clock. 0380 Sdc.tcl:1185 -multiply_by and -divide_by options are exclusive. 0381 Sdc.tcl:1189 -divide_by is not an integer greater than one. 0382 Sdc.tcl:1192 -combinational implies -divide_by 1. 0383 Sdc.tcl:1197 -multiply_by is not an integer greater than one. 0384 Sdc.tcl:1203 -duty_cycle is not a float between 0 and 100. 0385 Sdc.tcl:1209 -edges only supported for three edges. 0386 Sdc.tcl:1215 edges times are not monotonically increasing. 0387 Sdc.tcl:1224 -edge_shift length does not match -edges length. 0388 Sdc.tcl:1230 missing -multiply_by, -divide_by, -combinational or -edges argument. 0389 Sdc.tcl:1238 cannot specify -invert without -multiply_by, -divide_by or -combinational. 0390 Sdc.tcl:1244 -duty_cycle requires -multiply_by value. 0391 Sdc.tcl:1304 group_path command failed. 0392 Sdc.tcl:1311 positional arguments not supported. 0393 Sdc.tcl:1315 -from, -through or -to required. 0394 Sdc.tcl:1321 -name and -default are mutually exclusive. 0395 Sdc.tcl:1323 -name or -default option is required. 0396 Sdc.tcl:1364 cannot specify both -high and -low. 0397 Sdc.tcl:1372 missing -setup or -hold argument. 0398 Sdc.tcl:1386 -high and -low only permitted for pins and instances. 0399 Sdc.tcl:1393 -high and -low only permitted for pins and instances. 0400 Sdc.tcl:1436 one of -logically_exclusive, -physically_exclusive or -asynchronous is required. 0401 Sdc.tcl:1439 the keywords -logically_exclusive, -physically_exclusive and -asynchronous are mutually exclusive. 0402 Sdc.tcl:1458 unknown keyword argument $arg. 0403 Sdc.tcl:1460 extra positional argument $arg. 0404 Sdc.tcl:1489 the -all and -name options are mutually exclusive. 0405 Sdc.tcl:1492 either -all or -name options must be specified. 0406 Sdc.tcl:1500 one of -logically_exclusive, -physically_exclusive or -asynchronous is required. 0407 Sdc.tcl:1503 the keywords -logically_exclusive, -physically_exclusive and -asynchronous are mutually exclusive. 0408 Sdc.tcl:1553 -clock ignored for clock objects. 0409 Sdc.tcl:1567 -source '[get_full_name $pin]' is not a clock pin. 0410 Sdc.tcl:1574 -early/-late is only allowed with -source. 0411 Sdc.tcl:1603 -clock ignored for clock objects. 0412 Sdc.tcl:1615 -source '[$pin path_name]' is not a clock pin. 0413 Sdc.tcl:1643 set_sense -type data not supported. 0414 Sdc.tcl:1647 set_sense -type clock|data 0415 Sdc.tcl:1658 set_clock_sense is deprecated as of SDC 2.1. Use set_sense -type clock. 0416 Sdc.tcl:1670 -pulse argument not supported. 0417 Sdc.tcl:1679 -positive, -negative, -stop_propagation and -pulse are mutually exclusive. 0418 Sdc.tcl:1692 hierarchical pin '[get_full_name $pin]' not supported. 0419 Sdc.tcl:1716 transition time can not be specified for virtual clocks. 0420 Sdc.tcl:1749 missing uncertainty value. 0421 Sdc.tcl:1797 -from/-to must be used together. 0422 Sdc.tcl:1817 -rise, -fall options not allowed for single clock uncertainty. 0423 Sdc.tcl:1883 -from/-to must be used together. 0424 Sdc.tcl:1903 -rise, -fall options not allowed for single clock uncertainty. 0425 Sdc.tcl:1944 missing -from, -rise_from or -fall_from argument. 0426 Sdc.tcl:1956 missing -to, -rise_to or -fall_to argument. 0427 Sdc.tcl:2004 missing -from, -rise_from or -fall_from argument. 