0100 CmdArgs.tcl:108           unsupported object type $object_type.
0101 CmdArgs.tcl:165           object '$obj' not found.
0102 CmdArgs.tcl:413           $corner_arg is not the name of process corner.
0103 CmdArgs.tcl:419           -corner keyword required with multi-corner analysis.
0104 CmdArgs.tcl:433           $corner_name is not the name of process corner.
0105 CmdArgs.tcl:438           missing -corner arg.
0106 CmdArgs.tcl:449           $corner_name is not the name of process corner.
0107 CmdArgs.tcl:466           $corner_name is not the name of process corner.
0108 CmdArgs.tcl:501           both -min and -max specified.
0109 CmdArgs.tcl:515           both -min and -max specified.
0110 CmdArgs.tcl:542           only one of -early and -late can be specified.
0111 CmdArgs.tcl:548           -early or -late must be specified.
0112 CmdArgs.tcl:555           both -early and -late specified.
0113 CmdArgs.tcl:570           $arg_name must be a single library.
0114 CmdArgs.tcl:576           $arg_name type '$object_type' is not a library.
0115 CmdArgs.tcl:581           library '$arg' not found.
0116 CmdArgs.tcl:598           $arg_name must be a single lib cell.
0123 CmdArgs.tcl:685           $arg_name must be a single instance.
0124 CmdArgs.tcl:691           $arg_name type '$object_type' is not an instance.
0125 CmdArgs.tcl:696           instance '$arg' not found.
0126 CmdArgs.tcl:715           $arg_name type '$object_type' is not an instance.
0127 CmdArgs.tcl:722           instance '$arg' not found.
0131 CmdArgs.tcl:783           $arg_name type '$object_type' is not a pin or port.
0132 CmdArgs.tcl:790           pin '$arg' not found.
0133 CmdArgs.tcl:810           $arg_name type '$object_type' is not a port.
0139 CmdArgs.tcl:891           unsupported object type $object_type.
0141 CmdArgs.tcl:912           $arg_name '$object_type' is not a net.
0142 CmdArgs.tcl:936           unsupported object type $object_type.
0143 CmdArgs.tcl:917           $arg_name '$arg' not found.
0144 CmdArgs.tcl:408           corner object type '$object_type' is not a corner.
0160 CmdUtil.tcl:44            no commands match '$pattern'.
0161 CmdUtil.tcl:89            Usage: $cmd $cmd_args($cmd)
0162 CmdUtil.tcl:91            Usage: $cmd argument error
0164 CmdUtil.tcl:220           unsupported object type $list_type.
0165 CmdUtil.tcl:237           unknown namespace $namespc.
0166 CmdUtil.tcl:170           unknown unit $unit prefix '${arg_prefix}'.
0167 CmdUtil.tcl:173           incorrect unit suffix '$arg_suffix'.
0180 DelayCalc.tcl:126         delay calculator $alg not found.
0181 DelayCalc.tcl:151         set_assigned_delay missing -from argument.
0182 DelayCalc.tcl:156         set_assigned_delay missing -to argument.
0183 DelayCalc.tcl:161         set_assigned_delay delay is not a float.
0184 DelayCalc.tcl:166         set_annotated_delay -cell and -net options are mutually excluive.
0185 DelayCalc.tcl:172         set_assigned_delay pin [get_full_name $pin] is not attached to instance [get_full_name $inst].
0186 DelayCalc.tcl:177         set_assigned_delay pin [get_full_name $pin] is not attached to instance [get_full_name $inst]
0187 DelayCalc.tcl:182         set_assigned_delay -cell or -net required.
0188 DelayCalc.tcl:247         set_assigned_check missing -from argument.
0189 DelayCalc.tcl:256         set_assigned_check -clock must be rise or fall.
0190 DelayCalc.tcl:263         set_assigned_check missing -to argument.
0191 DelayCalc.tcl:278         set_assigned_check missing -setup|-hold|-recovery|-removal check type..
0192 DelayCalc.tcl:286         set_assigned_check check_value is not a float.
0193 DelayCalc.tcl:226         set_assigned_delay no timing arcs found between from/to pins.
0194 DelayCalc.tcl:338         set_assigned_check no check arcs found between from/to pins.
0204 ArnoldiDelayCalc.cc:607   arnoldi delay calc failed.
0210 DelayCalc.tcl:359         set_assigned_transition transition is not a float.
0220 Link.tcl:36               missing top_cell_name argument and no current_design.
0225 InternalPower.cc:192      unsupported table order
0226 InternalPower.cc:207      unsupported table axes
0230 Network.tcl:41            instance $instance_path not found.
0231 Network.tcl:217           net $net_path not found.
0232 Network.tcl:220           net $net_path not found.
0233 Network.tcl:30            report_instance -connections is deprecated.
0234 Network.tcl:34            report_instance -verbose is deprecated.
0235 Network.tcl:189           report_net -connections is deprecated.
0236 Network.tcl:193           report_net -verbose is deprecated.
0237 Network.tcl:197           report_net -hier_pins is deprecated.
0239 TableModel.cc:265         unsupported table order
0240 TableModel.cc:328         unsupported table axes
0241 TableModel.cc:545         unsupported table order
0242 TableModel.cc:563         unsupported table axes
0243 TimingArc.cc:242          timing arc max index exceeded

