# See LICENSE for licensing information. # # Copyright (c) 2016-2019 Regents of the University of California and The Board # of Regents for the Oklahoma Agricultural and Mechanical College # (acting for and on behalf of Oklahoma State University) # All rights reserved. # import hierarchy_design import debug from tech import * from vector import vector class contact(hierarchy_design.hierarchy_design): """ Object for a contact shape with its conductor enclosures. Creates a contact array minimum active or poly enclosure and metal1 enclosure. This class has enclosure on two or four sides of the contact. The direction specifies whether the first and second layer have asymmetric extension in the H or V direction. The well/implant_type is an option to add a select/implant layer enclosing the contact. This is necessary to import layouts into Magic which requires the select to be in the same GDS hierarchy as the contact. """ def __init__(self, layer_stack, dimensions=(1, 1), directions=("V", "V"), implant_type=None, well_type=None, name=""): # This will ignore the name parameter since # we can guarantee a unique name here hierarchy_design.hierarchy_design.__init__(self, name) debug.info(4, "create contact object {0}".format(name)) self.add_comment("layers: {0}".format(layer_stack)) self.add_comment("dimensions: {0}".format(dimensions)) if implant_type or well_type: self.add_comment("implant type: {}\n".format(implant_type)) self.add_comment("well_type: {}\n".format(well_type)) self.layer_stack = layer_stack self.dimensions = dimensions self.directions = directions self.offset = vector(0, 0) self.implant_type = implant_type self.well_type = well_type # Module does not have pins, but has empty pin list. self.pins = [] self.create_layout() def create_layout(self): self.setup_layers() self.setup_layout_constants() self.create_contact_array() self.create_first_layer_enclosure() self.create_second_layer_enclosure() self.create_nitride_cut_enclosure() self.height = max(obj.offset.y + obj.height for obj in self.objs) self.width = max(obj.offset.x + obj.width for obj in self.objs) # Do not include the select layer in the height/width if self.implant_type and self.well_type: self.create_implant_well_enclosures() elif self.implant_type or self.well_type: debug.error(-1, "Must define both implant and well type or none at all.") def setup_layers(self): """ Locally assign the layer names. """ (first_layer, via_layer, second_layer) = self.layer_stack self.first_layer_name = first_layer self.second_layer_name = second_layer # Contacts will have unique per first layer if via_layer in layer.keys(): self.via_layer_name = via_layer elif via_layer == "contact": if first_layer in ("active", "poly"): self.via_layer_name = first_layer + "_" + via_layer elif second_layer in ("active", "poly"): self.via_layer_name = second_layer + "_" + via_layer else: debug.error("Invalid via layer {}".format(via_layer), -1) else: debug.error("Invalid via layer {}".format(via_layer), -1) def setup_layout_constants(self): """ Determine the design rules for the enclosure layers """ self.contact_width = drc("minwidth_{0}". format(self.via_layer_name)) contact_to_contact = drc("{0}_to_{0}".format(self.via_layer_name)) self.contact_pitch = self.contact_width + contact_to_contact self.contact_array_width = self.contact_width + (self.dimensions[0] - 1) * self.contact_pitch self.contact_array_height = self.contact_width + (self.dimensions[1] - 1) * self.contact_pitch # DRC rules # The extend rule applies to asymmetric enclosures in one direction. # The enclosure rule applies to symmetric enclosure component. first_layer_minwidth = drc("minwidth_{0}".format(self.first_layer_name)) first_layer_enclosure = drc("{0}_enclosure_{1}".format(self.first_layer_name, self.via_layer_name)) first_layer_extend = drc("{0}_extend_{1}".format(self.first_layer_name, self.via_layer_name)) second_layer_minwidth = drc("minwidth_{0}".format(self.second_layer_name)) second_layer_enclosure = drc("{0}_enclosure_{1}".format(self.second_layer_name, self.via_layer_name)) second_layer_extend = drc("{0}_extend_{1}".format(self.second_layer_name, self.via_layer_name)) # In some technologies, the minimum width may be larger # than the overlap requirement around the via, so # check this for each dimension. if self.directions[0] == "V": self.first_layer_horizontal_enclosure = max(first_layer_enclosure, (first_layer_minwidth - self.contact_array_width) / 2) self.first_layer_vertical_enclosure = max(first_layer_extend, (first_layer_minwidth - self.contact_array_height) / 2) elif self.directions[0] == "H": self.first_layer_horizontal_enclosure = max(first_layer_extend, (first_layer_minwidth - self.contact_array_width) / 2) self.first_layer_vertical_enclosure = max(first_layer_enclosure, (first_layer_minwidth - self.contact_array_height) / 2) else: debug.error("Invalid first layer direction.", -1) # In some