0428 Sdc.tcl:2016 missing -to, -rise_to or -fall_to argument. 0429 Sdc.tcl:2058 -from/-to keywords ignored for lib_pin, port and pin arguments. 0430 Sdc.tcl:2088 -from/-to hierarchical instance not supported. 0431 Sdc.tcl:2120 pin '[get_full_name $inst]${hierarchy_separator}${port_name}' not found. 0432 Sdc.tcl:2177 pin '[get_name $cell]${hierarchy_separator}${port_name}' not found. 0434 Sdc.tcl:2211 -from/-to keywords ignored for lib_pin, port and pin arguments. 0435 Sdc.tcl:2263 -from/-to hierarchical instance not supported. 0436 Sdc.tcl:2317 '$args' ignored. 0437 Sdc.tcl:2321 -from, -through or -to required. 0438 Sdc.tcl:2400 -source_latency_included ignored with -reference_pin. 0439 Sdc.tcl:2403 -network_latency_included ignored with -reference_pin. 0440 Sdc.tcl:2422 $cmd not allowed on [pin_direction $pin] port '[get_full_name $pin]'. 0441 Sdc.tcl:2424 $cmd relative to a clock defined on the same port/pin not allowed. 0442 Sdc.tcl:2472 missing delay argument. 0443 Sdc.tcl:2478 '$args' ignored. 0444 Sdc.tcl:2603 missing path multiplier argument. 0445 Sdc.tcl:2608 '$args' ignored. 0446 Sdc.tcl:2615 cannot use -start with -end. 0447 Sdc.tcl:2665 $cmd command failed. 0448 Sdc.tcl:2672 positional arguments not supported. 0449 Sdc.tcl:2676 -from, -through or -to required. 0450 Sdc.tcl:2743 virtual clock [get_name $clk] can not be propagated. 0451 Sdc.tcl:2785 value must be 0, zero, 1, one, rise, rising, fall, or falling. 0452 Sdc.tcl:2854 cell '$lib_name:$cell_name' not found. 0453 Sdc.tcl:2867 '$cell_name' not found. 0454 Sdc.tcl:2871 missing -lib_cell argument. 0455 Sdc.tcl:2879 port '$to_port_name' not found. 0456 Sdc.tcl:2891 -pin argument required for cells with multiple outputs. 0457 Sdc.tcl:2906 port '$from_port_name' not found. 0458 Sdc.tcl:2924 -multiply_by ignored. 0459 Sdc.tcl:2927 -dont_scale ignored. 0460 Sdc.tcl:2930 -no_design_rule ignored. 0461 Sdc.tcl:2953 set_fanout_load not supported. 0462 Sdc.tcl:2977 -clock not supported. 0463 Sdc.tcl:2980 -clock_fall not supported. 0464 Sdc.tcl:3030 -pin_load not allowed for net objects. 0465 Sdc.tcl:3033 -wire_load not allowed for net objects. 0466 Sdc.tcl:3036 -rise/-fall not allowed for net objects. 0467 Sdc.tcl:3123 port '[get_name $port]' is not an input. 0468 Sdc.tcl:3169 -data_path, -clock_path, -rise, -fall ignored for ports and designs. 0469 Sdc.tcl:3240 derating factor greater than 2.0. 0470 Sdc.tcl:3277 -cell_delay and -cell_check flags ignored for net objects. 0471 Sdc.tcl:3347 no valid objects specified for $key. 0472 Sdc.tcl:3380 no valid objects specified for $key 0473 Sdc.tcl:3429 no valid objects specified for $key. 0474 Sdc.tcl:3497 operating condition '$op_cond_name' not found. 0475 Sdc.tcl:3515 operating condition '$op_cond_name' not found. 0476 Sdc.tcl:3529 -analysis_type must be single, bc_wc or on_chip_variation. 0477 Sdc.tcl:3541 set_wire_load_min_block_size not supported. 0478 Sdc.tcl:3554 mode must be top, enclosed or segmented. 0479 Sdc.tcl:3569 no wire load model specified. 0480 Sdc.tcl:3591 wire load model '$model_name' not found. 0481 Sdc.tcl:3630 wire load selection group '$selection_name' not found. 0482 Sdc.tcl:3718 define_corners must be called before read_liberty. 