0244 Clock.cc:474              generated clock edges size is not three.
0245 CheckTiming.cc:428        unknown print flag
0246 Corner.cc:377             unknown parasitic analysis point count
0247 Corner.cc:421             unknown analysis point count
0248 Crpr.cc:73                missing prev paths
0249 GatedClk.cc:247           illegal gated clock active value
0250 NetworkEdit.tcl:107       unsupported object type $object_type.
0252 NetworkEdit.tcl:174       unsupported object type $object_type.
0253 NetworkEdit.tcl:192       unsupported object type $object_type.
0266 VertexVisitor.cc:32       VertexPinCollector::copy not supported.
0267 WriteSpice.cc:1217        out of memory
0268 VerilogWriter.cc:258      unknown port direction
0272 Parasitics.tcl:41         read_spef -quiet is deprecated.
0273 Parasitics.tcl:45         read_spef -reduce_to is deprecated. Use -reduce instead.
0274 Parasitics.tcl:50         read_spef -delete_after_reduce is deprecated.
0275 Parasitics.tcl:54         read_spef -save is deprecated.
0276 Parasitics.tcl:62         path instance '$path' not found.
0280 PathEnum.cc:572           diversion path not found
0301 Power.tcl:234             activity should be 0.0 to 1.0 or 2.0
0302 Power.tcl:242             duty should be 0.0 to 1.0
0303 Power.tcl:257             activity cannot be set on clock ports.
0304 Power.tcl:40              No liberty libraries have been read.
0305 Power.tcl:286             read_power_activities is deprecated. Use read_vcd.
0320 Property.tcl:32           $cmd object is null.
0321 Property.tcl:37           $cmd $type_key must be specified with object name argument.
0322 Property.tcl:77           get_property unsupported object type $object_type.
0323 Property.tcl:80           get_property $object is not an object.
0324 Property.tcl:107          $object_type not supported.
0325 Property.tcl:110          $object_type '$object_name' not found.
0326 Sdc.tcl:494               object '$pattern' is not an instance.
0327 Sdc.tcl:542               object '$pattern' is not an clock.
0328 Sdc.tcl:606               object '$pattern' is not a liberty cell.
0329 Sdc.tcl:678               object '$pattern' is not a liberty pin.
0330 Sdc.tcl:757               object '$pattern' is not a liberty library.
0331 Sdc.tcl:856               object '$pattern' is not a net.
0332 Sdc.tcl:936               object '$pattern' is not a pin.
0333 Sdc.tcl:993               object '$pattern' is not a port.
0334 Sdc.tcl:2848              object '$cell_name' is not a liberty cell.
0340 Sdc.tcl:73                cannot open '$filename'.
0341 Sdc.tcl:128               incomplete command at end of file.
0342 Sdc.tcl:212               hierarchy separator must be one of '$sdc_dividers'.
0343 Sdc.tcl:256               unknown unit $unit prefix '${arg_prefix}'.
0344 Sdc.tcl:275               unknown $unit prefix '$prefix'.
0345 Sdc.tcl:281               $unit scale [format %.0e $scale] does not match library scale [format %.0e $unit_scale].
0346 Sdc.tcl:358               only one of -cells, -data_pins, -clock_pins, -async_pins, -output_pins are suppported.
0347 Sdc.tcl:401               current_design for other than top cell not supported.
0348 Sdc.tcl:468               patterns argument not supported with -of_objects.
0349 Sdc.tcl:507               instance '$pattern' not found.
0350 Sdc.tcl:429               unsupported $object_type -filter expression.
0351 Sdc.tcl:551               clock '$pattern' not found.
0352 Sdc.tcl:581               positional arguments not supported with -of_objects.
0353 Sdc.tcl:618               library '$lib_name' not found.
0354 Sdc.tcl:630               cell '$cell_pattern' not found.
0355 Sdc.tcl:691               library/cell/port '$pattern' not found.
0356 Sdc.tcl:711               port '$port_pattern' not found.
0357 Sdc.tcl:716               library '$lib_name' not found.
0358 Sdc.tcl:730               -nocase ignored without -regexp.
0359 Sdc.tcl:766               library '$pattern' not found.
0360 Sdc.tcl:837               patterns argument not supported with -of_objects.
0361 Sdc.tcl:867               net '$pattern' not found.
0362 Sdc.tcl:900               patterns argument not supported with -of_objects.
0363 Sdc.tcl:947               pin '$pattern' not found.
0365 Sdc.tcl:982               patterns argument not supported with -of_objects.
0366 Sdc.tcl:1002              port '$pattern' not found.
0368 Sdc.tcl:1042              -add requires -name.
0369 Sdc.tcl:1047              -name or port_pin_list must be specified.
0370 Sdc.tcl:1055              missing -period argument.
0371 Sdc.tcl:1061              -waveform edge_list must have an even number of edge times.
0372 Sdc.tcl:1070              non-increasing clock -waveform edge times.
0373 Sdc.tcl:1073              -waveform time greater than two periods.
0374 Sdc.tcl:1131              empty ports/pins/nets argument.
0375 Sdc.tcl:1139              -add requires -name.
0376 Sdc.tcl:1144              name or port_pin_list must be specified.
0377 Sdc.tcl:1151              missing -source argument.
0378 Sdc.tcl:1166              -master_clock argument empty.
0379 Sdc.tcl:1169              -add requireds -master_clock.
0380 Sdc.tcl:1173              -multiply_by and -divide_by options are exclusive.
0381 Sdc.tcl:1177              -divide_by is not an integer greater than one.
0382 Sdc.tcl:1180              -combinational implies -divide_by 1.
0383 Sdc.tcl:1185              -multiply_by is not an integer greater than one.
0384 Sdc.tcl:1191              -duty_cycle is not a float between 0 and 100.
0385 Sdc.tcl:1197              -edges only supported for three edges.
0386 Sdc.tcl:1203              edges times are not monotonically increasing.
0387 Sdc.tcl:1212              -edge_shift length does not match -edges length.
0388 Sdc.tcl:1218              missing -multiply_by, -divide_by, -combinational or -edges argument.
0389 Sdc.tcl:1226              cannot specify -invert without -multiply_by, -divide_by or -combinational.
0390 Sdc.tcl:1232              -duty_cycle requires -multiply_by value.
0391 Sdc.tcl:1292              group_path command failed.
0392 Sdc.tcl:1299              positional arguments not supported.
0393 Sdc.tcl:1303              -from, -through or -to required.
0394 Sdc.tcl:1309              -name and -default are mutually exclusive.
0395 Sdc.tcl:1311              -name or -default option is required.
0396 Sdc.tcl:1352              cannot specify both -high and -low.
0397 Sdc.tcl:1360              missing -setup or -hold argument.
0398 Sdc.tcl:1374              -high and -low only permitted for pins and instances.
0399 Sdc.tcl:1381              -high and -low only permitted for pins and instances.
0400 Sdc.tcl:1424              one of -logically_exclusive, -physically_exclusive or -asynchronous is required.
0401 Sdc.tcl:1427              the keywords -logically_exclusive, -physically_exclusive and -asynchronous are mutually exclusive.
0402 Sdc.tcl:1446              unknown keyword argument $arg.
0403 Sdc.tcl:1448              extra positional argument $arg.
0404 Sdc.tcl:1477              the -all and -name options are mutually exclusive.
0405 Sdc.tcl:1480              either -all or -name options must be specified.
0406 Sdc.tcl:1488              one of -logically_exclusive, -physically_exclusive or -asynchronous is required.
0407 Sdc.tcl:1491              the keywords -logically_exclusive, -physically_exclusive and -asynchronous are mutually exclusive.
