1 DmpCeff.cc:1589 cell %s delay model not supported on SPF parasitics by DMP delay calculator 8 ConcreteNetwork.cc:1867 cell type %s can not be linked. 9 Sdc.cc:2465 No common period was found between clocks %s and %s. 10 Genclks.cc:289 no master clock found for generated clock %s. 11 Genclks.cc:331 generated clock %s is in the fanout of multiple clocks. 13 Genclks.cc:990 generated clock %s source pin %s missing paths from master clock %s. 15 Sim.cc:861 propagated logic value %c differs from constraint value of %c on pin %s. 16 Sta.cc:2010 '%s' is not a valid startoint. 17 Sta.cc:2085 '%s' is not a valid endpoint. 21 SpefParse.yy:805 %d is not positive. 22 SpefParse.yy:814 %.4f is not positive. 23 SpefParse.yy:820 %.4f is not positive. 24 WritePathSpice.cc:425 pg_pin %s/%s voltage %s not found, 25 WritePathSpice.cc:432 Liberty pg_port %s/%s missing voltage_name attribute, 26 WritePathSpice.cc:962 %s pg_port %s not found, 27 WritePathSpice.cc:1016 no register/latch found for path from %s to %s, 28 WritePathSpice.cc:1383 The following subkcts are missing from %s 29 WritePathSpice.cc:1441 subckt %s port %s has no corresponding liberty port, pg_port and is not power or ground. 160 Sta.cc:2007 '%s' is not a valid startpoint. 161 Sta.cc:2082 '%s' is not a valid endpoint. 162 VerilogReader.cc:1750 %s is not a verilog module. 163 VerilogReader.cc:1755 %s is not a verilog module. 179 SpefReader.cc:723 %s. 204 StaTcl.i:4118 POCV support requires compilation with SSTA=1. 207 GraphDelayCalc1.cc:746 port not found in cell 208 Graph.cc:744 arc_delay_annotated array bounds exceeded 209 Graph.cc:759 arc_delay_annotated array bounds exceeded 210 Graph.cc:771 arc_delay_annotated array bounds exceeded 211 SdcNetwork.cc:1026 inst path string lenth estimate busted 212 SdcNetwork.cc:1098 inst path string lenth estimate exceeded 213 Sdc.cc:4181 group path name and is_default are mutually exclusive. 214 WriteSdc.cc:1332 unknown exception type 215 WriteSdc.cc:1903 illegal set_logic value 216 WriteSdc.cc:1947 invalid set_case_analysis value 228 Graph.cc:784 arc_delay_annotated array bounds exceeded 251 PathEnumed.cc:126 enumerated path required time 252 PathEnumed.cc:135 enumerated path required time 253 PathGroup.cc:402 unknown path end type 254 PathVertexRep.cc:144 tag group missing tag 255 ReportPath.cc:290 unsupported path type 256 ReportPath.cc:311 unsupported path type 257 ReportPath.cc:354 unsupported path type 258 ReportPath.cc:2354 generated clock pll source path too short. 259 ReportPath.cc:2532 unsupported path type 260 Search.cc:2659 max tag group index exceeded 261 Search.cc:2885 max tag index exceeded 262 Search.cc:3570 unexpected filter path 263 Search.cc:3738 tns incr existing vertex 264 Sta.cc:3877 corresponding timing arc set not found in equiv cells 265 TagGroup.cc:330 tag group missing tag 300 Util.tcl:218 no commands match '$pattern'. 301 Power.tcl:223 activity should be 0.0 to 1.0 or 2.0 302 Power.tcl:231 duty should be 0.0 to 1.0 303 Cmds.tcl:552 -clock ignored for clock objects. 304 Cmds.tcl:756 -from/-to keywords ignored for lib_pin, port and pin arguments. 305 Cmds.tcl:1038 object '$obj' not found. 313 Cmds.tcl:1707 unsupported object type $object_type. 315 Cmds.tcl:1728 $arg_name '$object_type' is not a net. 316 Cmds.tcl:1733 $arg_name '$arg' not found. 318 Search.tcl:379 unknown path group '$name'. 319 Sdc.tcl:277 $unit scale [format %.0e $scale] does not match library scale [format %.0e $unit_scale]. 320 Sdc.tcl:478 current_design for other than top cell not supported. 321 Sdc.tcl:515 patterns argument not supported with -of_objects. 322 Sdc.tcl:550 instance '$pattern' not found. 323 Sdc.tcl:611 clock '$pattern' not found. 