0500 Sdc.tcl:3791 no default operating conditions found. 0501 Sdc.tcl:259 incorrect unit suffix '$arg_suffix'. 0502 Search.tcl:165 $cmd -endpoint_count is deprecated. Use -endpoint_path_count instead. 0503 Search.tcl:178 $cmd -group_count is deprecated. Use -group_path_count instead. 0510 Search.tcl:137 $cmd -path_delay must be min, min_rise, min_fall, max, max_rise, max_fall or min_max. 0511 Search.tcl:147 $cmd command failed. 0512 Search.tcl:172 -endpoint_path_count must be a positive integer. 0513 Search.tcl:186 -group_path_count must be >= 1. 0514 Search.tcl:216 '$arg' is not a known keyword or flag. 0515 Search.tcl:218 positional arguments not supported. 0516 Search.tcl:339 report_clock_skew -setup and -hold are mutually exclusive options. 0520 Search.tcl:543 analysis type single is not consistent with doing both setup/max and hold/min checks. 0521 Search.tcl:548 positional arguments not supported. 0522 Search.tcl:802 -min and -max cannot both be specified. 0523 Search.tcl:822 pin '$pin_arg' is hierarchical. 0524 Search.tcl:878 -format $format not recognized. 0526 Search.tcl:1026 specify one of -setup and -hold. 0527 Search.tcl:1076 unknown path group '$name'. 0540 Sta.tcl:158 -from/-to arguments not supported with -of_objects. 0560 Util.tcl:44 $cmd $key missing value. 0561 Util.tcl:61 $cmd $key missing value. 0562 Util.tcl:71 $cmd $arg is not a known keyword or flag. 0563 Util.tcl:93 $cmd $arg is not a known keyword or flag. 0564 Util.tcl:241 $cmd positional arguments not supported. 0565 Util.tcl:247 $cmd requires one positional argument. 0566 Util.tcl:254 $cmd requires zero or one positional arguments. 0567 Util.tcl:260 $cmd requires two positional arguments. 0568 Util.tcl:267 $cmd requires one or two positional arguments. 0569 Util.tcl:273 $cmd requires three positional arguments. 0570 Util.tcl:279 $cmd requires four positional arguments. 0571 Util.tcl:287 $cmd_arg '$arg' is not a float. 0572 Util.tcl:293 $cmd_arg '$arg' is not a positive float. 0573 Util.tcl:299 $cmd_arg '$arg' is not an integer. 0574 Util.tcl:305 $cmd_arg '$arg' is not a positive integer. 0575 Util.tcl:311 $cmd_arg '$arg' is not an integer greater than or equal to one. 0576 Util.tcl:317 $cmd_arg '$arg' is not between 0 and 100. 0577 Sdc.tcl:3721 define_corners must define at least one corner. 0590 Variables.tcl:37 sta_report_default_digits must be a positive integer. 0591 Variables.tcl:62 sta_crpr_mode must be pin or transition. 0592 Variables.tcl:179 $var_name value must be 0 or 1. 0616 Levelize.cc:220 maximum logic level exceeded 0620 Sdf.tcl:41 -cond_use must be min, max or min_max. 0621 Sdf.tcl:46 -cond_use min_max cannot be used with analysis type single. 0623 Sdf.tcl:154 SDF -divider must be / or . 0800 VcdReader.cc:112 unhandled vcd command. 0801 VcdReader.cc:151 timescale syntax error. 0802 VcdReader.cc:165 Unknown timescale unit. 0804 VcdReader.cc:222 Variable syntax error. 1000 ConcreteNetwork.cc:1973 cell type %s can not be linked. 