technologies, the minimum width may be larger than the overlap requirement around the via, so # check this for each dimension. if self.directions[1] == "V": self.second_layer_horizontal_enclosure = max(second_layer_enclosure, (second_layer_minwidth - self.contact_array_width) / 2) self.second_layer_vertical_enclosure = max(second_layer_extend, (second_layer_minwidth - self.contact_array_height) / 2) elif self.directions[1] == "H": self.second_layer_horizontal_enclosure = max(second_layer_extend, (second_layer_minwidth - self.contact_array_height) / 2) self.second_layer_vertical_enclosure = max(second_layer_enclosure, (second_layer_minwidth - self.contact_array_width) / 2) else: debug.error("Invalid second layer direction.", -1) def create_contact_array(self): """ Create the contact array at the origin""" # offset for the via array self.via_layer_position = vector( max(self.first_layer_horizontal_enclosure, self.second_layer_horizontal_enclosure), max(self.first_layer_vertical_enclosure, self.second_layer_vertical_enclosure)) for i in range(self.dimensions[1]): offset = self.via_layer_position + vector(0, self.contact_pitch * i) for j in range(self.dimensions[0]): self.add_rect(layer=self.via_layer_name, offset=offset, width=self.contact_width, height=self.contact_width) offset = offset + vector(self.contact_pitch, 0) def create_nitride_cut_enclosure(self): """ Special layer that encloses poly contacts in some processes """ # Check if there is a special poly nitride cut layer if "npc" not in layer.keys(): return # Only add for poly layers if self.first_layer_name == "poly": self.add_rect(layer="npc", offset=self.first_layer_position, width=self.first_layer_width, height=self.first_layer_height) elif self.second_layer_name == "poly": self.add_rect(layer="npc", offset=self.second_layer_position, width=self.second_layer_width, height=self.second_layer_height) def create_first_layer_enclosure(self): # this is if the first and second layers are different self.first_layer_position = vector( max(self.second_layer_horizontal_enclosure - self.first_layer_horizontal_enclosure, 0), max(self.second_layer_vertical_enclosure - self.first_layer_vertical_enclosure, 0)) self.first_layer_width = self.contact_array_width + 2 * self.first_layer_horizontal_enclosure self.first_layer_height = self.contact_array_height + 2 * self.first_layer_vertical_enclosure self.add_rect(layer=self.first_layer_name, offset=self.first_layer_position, width=self.first_layer_width, height=self.first_layer_height) def create_second_layer_enclosure(self): # this is if the first and second layers are different self.second_layer_position = vector( max(self.first_layer_horizontal_enclosure - self.second_layer_horizontal_enclosure, 0), max(self.first_layer_vertical_enclosure - self.second_layer_vertical_enclosure, 0)) self.second_layer_width = self.contact_array_width + 2 * self.second_layer_horizontal_enclosure self.second_layer_height = self.contact_array_height + 2 * self.second_layer_vertical_enclosure self.add_rect(layer=self.second_layer_name, offset=self.second_layer_position, width=self.second_layer_width, height=self.second_layer_height) def create_implant_well_enclosures(self): implant_position = self.first_layer_position - [drc("implant_enclosure_active")] * 2 implant_width = self.first_layer_width + 2 * drc("implant_enclosure_active") implant_height = self.first_layer_height + 2 * drc("implant_enclosure_active") self.add_rect(layer="{}implant".format(self.implant_type), offset=implant_position, width=implant_width, height=implant_height) well_position = self.first_layer_position - [drc("well_enclosure_active")] * 2 well_width = self.first_layer_width + 2 * drc("well_enclosure_active") well_height = self.first_layer_height + 2 * drc("well_enclosure_active") self.add_rect(layer="{}well".format(self.well_type), offset=well_position, width=well_width, height=well_height) def analytical_power(self, corner, load): """ Get total power of a module """ return self.return_power() from sram_factory import factory # This is not instantiated and used for calculations only. # These are static 1x1 contacts to reuse in all the design modules. well = factory.create(module_type="contact", layer_stack=active_stack, directions=("H", "V")) active = factory.create(module_type="contact", layer_stack=active_stack, directions=("H", "V")) poly = factory.create(module_type="contact", layer_stack=poly_stack, directions=("V", "H")) if "li" in layer.keys(): lim1 = factory.create(module_type="contact", layer_stack=li_stack, directions=("V", "H")) else: lim1 = None m1m2 = factory.create(module_type="contact", layer_stack=m1_stack, directions=("H", "V")) m2m3 = factory.create(module_type="contact", layer_stack=m2_stack, directions=("V", "H")) if "metal4" in layer.keys(): m3m4 = factory.create(module_type="contact", layer_stack=m3_stack, directions=("H", "V")) else: m3m4 = None