324 Sdc.tcl:638 positional arguments not supported with -of_objects. 325 Sdc.tcl:664 library '$lib_name' not found. 326 Sdc.tcl:676 cell '$cell_pattern' not found. 327 Sdc.tcl:723 library/cell/port '$pattern' not found. 328 Sdc.tcl:743 port '$port_pattern' not found. 329 Sdc.tcl:748 library '$lib_name' not found. 330 Sdc.tcl:758 -nocase ignored without -regexp. 331 Sdc.tcl:784 library '$pattern' not found. 332 Sdc.tcl:847 patterns argument not supported with -of_objects. 333 Sdc.tcl:871 net '$pattern' not found. 334 Sdc.tcl:900 patterns argument not supported with -of_objects. 335 Sdc.tcl:937 pin '$pattern' not found. 336 Sdc.tcl:994 patterns argument not supported with -of_objects. 337 Sdc.tcl:1008 port '$pattern' not found. 338 Sdc.tcl:1109 adjusting non-increasing clock -waveform edge times. 339 Sdc.tcl:1113 -waveform time greater than two periods. 341 Sdc.tcl:1471 extra positional argument $arg. 342 Sdc.tcl:1504 -clock ignored for clock objects. 343 Sdc.tcl:1550 set_sense -type data not supported. 344 Sdc.tcl:1565 set_clock_sense is deprecated as of SDC 2.1. Use set_sense -type clock. 345 Sdc.tcl:1577 -pulse argument not supported. 346 Sdc.tcl:1586 -positive, -negative, -stop_propagation and -pulse are mutually exclusive. 347 Sdc.tcl:1599 hierarchical pin '[get_full_name $pin]' not supported. 348 Sdc.tcl:1801 -from/-to keywords ignored for lib_pin, port and pin arguments. 349 Sdc.tcl:1469 unknown keyword argument $arg. 350 Sdc.tcl:1949 -from, -through or -to required. 351 Sdc.tcl:2028 -source_latency_included ignored with -reference_pin. 352 Sdc.tcl:2031 -network_latency_included ignored with -reference_pin. 353 Sdc.tcl:2050 $cmd not allowed on [pin_direction $pin] port '[get_full_name $pin]'. 354 Sdc.tcl:2052 $cmd relative to a clock defined on the same port/pin not allowed. 355 Sdc.tcl:2095 '$args' ignored. 356 Sdc.tcl:2225 '$args' ignored. 357 Sdc.tcl:2272 virtual clock [get_name $clk] can not be propagated. 358 Sdc.tcl:2421 -multiply_by ignored. 359 Sdc.tcl:2424 -dont_scale ignored. 360 Sdc.tcl:2427 -no_design_rule ignored. 361 Sdc.tcl:2468 -clock not supported. 362 Sdc.tcl:2471 -clock_fall not supported. 363 Sdc.tcl:2517 -pin_load not allowed for net objects. 364 Sdc.tcl:2520 -wire_load not allowed for net objects. 365 Sdc.tcl:2523 -rise/-fall not allowed for net objects. 366 Sdc.tcl:2656 -data_path, -clock_path, -rise, -fall ignored for ports and designs. 367 Sdc.tcl:2726 derating factor greater than 2.0. 368 Sdc.tcl:2763 -cell_delay and -cell_check flags ignored for net objects. 369 Sdc.tcl:2822 no valid objects specified for $key. 370 Sdc.tcl:2855 no valid objects specified for $key 371 Sdc.tcl:3016 set_wire_load_min_block_size not supported. 372 NetworkEdit.tcl:80 connect_pins is deprecated. Use connect_pin. 400 Util.tcl:44 $cmd $key missing value. 401 Util.tcl:61 $cmd $key missing value. 402 Util.tcl:71 $cmd $arg is not a known keyword or flag. 403 Util.tcl:93 $cmd $arg is not a known keyword or flag. 404 Util.tcl:191 Usage: $cmd $cmd_args($cmd) 405 Util.tcl:193 Usage: $cmd argument error 406 Util.tcl:308 $cmd positional arguments not supported. 407 Util.tcl:314 $cmd requires one positional argument. 408 Util.tcl:321 $cmd requires zero or one positional arguments. 409 Util.tcl:327 $cmd requires two positional arguments. 410 Util.tcl:334 $cmd requires one or two positional arguments. 411 Util.tcl:340 $cmd requires three positional arguments. 412 Util.tcl:346 $cmd requires four positional arguments. 413 Util.tcl:354 $cmd_arg '$arg' is not a float. 414 Util.tcl:360 $cmd_arg '$arg' is not a positive float. 415 Util.tcl:366 $cmd_arg '$arg' is not an integer. 416 Util.tcl:372 $cmd_arg '$arg' is not a positive integer. 