1010 CycleAccting.cc:87 No common period was found between clocks %s and %s. 1040 DmpCeff.cc:1510 parasitic Pi model has NaNs. 1041 DmpCeff.cc:1536 cell %s delay model not supported on SPF parasitics by DMP delay calculator 1060 Genclks.cc:275 no master clock found for generated clock %s. 1062 Genclks.cc:939 generated clock %s source pin %s missing paths from master clock %s. 1100 Power.cc:559 unknown cudd constant 1110 Liberty.cc:763 cell %s/%s port %s not found in cell %s/%s. 1111 Liberty.cc:789 cell %s/%s %s -> %s timing group %s not found in cell %s/%s. 1112 Liberty.cc:808 Liberty cell %s/%s for corner %s/%s not found. 1113 Liberty.cc:1824 cell %s/%s %s -> %s latch enable %s_edge is inconsistent with %s -> %s setup_%s check. 1114 Liberty.cc:1765 cell %s/%s %s -> %s latch enable %s_edge is inconsistent with latch group enable function positive sense. 1115 Liberty.cc:1773 cell %s/%s %s -> %s latch enable %s_edge is inconsistent with latch group enable function negative sense. 1116 Liberty.cc:362 unsupported slew degradation table axes 1117 Liberty.cc:378 unsupported slew degradation table axes 1118 Liberty.cc:383 unsupported slew degradation table order 1119 Liberty.cc:413 unsupported slew degradation table axes 1120 Liberty.cc:1979 library missing vdd 1121 Liberty.cc:1391 timing arc count mismatch 1125 LibertyParser.cc:310 valueIterator called for LibertySimpleAttribute 1126 LibertyParser.cc:390 LibertyStringAttrValue called for float value 1127 LibertyParser.cc:420 LibertyStringAttrValue called for float value 1130 LibertyExpr.cc:82 %s references unknown port %s. 1131 LibertyExpr.cc:175 %s %s. 1140 LibertyReader.cc:632 library %s already exists. 1141 LibertyReader.cc:665 library missing name. 1142 LibertyReader.cc:691 default_wire_load %s not found. 1143 LibertyReader.cc:702 default_wire_selection %s not found. 1144 LibertyReader.cc:714 default_operating_condition %s not found. 1145 LibertyReader.cc:724 input_threshold_pct_%s not found. 1146 LibertyReader.cc:728 output_threshold_pct_%s not found. 1147 LibertyReader.cc:732 slew_lower_threshold_pct_%s not found. 1148 LibertyReader.cc:736 slew_upper_threshold_pct_%s not found. 1149 LibertyReader.cc:741 Library %s is missing one or more thresholds. 1150 LibertyReader.cc:820 unknown unit multiplier %s. 1151 LibertyReader.cc:843 unknown unit scale %c. 1152 LibertyReader.cc:846 unknown unit suffix %s. 1153 LibertyReader.cc:849 unknown unit suffix %s. 1154 LibertyReader.cc:874 capacitive_load_units are not ff or pf. 1155 LibertyReader.cc:877 capacitive_load_units are not a string. 1156 LibertyReader.cc:880 capacitive_load_units missing suffix. 1157 LibertyReader.cc:883 capacitive_load_units scale is not a float. 1158 LibertyReader.cc:886 capacitive_load_units missing scale and suffix. 1159 LibertyReader.cc:889 capacitive_load_unit missing values suffix. 1160 LibertyReader.cc:907 delay_model %s not supported. 1161 LibertyReader.cc:911 delay_model %s not supported. 1162 LibertyReader.cc:915 delay_model %s not supported. 1163 LibertyReader.cc:920 delay_model %s not supported.. 1164 LibertyReader.cc:923 unknown delay_model %s. 1165 LibertyReader.cc:942 unknown bus_naming_style format. 1166 LibertyReader.cc:963 voltage_map voltage is not a float. 1167 LibertyReader.cc:966 voltage_map missing voltage. 1168 LibertyReader.cc:969 voltage_map supply name is not a string. 1169 LibertyReader.cc:972 voltage_map missing supply name and voltage. 