0408 Sdc.tcl:1541              -clock ignored for clock objects.
0409 Sdc.tcl:1555              -source '[get_full_name $pin]' is not a clock pin.
0410 Sdc.tcl:1562              -early/-late is only allowed with -source.
0411 Sdc.tcl:1591              -clock ignored for clock objects.
0412 Sdc.tcl:1603              -source '[$pin path_name]' is not a clock pin.
0413 Sdc.tcl:1631              set_sense -type data not supported.
0414 Sdc.tcl:1635              set_sense -type clock|data
0415 Sdc.tcl:1646              set_clock_sense is deprecated as of SDC 2.1. Use set_sense -type clock.
0416 Sdc.tcl:1658              -pulse argument not supported.
0417 Sdc.tcl:1667              -positive, -negative, -stop_propagation and -pulse are mutually exclusive.
0418 Sdc.tcl:1680              hierarchical pin '[get_full_name $pin]' not supported.
0419 Sdc.tcl:1704              transition time can not be specified for virtual clocks.
0420 Sdc.tcl:1737              missing uncertainty value.
0421 Sdc.tcl:1785              -from/-to must be used together.
0422 Sdc.tcl:1805              -rise, -fall options not allowed for single clock uncertainty.
0423 Sdc.tcl:1871              -from/-to must be used together.
0424 Sdc.tcl:1891              -rise, -fall options not allowed for single clock uncertainty.
0425 Sdc.tcl:1932              missing -from, -rise_from or -fall_from argument.
0426 Sdc.tcl:1944              missing -to, -rise_to or -fall_to argument.
0427 Sdc.tcl:1992              missing -from, -rise_from or -fall_from argument.
0428 Sdc.tcl:2004              missing -to, -rise_to or -fall_to argument.
0429 Sdc.tcl:2046              -from/-to keywords ignored for lib_pin, port and pin arguments.
0430 Sdc.tcl:2076              -from/-to hierarchical instance not supported.
0431 Sdc.tcl:2108              pin '[get_full_name $inst]${hierarchy_separator}${port_name}' not found.
0432 Sdc.tcl:2165              pin '[get_name $cell]${hierarchy_separator}${port_name}' not found.
0434 Sdc.tcl:2199              -from/-to keywords ignored for lib_pin, port and pin arguments.
0435 Sdc.tcl:2251              -from/-to hierarchical instance not supported.
0436 Sdc.tcl:2305              '$args' ignored.
0437 Sdc.tcl:2309              -from, -through or -to required.
0438 Sdc.tcl:2388              -source_latency_included ignored with -reference_pin.
0439 Sdc.tcl:2391              -network_latency_included ignored with -reference_pin.
0440 Sdc.tcl:2410              $cmd not allowed on [pin_direction $pin] port '[get_full_name $pin]'.
0441 Sdc.tcl:2412              $cmd relative to a clock defined on the same port/pin not allowed.
0442 Sdc.tcl:2460              missing delay argument.
0443 Sdc.tcl:2466              '$args' ignored.
0444 Sdc.tcl:2591              missing path multiplier argument.
0445 Sdc.tcl:2596              '$args' ignored.
0446 Sdc.tcl:2603              cannot use -start with -end.
0447 Sdc.tcl:2653              $cmd command failed.
0448 Sdc.tcl:2660              positional arguments not supported.
0449 Sdc.tcl:2664              -from, -through or -to required.
0450 Sdc.tcl:2731              virtual clock [get_name $clk] can not be propagated.
0451 Sdc.tcl:2773              value must be 0, zero, 1, one, rise, rising, fall, or falling.
0452 Sdc.tcl:2842              cell '$lib_name:$cell_name' not found.
0453 Sdc.tcl:2855              '$cell_name' not found.
0454 Sdc.tcl:2859              missing -lib_cell argument.
0455 Sdc.tcl:2867              port '$to_port_name' not found.
0456 Sdc.tcl:2879              -pin argument required for cells with multiple outputs.
0457 Sdc.tcl:2894              port '$from_port_name' not found.
0458 Sdc.tcl:2912              -multiply_by ignored.
0459 Sdc.tcl:2915              -dont_scale ignored.
0460 Sdc.tcl:2918              -no_design_rule ignored.
0461 Sdc.tcl:2941              set_fanout_load not supported.
0462 Sdc.tcl:2965              -clock not supported.
0463 Sdc.tcl:2968              -clock_fall not supported.
0464 Sdc.tcl:3018              -pin_load not allowed for net objects.
0465 Sdc.tcl:3021              -wire_load not allowed for net objects.
0466 Sdc.tcl:3024              -rise/-fall not allowed for net objects.
0467 Sdc.tcl:3111              port '[get_name $port]' is not an input.
0468 Sdc.tcl:3157              -data_path, -clock_path, -rise, -fall ignored for ports and designs.
0469 Sdc.tcl:3228              derating factor greater than 2.0.
0470 Sdc.tcl:3265              -cell_delay and -cell_check flags ignored for net objects.
0471 Sdc.tcl:3335              no valid objects specified for $key.
0472 Sdc.tcl:3368              no valid objects specified for $key
0473 Sdc.tcl:3417              no valid objects specified for $key.
0474 Sdc.tcl:3485              operating condition '$op_cond_name' not found.
0475 Sdc.tcl:3503              operating condition '$op_cond_name' not found.