417 Util.tcl:378 $cmd_arg '$arg' is not an integer greater than or equal to one. 418 Util.tcl:384 $cmd_arg '$arg' is not between 0 and 100. 419 Sta.tcl:120 report_clock_skew -setup and -hold are mutually exclusive options. 420 Sta.tcl:195 $cmd -path_delay must be min, min_rise, min_fall, max, max_rise, max_fall or min_max. 421 Sta.tcl:205 $cmd command failed. 422 Sta.tcl:224 -endpoint_count must be a positive integer. 423 Sta.tcl:232 -group_count must be a positive integer. 424 Sta.tcl:263 '$arg' is not a known keyword or flag. 425 Sta.tcl:265 positional arguments not supported. 426 Sta.tcl:430 analysis type single is not consistent with doing both setup/max and hold/min checks. 427 Sta.tcl:435 positional arguments not supported. 428 Sta.tcl:864 set_assigned_transition transition is not a float. 429 Sdf.tcl:47 -analysis_type must be single, bc_wc or on_chip_variation 430 Sdf.tcl:60 -cond_use min_max cannot be used with analysis type single. 431 Sdf.tcl:108 $key must be sdf_min, sdf_typ, or sdf_max. 432 Sdf.tcl:210 SDF -divider must be / or . 433 Parasitics.tcl:46 path instance '$path' not found. 434 Parasitics.tcl:63 -reduce_to must be pi_elmore or pi_pole_residue2. 435 DelayCalc.tcl:120 delay calculator $alg not found. 436 Variables.tcl:45 sta_report_default_digits must be a positive integer. 437 Variables.tcl:70 sta_crpr_mode must be pin or transition. 438 Variables.tcl:187 $var_name value must be 0 or 1. 439 Cmds.tcl:117 unsupported object type $list_type. 440 Cmds.tcl:139 -from/-to arguments not supported with -of_objects. 441 Cmds.tcl:277 unsupported -filter expression. 442 Cmds.tcl:295 $cmd missing -from argument. 443 Cmds.tcl:300 $cmd missing -to argument. 444 Cmds.tcl:305 $cmd delay is not a float. 445 Cmds.tcl:310 set_annotated_delay -cell and -net options are mutually excluive. 446 Cmds.tcl:316 $cmd pin [get_full_name $pin] is not attached to instance [get_full_name $inst]. 447 Cmds.tcl:321 $cmd pin [get_full_name $pin] is not attached to instance [get_full_name $inst] 448 Cmds.tcl:326 $cmd -cell or -net required. 449 Cmds.tcl:384 $cmd missing -from argument. 450 Cmds.tcl:393 $cmd -clock must be rise or fall. 451 Cmds.tcl:400 $cmd missing -to argument. 452 Cmds.tcl:415 $cmd missing -setup|-hold|-recovery|-removal check type.. 453 Cmds.tcl:423 $cmd check_value is not a float. 454 Cmds.tcl:503 the -all and -name options are mutually exclusive. 455 Cmds.tcl:506 either -all or -name options must be specified. 456 Cmds.tcl:514 one of -logically_exclusive, -physically_exclusive or -asynchronous is required. 457 Cmds.tcl:517 the keywords -logically_exclusive, -physically_exclusive and -asynchronous are mutually exclusive. 458 Cmds.tcl:564 -source '[$pin path_name]' is not a clock pin. 459 Cmds.tcl:622 -from/-to must be used together. 460 Cmds.tcl:642 -rise, -fall options not allowed for single clock uncertainty. 461 Cmds.tcl:677 missing -from, -rise_from or -fall_from argument. 462 Cmds.tcl:689 missing -to, -rise_to or -fall_to argument. 463 Cmds.tcl:808 -from/-to hierarchical instance not supported. 464 Cmds.tcl:850 $cmd command failed. 465 Cmds.tcl:857 positional arguments not supported. 466 Cmds.tcl:861 -from, -through or -to required. 467 Cmds.tcl:980 unsupported object type $object_type. 468 Cmds.tcl:1271 $corner_name is not the name of process corner. 469 Cmds.tcl:1276 -corner keyword required with multi-corner analysis. 470 Cmds.tcl:1291 $corner_name is not the name of process corner. 471 Cmds.tcl:1296 missing -corner arg. 472 Cmds.tcl:1307 $corner_name is not the name of process corner. 473 Cmds.tcl:1323 $corner_name is not the name of process corner. 474 Cmds.tcl:1348 both -min and -max specified. 475 Cmds.tcl:1362 both -min and -max specified. 476 Cmds.tcl:1389 only one of -early and -late can be specified. 