1170 LibertyReader.cc:975 voltage_map missing values suffix. 1171 LibertyReader.cc:1060 default_max_transition is 0.0. 1172 LibertyReader.cc:1075 default_max_fanout is 0.0. 1173 LibertyReader.cc:1165 default_fanout_load is 0.0. 1174 LibertyReader.cc:1193 default_wire_load_mode %s not found. 1175 LibertyReader.cc:1379 table template missing name. 1176 LibertyReader.cc:1424 missing variable_%d attribute. 1177 LibertyReader.cc:1500 missing table index values. 1178 LibertyReader.cc:1506 non-increasing table index values. 1179 LibertyReader.cc:1538 bus type %s missing bit_from. 1180 LibertyReader.cc:1540 bus type %s missing bit_to. 1181 LibertyReader.cc:1544 type missing name. 1182 LibertyReader.cc:1571 scaling_factors do not have a name. 1183 LibertyReader.cc:1740 operating_conditions missing name. 1184 LibertyReader.cc:1811 wire_load missing name. 1185 LibertyReader.cc:1854 fanout_length is missing length and fanout. 1186 LibertyReader.cc:1869 wire_load_selection missing name. 1187 LibertyReader.cc:1900 wireload %s not found. 1189 LibertyReader.cc:1907 wire_load_from_area min not a float. 1190 LibertyReader.cc:1910 wire_load_from_area max not a float. 1191 LibertyReader.cc:1913 wire_load_from_area missing parameters. 1192 LibertyReader.cc:1916 wire_load_from_area missing parameters. 1193 LibertyReader.cc:1935 cell missing name. 1194 LibertyReader.cc:1959 cell %s ocv_derate_group %s not found. 1195 LibertyReader.cc:1992 port %s function size does not match port size. 1196 LibertyReader.cc:2089 %s %s bus width mismatch. 1197 LibertyReader.cc:2100 %s %s bus width mismatch. 1198 LibertyReader.cc:2110 clear 1199 LibertyReader.cc:2120 preset 1200 LibertyReader.cc:2156 latch enable function is non-unate for port %s. 1201 LibertyReader.cc:2161 latch enable function is unknown for port %s. 1202 LibertyReader.cc:2263 operating conditions %s not found. 1203 LibertyReader.cc:2266 scaled_cell missing operating condition. 1204 LibertyReader.cc:2269 scaled_cell cell %s has not been defined. 1205 LibertyReader.cc:2272 scaled_cell missing name. 1206 LibertyReader.cc:2298 scaled_cell %s, %s port functions do not match cell port functions. 1207 LibertyReader.cc:2303 scaled_cell ports do not match cell ports. 1208 LibertyReader.cc:2305 scaled_cell %s, %s timing does not match cell timing. 1209 LibertyReader.cc:2324 combinational timing to an input port. 1210 LibertyReader.cc:2419 missing %s_transition. 1211 LibertyReader.cc:2421 missing cell_%s. 1212 LibertyReader.cc:2442 timing group from output port. 1213 LibertyReader.cc:2452 timing group from output port. 1214 LibertyReader.cc:2462 timing group from output port. 1215 LibertyReader.cc:2497 timing group from output port. 1217 LibertyReader.cc:2507 timing group from output port. 1218 LibertyReader.cc:2608 receiver_capacitance group not in timing or pin group. 1219 LibertyReader.cc:2626 unsupported model axis. 1220 LibertyReader.cc:2654 output_current_%s group not in timing group. 1221 LibertyReader.cc:2696 output current waveform %.2e %.2e not found. 1222 LibertyReader.cc:2717 unsupported model axis. 1223 LibertyReader.cc:2759 vector index_1 and index_2 must have exactly one value. 