0476 Sdc.tcl:3517              -analysis_type must be single, bc_wc or on_chip_variation.
0477 Sdc.tcl:3529              set_wire_load_min_block_size not supported.
0478 Sdc.tcl:3542              mode must be top, enclosed or segmented.
0479 Sdc.tcl:3557              no wire load model specified.
0480 Sdc.tcl:3579              wire load model '$model_name' not found.
0481 Sdc.tcl:3618              wire load selection group '$selection_name' not found.
0482 Sdc.tcl:3706              define_corners must be called before read_liberty.
0500 Sdc.tcl:3779              no default operating conditions found.
0501 Sdc.tcl:259               incorrect unit suffix '$arg_suffix'.
0510 Search.tcl:136            $cmd -path_delay must be min, min_rise, min_fall, max, max_rise, max_fall or min_max.
0511 Search.tcl:146            $cmd command failed.
0512 Search.tcl:165            -endpoint_count must be a positive integer.
0513 Search.tcl:174            -group_count must be >= 1.
0514 Search.tcl:205            '$arg' is not a known keyword or flag.
0515 Search.tcl:207            positional arguments not supported.
0516 Search.tcl:328            report_clock_skew -setup and -hold are mutually exclusive options.
0520 Search.tcl:532            analysis type single is not consistent with doing both setup/max and hold/min checks.
0521 Search.tcl:537            positional arguments not supported.
0522 Search.tcl:791            -min and -max cannot both be specified.
0523 Search.tcl:811            pin '$pin_arg' is hierarchical.
0524 Search.tcl:867            -format $format not recognized.
0526 Search.tcl:1015           specify one of -setup and -hold.
0527 Search.tcl:1065           unknown path group '$name'.
0540 Sta.tcl:158               -from/-to arguments not supported with -of_objects.
0560 Util.tcl:44               $cmd $key missing value.
0561 Util.tcl:61               $cmd $key missing value.
0562 Util.tcl:71               $cmd $arg is not a known keyword or flag.
0563 Util.tcl:93               $cmd $arg is not a known keyword or flag.
0564 Util.tcl:241              $cmd positional arguments not supported.
0565 Util.tcl:247              $cmd requires one positional argument.
0566 Util.tcl:254              $cmd requires zero or one positional arguments.
0567 Util.tcl:260              $cmd requires two positional arguments.
0568 Util.tcl:267              $cmd requires one or two positional arguments.
0569 Util.tcl:273              $cmd requires three positional arguments.
0570 Util.tcl:279              $cmd requires four positional arguments.
0571 Util.tcl:287              $cmd_arg '$arg' is not a float.
0572 Util.tcl:293              $cmd_arg '$arg' is not a positive float.
0573 Util.tcl:299              $cmd_arg '$arg' is not an integer.
0574 Util.tcl:305              $cmd_arg '$arg' is not a positive integer.
0575 Util.tcl:311              $cmd_arg '$arg' is not an integer greater than or equal to one.
0576 Util.tcl:317              $cmd_arg '$arg' is not between 0 and 100.
0577 Sdc.tcl:3709              define_corners must define at least one corner.
0590 Variables.tcl:37          sta_report_default_digits must be a positive integer.
0591 Variables.tcl:62          sta_crpr_mode must be pin or transition.
0592 Variables.tcl:179         $var_name value must be 0 or 1.
0616 Levelize.cc:220           maximum logic level exceeded
0620 Sdf.tcl:41                -cond_use must be min, max or min_max.
0621 Sdf.tcl:46                -cond_use min_max cannot be used with analysis type single.
0623 Sdf.tcl:154               SDF -divider must be / or .
0800 VcdReader.cc:110          unhandled vcd command.
0801 VcdReader.cc:148          timescale syntax error.
0802 VcdReader.cc:162          Unknown timescale unit.
0804 VcdReader.cc:219          Variable syntax error.
1000 ConcreteNetwork.cc:1973   cell type %s can not be linked.
1010 CycleAccting.cc:87        No common period was found between clocks %s and %s.
1040 DmpCeff.cc:1510           parasitic Pi model has NaNs.
1041 DmpCeff.cc:1536           cell %s delay model not supported on SPF parasitics by DMP delay calculator
1060 Genclks.cc:275            no master clock found for generated clock %s.
1062 Genclks.cc:939            generated clock %s source pin %s missing paths from master clock %s.
1100 Power.cc:556              unknown cudd constant
1110 Liberty.cc:763            cell %s/%s port %s not found in cell %s/%s.
1111 Liberty.cc:789            cell %s/%s %s -> %s timing group %s not found in cell %s/%s.
1112 Liberty.cc:808            Liberty cell %s/%s for corner %s/%s not found.
1113 Liberty.cc:1824           cell %s/%s %s -> %s latch enable %s_edge is inconsistent with %s -> %s setup_%s check.
1114 Liberty.cc:1765           cell %s/%s %s -> %s latch enable %s_edge is inconsistent with latch group enable function positive sense.
1115 Liberty.cc:1773           cell %s/%s %s -> %s latch enable %s_edge is inconsistent with latch group enable function negative sense.