477 Cmds.tcl:1395 -early or -late must be specified. 478 Cmds.tcl:1402 both -early and -late specified. 479 Cmds.tcl:1417 $arg_name must be a single library. 480 Cmds.tcl:1423 $arg_name type '$object_type' is not a library. 481 Cmds.tcl:1428 library '$arg' not found. 482 Cmds.tcl:1445 $arg_name must be a single lib cell. 483 Cmds.tcl:1501 $arg_name must be a single instance. 484 Cmds.tcl:1507 $arg_name type '$object_type' is not an instance. 485 Cmds.tcl:1512 instance '$arg' not found. 486 Cmds.tcl:1531 $arg_name type '$object_type' is not an instance. 487 Cmds.tcl:1538 instance '$arg' not found. 488 Cmds.tcl:1599 $arg_name type '$object_type' is not a pin or port. 489 Cmds.tcl:1606 pin '$arg' not found. 490 Cmds.tcl:1626 $arg_name type '$object_type' is not a port. 491 Cmds.tcl:1830 $cmd object is null. 492 Cmds.tcl:1835 $cmd $type_key must be specified with object name argument. 493 Cmds.tcl:1878 get_property $object is not an object. 494 Cmds.tcl:1901 $object_type not supported. 495 Cmds.tcl:1904 $object_type '$object_name' not found. 496 Cmds.tcl:1978 Directory $spice_dir not found. 497 Cmds.tcl:1981 $spice_dir is not a directory. 498 Cmds.tcl:1984 Cannot write in $spice_dir. 499 Cmds.tcl:1987 No -spice_directory specified. 500 Cmds.tcl:1993 -lib_subckt_file $lib_subckt_file is not readable. 501 Cmds.tcl:1996 No -lib_subckt_file specified. 502 Cmds.tcl:2002 -model_file $model_file is not readable. 503 Cmds.tcl:2005 No -model_file specified. 504 Cmds.tcl:2011 No -power specified. 505 Cmds.tcl:2017 No -ground specified. 506 Cmds.tcl:2021 No -path_args specified. 507 Cmds.tcl:2026 No paths found for -path_args $path_args. 508 Search.tcl:146 -min and -max cannot both be specified. 509 Search.tcl:166 pin '$pin_arg' is hierarchical. 510 Search.tcl:232 -format $format not recognized. 511 Sdc.tcl:64 cannot open '$filename'. 512 Sdc.tcl:116 incomplete command at end of file. 513 Sdc.tcl:202 hierarchy separator must be one of '$sdc_dividers'. 514 Sdc.tcl:248 unknown unit $unit '$suffix'. 515 Sdc.tcl:321 unknown $unit unit '$suffix'. 516 Sdc.tcl:584 unsupported -filter expression. 517 Sdc.tcl:969 unsupported -filter expression. 518 Sdc.tcl:1045 unsupported -filter expression. 519 Sdc.tcl:1078 -add requires -name. 520 Sdc.tcl:1083 -name or port_pin_list must be specified. 521 Sdc.tcl:1091 missing -period argument. 522 Sdc.tcl:1097 -waveform edge_list must have an even number of edge times. 523 Sdc.tcl:1154 empty ports/pins/nets argument. 524 Sdc.tcl:1162 -add requires -name. 525 Sdc.tcl:1167 name or port_pin_list must be specified. 526 Sdc.tcl:1174 missing -source argument. 527 Sdc.tcl:1191 -master_clock argument empty. 528 Sdc.tcl:1194 -add requireds -master_clock. 529 Sdc.tcl:1198 -multiply_by and -divide_by options are exclusive. 530 Sdc.tcl:1202 -divide_by is not an integer greater than one. 531 Sdc.tcl:1205 -combinational implies -divide_by 1. 532 Sdc.tcl:1210 -multiply_by is not an integer greater than one. 533 Sdc.tcl:1216 -duty_cycle is not a float between 0 and 100. 534 Sdc.tcl:1222 -edges only supported for three edges. 535 Sdc.tcl:1228 edges times are not monotonically increasing. 536 Sdc.tcl:1237 -edge_shift length does not match -edges length. 537 Sdc.tcl:1243 missing -multiply_by, -divide_by, -combinational or -edges argument. 538 Sdc.tcl:1251 cannot specify -invert without -multiply_by, -divide_by or -combinational. 539 Sdc.tcl:1257 -duty_cycle requires -multiply_by value. 540 Sdc.tcl:1262 missing -pll_output argument. 541 Sdc.tcl:1265 missing -pll_feedback argument. 542 Sdc.tcl:1271 PLL output and feedback pins must be on the same instance. 