1224 LibertyReader.cc:2761 vector reference_time not found. 1225 LibertyReader.cc:2794 normalized_driver_waveform variable_2 must be normalized_voltage 1226 LibertyReader.cc:2797 normalized_driver_waveform variable_1 must be input_net_transition 1228 LibertyReader.cc:3019 level_shifter_type must be HL, LH, or HL_LH 1229 LibertyReader.cc:3055 switch_cell_type must be coarse_grain or fine_grain 1230 LibertyReader.cc:3079 scaling_factors %s not found. 1231 LibertyReader.cc:3140 pin name is not a string. 1232 LibertyReader.cc:3157 pin name is not a string. 1233 LibertyReader.cc:3171 pin name is not a string. 1234 LibertyReader.cc:3243 bus %s bus_type not found. 1235 LibertyReader.cc:3295 bus_type %s not found. 1236 LibertyReader.cc:3298 bus_type is not a string. 1237 LibertyReader.cc:3316 bundle %s member not found. 1238 LibertyReader.cc:3339 member is not a string. 1239 LibertyReader.cc:3346 members attribute is missing values. 1240 LibertyReader.cc:3397 unknown port direction. 1241 LibertyReader.cc:3644 max_transition is 0.0. 1242 LibertyReader.cc:3750 pulse_latch unknown pulse type. 1243 LibertyReader.cc:4202 timing group missing related_pin/related_bus_pin. 1244 LibertyReader.cc:4301 unknown timing_type %s. 1245 LibertyReader.cc:4321 unknown timing_sense %s. 1246 LibertyReader.cc:4361 mode value is not a string. 1247 LibertyReader.cc:4364 missing mode value. 1248 LibertyReader.cc:4367 mode name is not a string. 1249 LibertyReader.cc:4370 mode missing values. 1250 LibertyReader.cc:4373 mode missing mode name and value. 1251 LibertyReader.cc:4449 unsupported model axis. 1252 LibertyReader.cc:4476 unsupported model axis. 1253 LibertyReader.cc:4505 unsupported model axis. 1254 LibertyReader.cc:4540 unsupported model axis. 1255 LibertyReader.cc:4556 %s group not in timing group. 1256 LibertyReader.cc:4595 table template %s not found. 1257 LibertyReader.cc:4679 %s is missing values. 1258 LibertyReader.cc:4702 %s is not a list of floats. 1259 LibertyReader.cc:4704 table row has %u columns but axis has %d. 1260 LibertyReader.cc:4714 table has %u rows but axis has %d. 1261 LibertyReader.cc:4765 lut output is not a string. 1262 LibertyReader.cc:4781 cell %s test_cell redefinition. 1263 LibertyReader.cc:4829 mode definition missing name. 1264 LibertyReader.cc:4846 mode value missing name. 1265 LibertyReader.cc:4860 when attribute inside table model. 1266 LibertyReader.cc:4909 %s attribute is not a string. 1267 LibertyReader.cc:4912 %s is not a simple attribute. 1268 LibertyReader.cc:4932 %s attribute is not an integer. 1269 LibertyReader.cc:4935 %s is not a simple attribute. 1270 LibertyReader.cc:4948 %s is not a simple attribute. 1271 LibertyReader.cc:4974 %s value %s is not a float. 1272 LibertyReader.cc:5003 %s missing values. 1273 LibertyReader.cc:5007 %s missing values. 1274 LibertyReader.cc:5010 %s is not a complex attribute. 1275 LibertyReader.cc:5036 %s is not a float. 1276 LibertyReader.cc:5059 %s is missing values. 1277 LibertyReader.cc:5062 %s has more than one string. 1278 LibertyReader.cc:5071 %s is missing values. 1279 LibertyReader.cc:5096 %s attribute is not boolean. 1280 LibertyReader.cc:5099 %s attribute is not boolean. 1281 LibertyReader.cc:5102 %s is not a simple attribute. 