1116 Liberty.cc:362            unsupported slew degradation table axes
1117 Liberty.cc:378            unsupported slew degradation table axes
1118 Liberty.cc:383            unsupported slew degradation table order
1119 Liberty.cc:413            unsupported slew degradation table axes
1120 Liberty.cc:1979           library missing vdd
1121 Liberty.cc:1391           timing arc count mismatch
1125 LibertyParser.cc:310      valueIterator called for LibertySimpleAttribute
1126 LibertyParser.cc:390      LibertyStringAttrValue called for float value
1127 LibertyParser.cc:420      LibertyStringAttrValue called for float value
1130 LibertyExpr.cc:82         %s references unknown port %s.
1131 LibertyExpr.cc:175        %s %s.
1140 LibertyReader.cc:626      library %s already exists.
1141 LibertyReader.cc:660      library missing name.
1142 LibertyReader.cc:686      default_wire_load %s not found.
1143 LibertyReader.cc:697      default_wire_selection %s not found.
1144 LibertyReader.cc:709      default_operating_condition %s not found.
1145 LibertyReader.cc:719      input_threshold_pct_%s not found.
1146 LibertyReader.cc:723      output_threshold_pct_%s not found.
1147 LibertyReader.cc:727      slew_lower_threshold_pct_%s not found.
1148 LibertyReader.cc:731      slew_upper_threshold_pct_%s not found.
1149 LibertyReader.cc:736      Library %s is missing one or more thresholds.
1150 LibertyReader.cc:815      unknown unit multiplier %s.
1151 LibertyReader.cc:838      unknown unit scale %c.
1152 LibertyReader.cc:841      unknown unit suffix %s.
1153 LibertyReader.cc:844      unknown unit suffix %s.
1154 LibertyReader.cc:869      capacitive_load_units are not ff or pf.
1155 LibertyReader.cc:872      capacitive_load_units are not a string.
1156 LibertyReader.cc:875      capacitive_load_units missing suffix.
1157 LibertyReader.cc:878      capacitive_load_units scale is not a float.
1158 LibertyReader.cc:881      capacitive_load_units missing scale and suffix.
1159 LibertyReader.cc:884      capacitive_load_unit missing values suffix.
1160 LibertyReader.cc:902      delay_model %s not supported.
1161 LibertyReader.cc:906      delay_model %s not supported.
1162 LibertyReader.cc:910      delay_model %s not supported.
1163 LibertyReader.cc:915      delay_model %s not supported..
1164 LibertyReader.cc:918      unknown delay_model %s.
1165 LibertyReader.cc:937      unknown bus_naming_style format.
1166 LibertyReader.cc:958      voltage_map voltage is not a float.
1167 LibertyReader.cc:961      voltage_map missing voltage.
1168 LibertyReader.cc:964      voltage_map supply name is not a string.
1169 LibertyReader.cc:967      voltage_map missing supply name and voltage.
1170 LibertyReader.cc:970      voltage_map missing values suffix.
1171 LibertyReader.cc:1055     default_max_transition is 0.0.
1172 LibertyReader.cc:1070     default_max_fanout is 0.0.
1173 LibertyReader.cc:1160     default_fanout_load is 0.0.
1174 LibertyReader.cc:1188     default_wire_load_mode %s not found.
1175 LibertyReader.cc:1359     table template missing name.
1176 LibertyReader.cc:1404     missing variable_%d attribute.
1177 LibertyReader.cc:1480     missing table index values.
1178 LibertyReader.cc:1486     non-increasing table index values.
1179 LibertyReader.cc:1518     bus type %s missing bit_from.
1180 LibertyReader.cc:1520     bus type %s missing bit_to.
1181 LibertyReader.cc:1524     type missing name.
1182 LibertyReader.cc:1551     scaling_factors do not have a name.
1183 LibertyReader.cc:1720     operating_conditions missing name.
1184 LibertyReader.cc:1791     wire_load missing name.
1185 LibertyReader.cc:1834     fanout_length is missing length and fanout.
1186 LibertyReader.cc:1849     wire_load_selection missing name.
1187 LibertyReader.cc:1880     wireload %s not found.
1189 LibertyReader.cc:1887     wire_load_from_area min not a float.
1190 LibertyReader.cc:1890     wire_load_from_area max not a float.
1191 LibertyReader.cc:1893     wire_load_from_area missing parameters.
1192 LibertyReader.cc:1896     wire_load_from_area missing parameters.
1193 LibertyReader.cc:1915     cell missing name.
1194 LibertyReader.cc:1939     cell %s ocv_derate_group %s not found.