543 Sdc.tcl:1274 source pin must be on the same instance as the PLL output pin. 544 Sdc.tcl:1277 PLL output must be one of the clock pins. 545 Sdc.tcl:1315 group_path command failed. 546 Sdc.tcl:1322 positional arguments not supported. 547 Sdc.tcl:1326 -from, -through or -to required. 548 Sdc.tcl:1332 -name and -default are mutually exclusive. 549 Sdc.tcl:1334 -name or -default option is required. 550 Sdc.tcl:1375 cannot specify both -high and -low. 551 Sdc.tcl:1383 missing -setup or -hold argument. 552 Sdc.tcl:1397 -high and -low only permitted for pins and instances. 553 Sdc.tcl:1404 -high and -low only permitted for pins and instances. 554 Sdc.tcl:1447 one of -logically_exclusive, -physically_exclusive or -asynchronous is required. 555 Sdc.tcl:1450 the keywords -logically_exclusive, -physically_exclusive and -asynchronous are mutually exclusive. 556 Sdc.tcl:1518 -source '[get_full_name $pin]' is not a clock pin. 557 Sdc.tcl:1525 -early/-late is only allowed with -source. 558 Sdc.tcl:1554 set_sense -type clock|data 559 Sdc.tcl:1623 transition time can not be specified for virtual clocks. 560 Sdc.tcl:1644 missing uncertainty value. 561 Sdc.tcl:1686 -from/-to must be used together. 562 Sdc.tcl:1706 -rise, -fall options not allowed for single clock uncertainty. 563 Sdc.tcl:1747 missing -from, -rise_from or -fall_from argument. 564 Sdc.tcl:1759 missing -to, -rise_to or -fall_to argument. 565 Sdc.tcl:1831 -from/-to hierarchical instance not supported. 566 Sdc.tcl:1863 pin '[get_full_name $inst]${hierarchy_separator}${port_name}' not found. 567 Sdc.tcl:1904 pin '[get_name $cell]${hierarchy_separator}${port_name}' not found. 568 Sdc.tcl:2089 missing delay argument. 569 Sdc.tcl:2220 missing path multiplier argument. 570 Sdc.tcl:2232 cannot use -start with -end. 571 Sdc.tcl:2300 value must be 0, zero, 1, one, rise, rising, fall, or falling. 572 Sdc.tcl:2358 cell '$lib_name:$cell_name' not found. 573 Sdc.tcl:2364 '$cell_name' not found. 574 Sdc.tcl:2368 missing -lib_cell argument. 575 Sdc.tcl:2376 port '$to_port_name' not found. 576 Sdc.tcl:2388 -pin argument required for cells with multiple outputs. 577 Sdc.tcl:2403 port '$from_port_name' not found. 578 Sdc.tcl:2610 port '[get_name $port]' is not an input. 579 Sdc.tcl:2972 operating condition '$op_cond_name' not found. 580 Sdc.tcl:2990 operating condition '$op_cond_name' not found. 581 Sdc.tcl:3004 -analysis_type must be single, bc_wc or on_chip_variation. 582 Sdc.tcl:3029 mode must be top, enclosed or segmented. 583 Sdc.tcl:3044 no wire load model specified. 584 Sdc.tcl:3105 wire load selection group '$selection_name' not found. 585 Sdc.tcl:3233 no default operating conditions found. 586 NetworkEdit.tcl:50 unsupported object type $object_type. 587 NetworkEdit.tcl:119 unsupported object type $object_type. 588 NetworkEdit.tcl:135 unsupported object type $object_type. 589 Network.tcl:25 unknown namespace $namespc. 590 Network.tcl:55 instance $instance_path not found. 591 Network.tcl:274 net $net_path not found. 592 Network.tcl:277 net $net_path not found. 593 Link.tcl:28 missing top_cell_name argument and no current_design. 594 DelayNormal1.cc:203 unknown early/late value. 595 DelayNormal2.cc:378 unknown early/late value. 596 Sim.cc:199 unknown function operator 597 EstimateParasitics.cc:188 load pin not leaf or top level 600 Sdc.tcl:1945 '$args' ignored. 601 Sdc.tcl:2444 set_fanout_load not supported. 602 Sdc.tcl:2904 no valid objects specified for $key. 603 NetworkEdit.tcl:172 disconnect_pins is deprecated. Use disconnect_pin. 604 Sdc.tcl:270 unknown $unit prefix '$prefix'. 605 Sdc.tcl:3066 wire load model '$model_name' not found. 606 Cmds.tcl:1875 get_property unsupported object type $object_type. 607 StaTcl.i unknown report path field %s 608 StaTcl.i unknown report path field %s