1282 LibertyReader.cc:5118 attribute %s value %s not recognized. 1283 LibertyReader.cc:5149 unknown early/late value. 1284 LibertyReader.cc:5369 OCV derate group named %s not found. 1285 LibertyReader.cc:5385 ocv_derate missing name. 1286 LibertyReader.cc:5438 unknown rise/fall. 1287 LibertyReader.cc:5458 unknown derate type. 1288 LibertyReader.cc:5490 unsupported model axis. 1289 LibertyReader.cc:5522 unsupported model axis. 1290 LibertyReader.cc:5554 unsupported model axis. 1291 LibertyReader.cc:5625 unknown pg_type. 1292 LibertyReader.cc:6039 port %s subscript out of range. 1293 LibertyReader.cc:6043 port range %s of non-bus port %s. 1294 LibertyReader.cc:6057 port %s not found. 1295 LibertyReader.cc:6127 port %s not found. 1297 LibertyReader.cc:1466 axis type %s not supported. 1298 LibertyReader.cc:2180 statetable input port %s not found. 1299 LibertyReader.cc:3809 unknown signal_type %s. 1300 LibertyReader.cc:4076 table row must have 3 groups separated by ':'. 1301 LibertyReader.cc:4081 table row has %zu input values but %zu are required. 1302 LibertyReader.cc:4088 table row has %zu current values but %zu are required. 1303 LibertyReader.cc:4095 table row has %zu next values but %zu are required. 1304 LibertyReader.cc:4141 table input value '%s' not recognized. 1305 LibertyReader.cc:4160 table internal value '%s' not recognized. 1340 LibertyWriter.cc:308 %s/%s bundled ports not supported. 1341 LibertyWriter.cc:456 %s/%s/%s timing model not supported. 1342 LibertyWriter.cc:476 3 axis table models not supported. 1343 LibertyWriter.cc:625 %s/%s/%s timing arc type %s not supported. 1350 LumpedCapDelayCalc.cc:138 gate delay input variable is NaN 1355 MakeTimingModel.cc:227 clock %s pin %s is inside model block. 1360 Vcd.cc:172 Unknown variable %s ID %s 1370 PathEnum.cc:478 path diversion missing edge. 1398 VerilogReader.cc:1860 %s is not a verilog module. 1399 VerilogReader.cc:1865 %s is not a verilog module. 1400 PathVertex.cc:236 missing arrivals. 1401 PathVertex.cc:250 missing arrivals. 1402 PathVertex.cc:279 missing requireds. 1422 PathVertexRep.cc:153 missing arrivals. 1450 ReadVcdActivities.cc:107 VCD max time is zero. 1451 ReadVcdActivities.cc:174 problem parsing bus %s. 1452 ReadVcdActivities.cc:250 clock %s vcd period %s differs from SDC clock period %s 1521 Sim.cc:511 propagated logic value %c differs from constraint value of %c on pin %s. 1525 SpefParse.yy:805 %d is not positive. 1526 SpefParse.yy:814 %.4f is not positive. 1527 SpefParse.yy:820 %.4f is not positive. 1550 Sta.cc:2000 '%s' is not a valid start point. 1551 Sta.cc:2073 '%s' is not a valid endpoint. 1552 Sta.cc:2076 '%s' is not a valid endpoint. 1553 Sta.cc:2393 maximum corner count exceeded 1554 Sta.cc:1997 '%s' is not a valid start point. 1570 Sta.cc:3413 No network has been linked. 1574 Search.i:1026 POCV support requires compilation with SSTA=1. 1575 Search.i:465 unknown report path field %s 1576 Search.i:477 unknown report path field %s 1602 WriteSpice.cc:458 Liberty pg_port %s/%s missing voltage_name attribute, 1603 WriteSpice.cc:428 %s pg_port %s not found, 1604 WriteSpice.cc:1019 no register/latch found for path from %s to %s, 1605 WriteSpice.cc:241 The subkct file %s is missing definitions for %s 1606 WriteSpice.cc:270 subckt %s port %s has no corresponding liberty port, pg_port and is not power or ground. 