1195 LibertyReader.cc:1972     port %s function size does not match port size.
1196 LibertyReader.cc:2069     %s %s bus width mismatch.
1197 LibertyReader.cc:2080     %s %s bus width mismatch.
1198 LibertyReader.cc:2090     clear
1199 LibertyReader.cc:2100     preset
1200 LibertyReader.cc:2136     latch enable function is non-unate for port %s.
1201 LibertyReader.cc:2141     latch enable function is unknown for port %s.
1202 LibertyReader.cc:2243     operating conditions %s not found.
1203 LibertyReader.cc:2246     scaled_cell missing operating condition.
1204 LibertyReader.cc:2249     scaled_cell cell %s has not been defined.
1205 LibertyReader.cc:2252     scaled_cell missing name.
1206 LibertyReader.cc:2278     scaled_cell %s, %s port functions do not match cell port functions.
1207 LibertyReader.cc:2283     scaled_cell ports do not match cell ports.
1208 LibertyReader.cc:2285     scaled_cell %s, %s timing does not match cell timing.
1209 LibertyReader.cc:2304     combinational timing to an input port.
1210 LibertyReader.cc:2399     missing %s_transition.
1211 LibertyReader.cc:2401     missing cell_%s.
1212 LibertyReader.cc:2422     timing group from output port.
1213 LibertyReader.cc:2432     timing group from output port.
1214 LibertyReader.cc:2442     timing group from output port.
1215 LibertyReader.cc:2477     timing group from output port.
1217 LibertyReader.cc:2487     timing group from output port.
1218 LibertyReader.cc:2588     receiver_capacitance group not in timing or pin group.
1219 LibertyReader.cc:2606     unsupported model axis.
1220 LibertyReader.cc:2634     output_current_%s group not in timing group.
1221 LibertyReader.cc:2676     output current waveform %.2e %.2e not found.
1222 LibertyReader.cc:2697     unsupported model axis.
1223 LibertyReader.cc:2739     vector index_1 and index_2 must have exactly one value.
1224 LibertyReader.cc:2741     vector reference_time not found.
1225 LibertyReader.cc:2774     normalized_driver_waveform variable_2 must be normalized_voltage
1226 LibertyReader.cc:2777     normalized_driver_waveform variable_1 must be input_net_transition
1228 LibertyReader.cc:2999     level_shifter_type must be HL, LH, or HL_LH
1229 LibertyReader.cc:3035     switch_cell_type must be coarse_grain or fine_grain
1230 LibertyReader.cc:3059     scaling_factors %s not found.
1231 LibertyReader.cc:3120     pin name is not a string.
1232 LibertyReader.cc:3137     pin name is not a string.
1233 LibertyReader.cc:3151     pin name is not a string.
1234 LibertyReader.cc:3229     bus %s bus_type not found.
1235 LibertyReader.cc:3281     bus_type %s not found.
1236 LibertyReader.cc:3284     bus_type is not a string.
1237 LibertyReader.cc:3302     bundle %s member not found.
1238 LibertyReader.cc:3325     member is not a string.
1239 LibertyReader.cc:3332     members attribute is missing values.
1240 LibertyReader.cc:3383     unknown port direction.
1241 LibertyReader.cc:3630     max_transition is 0.0.
1242 LibertyReader.cc:3736     pulse_latch unknown pulse type.
1243 LibertyReader.cc:4155     timing group missing related_pin/related_bus_pin.
1244 LibertyReader.cc:4254     unknown timing_type %s.
1245 LibertyReader.cc:4274     unknown timing_sense %s.
1246 LibertyReader.cc:4314     mode value is not a string.
1247 LibertyReader.cc:4317     missing mode value.
1248 LibertyReader.cc:4320     mode name is not a string.
1249 LibertyReader.cc:4323     mode missing values.
1250 LibertyReader.cc:4326     mode missing mode name and value.
1251 LibertyReader.cc:4402     unsupported model axis.
1252 LibertyReader.cc:4429     unsupported model axis.
1253 LibertyReader.cc:4458     unsupported model axis.
1254 LibertyReader.cc:4493     unsupported model axis.
1255 LibertyReader.cc:4509     %s group not in timing group.
1256 LibertyReader.cc:4548     table template %s not found.
1257 LibertyReader.cc:4632     %s is missing values.
1258 LibertyReader.cc:4655     %s is not a list of floats.
1259 LibertyReader.cc:4657     table row has %u columns but axis has %d.
1260 LibertyReader.cc:4667     table has %u rows but axis has %d.
1261 LibertyReader.cc:4718     lut output is not a string.