1640 SpefReader.cc:157 illegal bus delimiters. 1641 SpefReader.cc:241 unknown units %s. 1642 SpefReader.cc:254 unknown units %s. 1643 SpefReader.cc:267 unknown units %s. 1644 SpefReader.cc:282 unknown units %s. 1645 SpefReader.cc:303 no name map entry for %d. 1646 SpefReader.cc:322 unknown port direction %s. 1647 SpefReader.cc:349 pin %s not found. 1648 SpefReader.cc:352 instance %s not found. 1650 SpefReader.cc:372 net %s not found. 1651 SpefReader.cc:486 %s not connected to net %s. 1652 SpefReader.cc:492 pin %s not found. 1653 SpefReader.cc:506 %s not connected to net %s. 1654 SpefReader.cc:512 node %s not a pin or net:number 1655 SpefReader.cc:524 %s not connected to net %s. 1656 SpefReader.cc:528 pin %s not found. 1657 SpefReader.cc:645 %s. 1658 SpefReader.cc:61 Delay calculator %s does not support reduction. 1700 CcsCeffDelayCalc.cc:102 VDD not defined in library %s 1701 CcsCeffDelayCalc.cc:273 unsupported ccs region count. 1720 PrimaDelayCalc.cc:229 VDD not defined in library %s 1751 ArcDcalcWaveforms.cc:56 VDD not defined in library %s 1752 PrimaDelayCalc.cc:765 G matrix is singular. 1903 WriteSpice.tcl:145 Cannot write $spice_dir. 1904 WriteSpice.tcl:148 No -spice_filename specified. 1905 WriteSpice.tcl:154 -lib_subckt_file $lib_subckt_file is not readable. 1906 WriteSpice.tcl:157 No -lib_subckt_file specified. 1907 WriteSpice.tcl:163 -model_file $model_file is not readable. 1908 WriteSpice.tcl:166 No -model_file specified. 1909 WriteSpice.tcl:172 No -power specified. 1910 WriteSpice.tcl:111 Unknown circuit simulator 1913 WriteSpice.tcl:244 Cannot write $plot_dir. 1914 WriteSpice.tcl:247 No -plot_basename specified. 1915 WriteSpice.tcl:178 No -ground specified. 1920 WriteSpice.tcl:36 Directory $spice_dir not found. 1921 WriteSpice.tcl:39 $spice_dir is not a directory. 1922 WriteSpice.tcl:42 Cannot write in $spice_dir. 1923 WriteSpice.tcl:45 No -spice_directory specified. 1924 WriteSpice.tcl:51 -lib_subckt_file $lib_subckt_file is not readable. 1925 WriteSpice.tcl:54 No -lib_subckt_file specified. 1926 WriteSpice.tcl:60 -model_file $model_file is not readable. 1927 WriteSpice.tcl:63 No -model_file specified. 1928 WriteSpice.tcl:69 No -power specified. 1929 WriteSpice.tcl:75 No -ground specified. 1930 WriteSpice.tcl:81 No -path_args specified. 1931 WriteSpice.tcl:86 No paths found for -path_args $path_args. 1932 WriteSpice.tcl:139 Missing -gates argument. 1933 WriteSpice.tcl:212 Missing -gates argument. 2100 ArcDelayCalc.cc:86 no timing arc for %s input/driver pins. 2101 ArcDelayCalc.cc:91 %s not a valid rise/fall. 2102 ArcDelayCalc.cc:94 Pin %s/%s not found. 2103 ArcDelayCalc.cc:97 %s not a valid rise/fall. 2104 ArcDelayCalc.cc:100 Pin %s/%s not found. 2105 ArcDelayCalc.cc:103 Instance %s not found. 2120 Network.i:255 unknown namespace 2121 Sdc.i:104 unknown analysis type 2122 Sdc.i:227 unknown wire load mode 2140 StaTclTypes.i:424 Delay calc arg requires 5 or 6 args. 2141 Sta.cc:3417 No liberty libraries found. 2200 Crpr.cc:62 missing prev paths 2201 Crpr.cc:73 missing prev paths