1262 LibertyReader.cc:4734     cell %s test_cell redefinition.
1263 LibertyReader.cc:4773     mode definition missing name.
1264 LibertyReader.cc:4790     mode value missing name.
1265 LibertyReader.cc:4804     when attribute inside table model.
1266 LibertyReader.cc:4853     %s attribute is not a string.
1267 LibertyReader.cc:4856     %s is not a simple attribute.
1268 LibertyReader.cc:4876     %s attribute is not an integer.
1269 LibertyReader.cc:4879     %s is not a simple attribute.
1270 LibertyReader.cc:4892     %s is not a simple attribute.
1271 LibertyReader.cc:4918     %s value %s is not a float.
1272 LibertyReader.cc:4947     %s missing values.
1273 LibertyReader.cc:4951     %s missing values.
1274 LibertyReader.cc:4954     %s is not a complex attribute.
1275 LibertyReader.cc:4980     %s is not a float.
1276 LibertyReader.cc:5003     %s is missing values.
1277 LibertyReader.cc:5006     %s has more than one string.
1278 LibertyReader.cc:5015     %s is missing values.
1279 LibertyReader.cc:5040     %s attribute is not boolean.
1280 LibertyReader.cc:5043     %s attribute is not boolean.
1281 LibertyReader.cc:5046     %s is not a simple attribute.
1282 LibertyReader.cc:5062     attribute %s value %s not recognized.
1283 LibertyReader.cc:5093     unknown early/late value.
1284 LibertyReader.cc:5313     OCV derate group named %s not found.
1285 LibertyReader.cc:5329     ocv_derate missing name.
1286 LibertyReader.cc:5382     unknown rise/fall.
1287 LibertyReader.cc:5402     unknown derate type.
1288 LibertyReader.cc:5434     unsupported model axis.
1289 LibertyReader.cc:5466     unsupported model axis.
1290 LibertyReader.cc:5498     unsupported model axis.
1291 LibertyReader.cc:5569     unknown pg_type.
1292 LibertyReader.cc:5983     port %s subscript out of range.
1293 LibertyReader.cc:5987     port range %s of non-bus port %s.
1294 LibertyReader.cc:6001     port %s not found.
1295 LibertyReader.cc:6071     port %s not found.
1297 LibertyReader.cc:1446     axis type %s not supported.
1298 LibertyReader.cc:2160     statetable input port %s not found.
1299 LibertyReader.cc:3785     unknown signal_type %s.
1300 LibertyReader.cc:4029     table row must have 3 groups separated by ':'.
1301 LibertyReader.cc:4034     table row has %zu input values but %zu are required.
1302 LibertyReader.cc:4041     table row has %zu current values but %zu are required.
1303 LibertyReader.cc:4048     table row has %zu next values but %zu are required.
1304 LibertyReader.cc:4094     table input value '%s' not recognized.
1305 LibertyReader.cc:4113     table internal value '%s' not recognized.
1340 LibertyWriter.cc:307      %s/%s bundled ports not supported.
1341 LibertyWriter.cc:455      %s/%s/%s timing model not supported.
1342 LibertyWriter.cc:475      3 axis table models not supported.
1343 LibertyWriter.cc:624      %s/%s/%s timing arc type %s not supported.
1350 LumpedCapDelayCalc.cc:138 gate delay input variable is NaN
1355 MakeTimingModel.cc:227    clock %s pin %s is inside model block.
1360 Vcd.cc:172                Unknown variable %s ID %s
1370 PathEnum.cc:476           path diversion missing edge.
1398 VerilogReader.cc:1860     %s is not a verilog module.
1399 VerilogReader.cc:1865     %s is not a verilog module.
1400 PathVertex.cc:236         missing arrivals.
1401 PathVertex.cc:250         missing arrivals.
1402 PathVertex.cc:279         missing requireds.
1422 PathVertexRep.cc:153      missing arrivals.
1450 ReadVcdActivities.cc:107  VCD max time is zero.
1451 ReadVcdActivities.cc:174  problem parsing bus %s.
1452 ReadVcdActivities.cc:250  clock %s vcd period %s differs from SDC clock period %s
1521 Sim.cc:511                propagated logic value %c differs from constraint value of %c on pin %s.
1525 SpefParse.yy:805          %d is not positive.
1526 SpefParse.yy:814          %.4f is not positive.
1527 SpefParse.yy:820          %.4f is not positive.
1550 Sta.cc:1999               '%s' is not a valid start point.
1551 Sta.cc:2072               '%s' is not a valid endpoint.
1552 Sta.cc:2075               '%s' is not a valid endpoint.
1553 Sta.cc:2391               maximum corner count exceeded
1554 Sta.cc:1996               '%s' is not a valid start point.
1570 Search.i:54               no network has been linked.
1571 Search.i:68               network does not support edits.
1574 Search.i:1120             POCV support requires compilation with SSTA=1.
1575 Search.i:529              unknown report path field %s
1576 Search.i:541              unknown report path field %s
1600 WritePathSpice.cc:165     No liberty libraries found,
1602 WriteSpice.cc:458         Liberty pg_port %s/%s missing voltage_name attribute,
1603 WriteSpice.cc:428         %s pg_port %s not found,
1604 WriteSpice.cc:1019        no register/latch found for path from %s to %s,
1605 WriteSpice.cc:241         The subkct file %s is missing definitions for %s
1606 WriteSpice.cc:270         subckt %s port %s has no corresponding liberty port, pg_port and is not power or ground.
1640 SpefReader.cc:154         illegal bus delimiters.
1641 SpefReader.cc:238         unknown units %s.
1642 SpefReader.cc:251         unknown units %s.
1643 SpefReader.cc:264         unknown units %s.
1644 SpefReader.cc:279         unknown units %s.
1645 SpefReader.cc:300         no name map entry for %d.
1646 SpefReader.cc:319         unknown port direction %s.
1647 SpefReader.cc:346         pin %s not found.
1648 SpefReader.cc:349         instance %s not found.
1650 SpefReader.cc:369         net %s not found.
1651 SpefReader.cc:483         %s not connected to net %s.
1652 SpefReader.cc:489         pin %s not found.
1653 SpefReader.cc:503         %s not connected to net %s.
1654 SpefReader.cc:509         node %s not a pin or net:number
1655 SpefReader.cc:521         %s not connected to net %s.
1656 SpefReader.cc:525         pin %s not found.
1657 SpefReader.cc:642         %s.
1658 SpefReader.cc:60          Delay calculator %s does not support reduction.
1700 CcsCeffDelayCalc.cc:102   VDD not defined in library %s
1701 CcsCeffDelayCalc.cc:273   unsupported ccs region count.
1720 PrimaDelayCalc.cc:229     VDD not defined in library %s
1751 ArcDcalcWaveforms.cc:56   VDD not defined in library %s
1752 PrimaDelayCalc.cc:765     G matrix is singular.
1903 WriteSpice.tcl:145        Cannot write $spice_dir.
1904 WriteSpice.tcl:148        No -spice_filename specified.
1905 WriteSpice.tcl:154        -lib_subckt_file $lib_subckt_file is not readable.
1906 WriteSpice.tcl:157        No -lib_subckt_file specified.
1907 WriteSpice.tcl:163        -model_file $model_file is not readable.
1908 WriteSpice.tcl:166        No -model_file specified.
1909 WriteSpice.tcl:172        No -power specified.
1910 WriteSpice.tcl:111        Unknown circuit simulator
1913 WriteSpice.tcl:244        Cannot write $plot_dir.
1914 WriteSpice.tcl:247        No -plot_basename specified.
1915 WriteSpice.tcl:178        No -ground specified.
1920 WriteSpice.tcl:36         Directory $spice_dir not found.
1921 WriteSpice.tcl:39         $spice_dir is not a directory.
1922 WriteSpice.tcl:42         Cannot write in $spice_dir.
1923 WriteSpice.tcl:45         No -spice_directory specified.
1924 WriteSpice.tcl:51         -lib_subckt_file $lib_subckt_file is not readable.
1925 WriteSpice.tcl:54         No -lib_subckt_file specified.
1926 WriteSpice.tcl:60         -model_file $model_file is not readable.
1927 WriteSpice.tcl:63         No -model_file specified.
1928 WriteSpice.tcl:69         No -power specified.
1929 WriteSpice.tcl:75         No -ground specified.
1930 WriteSpice.tcl:81         No -path_args specified.
1931 WriteSpice.tcl:86         No paths found for -path_args $path_args.
1932 WriteSpice.tcl:139        Missing -gates argument.
1933 WriteSpice.tcl:212        Missing -gates argument.
2100 ArcDelayCalc.cc:86        no timing arc for %s input/driver pins.
2101 ArcDelayCalc.cc:91        %s not a valid rise/fall.
2102 ArcDelayCalc.cc:94        Pin %s/%s not found.
2103 ArcDelayCalc.cc:97        %s not a valid rise/fall.
2104 ArcDelayCalc.cc:100       Pin %s/%s not found.
2105 ArcDelayCalc.cc:103       Instance %s not found.
2120 Network.i:252             unknown namespace
2121 Sdc.i:105                 unknown analysis type
2122 Sdc.i:232                 unknown wire load mode
2140 StaTclTypes.i:431         Delay calc arg requires 5 or 6 args.
