import sys,re,shutil import debug import tech import math from .stimuli import * from .trim_spice import * from .charutils import * import utils from globals import OPTS class delay(): """Functions to measure the delay and power of an SRAM at a given address and data bit. In general, this will perform the following actions: 1) Trim the netlist to remove unnecessary logic. 2) Find a feasible clock period using max load/slew on the trimmed netlist. 3) Characterize all loads/slews and consider fail when delay is greater than 5% of feasible delay using trimmed netlist. 4) Measure the leakage during the last cycle of the trimmed netlist when there is no operation. 5) Measure the leakage of the whole netlist (untrimmed) in each corner. 6) Subtract the trimmed leakage and add the untrimmed leakage to the power. Netlist trimming can be removed by setting OPTS.trim_netlist to False, but this is VERY slow. """ def __init__(self, sram, spfile, corner): self.sram = sram self.name = sram.name self.word_size = self.sram.word_size self.addr_size = self.sram.addr_size self.num_cols = self.sram.num_cols self.num_rows = self.sram.num_rows self.num_banks = self.sram.num_banks self.sp_file = spfile # These are the member variables for a simulation self.period = 0 self.set_load_slew(0,0) self.set_corner(corner) def set_corner(self,corner): """ Set the corner values """ self.corner = corner (self.process, self.vdd_voltage, self.temperature) = corner def set_load_slew(self,load,slew): """ Set the load and slew """ self.load = load self.slew = slew def check_arguments(self): """Checks if arguments given for write_stimulus() meets requirements""" try: int(self.probe_address, 2) except ValueError: debug.error("Probe Address is not of binary form: {0}".format(self.probe_address),1) if len(self.probe_address) != self.addr_size: debug.error("Probe Address's number of bits does not correspond to given SRAM",1) if not isinstance(self.probe_data, int) or self.probe_data>self.word_size or self.probe_data<0: debug.error("Given probe_data is not an integer to specify a data bit",1) def write_generic_stimulus(self): """ Create the instance, supplies, loads, and access transistors. """ # add vdd/gnd statements self.sf.write("\n* Global Power Supplies\n") self.stim.write_supply() # instantiate the sram self.sf.write("\n* Instantiation of the SRAM\n") self.stim.inst_sram(abits=self.addr_size, dbits=self.word_size, sram_name=self.name) self.sf.write("\n* SRAM output loads\n") for i in range(self.word_size): self.sf.write("CD{0} d[{0}] 0 {1}f\n".format(i,self.load)) # add access transistors for data-bus self.sf.write("\n* Transmission Gates for data-bus and control signals\n") self.stim.inst_accesstx(dbits=self.word_size) def write_delay_stimulus(self): """ Creates a stimulus file for simulations to probe a bitcell at a given clock period. Address and bit were previously set with set_probe(). Input slew (in ns) and output capacitive load (in fF) are required for charaterization. """ self.check_arguments() # obtains list of time-points for each rising clk edge self.obtain_cycle_times() # creates and opens stimulus file for writing temp_stim = "{0}/stim.sp".format(OPTS.openram_temp) self.sf = open(temp_stim, "w") self.sf.write("* Delay stimulus for period of {0}n load={1}fF slew={2}ns\n\n".format(self.period, self.load, self.slew)) self.stim = stimuli(self.sf, self.corner) # include files in stimulus file self.stim.write_include(self.trim_sp_file) self.write_generic_stimulus() # generate data and addr signals self.sf.write("\n* Generation of data and address signals\n") for i in range(self.word_size): if i == self.probe_data: self.gen_data(clk_times=self.cycle_times, sig_name="data[{0}]".format(i)) else: self.stim.gen_constant(sig_name="d[{0}]".format(i), v_val=0) self.gen_addr(clk_times=self.cycle_times, addr=self.probe_address) # generate control signals self.sf.write("\n* Generation of control signals\n") self.gen_csb(self.cycle_times) self.gen_web(self.cycle_times) self.gen_oeb(self.cycle_times) self.sf.write("\n* Generation of global clock signal\n") self.stim.gen_pulse(sig_name="CLK", v1=0, v2=self.vdd_voltage, offset=self.period, period=self.period, t_rise=self.slew, t_fall=self.slew) self.write_delay_measures() # run until the end of the cycle time self.stim.write_control(self.cycle_times[-1] + self.period) self.sf.close() def write_power_stimulus(self, trim): """ Creates a stimulus file to measure leakage power only. This works on the *untrimmed netlist*. """ self.check_arguments() # obtains list of time-points for each rising clk edge self.obtain_cycle_times() # creates and opens stimulus file for writing temp_stim = "{0}/stim.sp".format(OPTS.openram_temp) self.sf = open(temp_stim, "w") self.sf.write("* Power stimulus for period of {0}n\n\n".format(self.period)) self.stim = stimuli.stimuli(self.sf, self.corner) # include UNTRIMMED files in stimulus file if trim: self.stim.write_include(self.trim_sp_file) else: self.stim.write_include(self.sim_sp_file) self.write_generic_stimulus() # generate data and addr signals self.sf.write("\n* Generation of data and address signals\n") for i in range(self.word_size): self.stim.gen_constant(sig_name="d[{0}]".format(i), v_val=0) for i in range(self.addr_size): self.stim.gen_constant(sig_name="A[{0}]".format(i), v_val=0) # generate control signals self.sf.write("\n* Generation of control signals\n") self.stim.gen_constant(sig_name="CSb", v_val=self.vdd_voltage) self.stim.gen_constant(sig_name="WEb", v_val=self.vdd_voltage) self.stim.gen_constant(sig_name="OEb", v_val=self.vdd_voltage) self.sf.write("\n* Generation of global clock signal\n") self.stim.gen_constant(sig_name="CLK", v_val=0) self.write_power_measures() # run until the end of the cycle time self.stim.write_control(2*self.period) self.sf.close() def write_delay_measures(self): """ Write the measure statements to quantify the delay and power results. """ self.sf.write("\n* Measure statements for delay and power\n") # Output some comments to aid where cycles start and # what is happening for comment in self.cycle_comments: self.sf.write("* {}\n".format(comment)) # Trigger on the clk of the appropriate cycle trig_name = "clk" targ_name = "{0}".format("d[{0}]".format(self.probe_data)) trig_val = targ_val = 0.5 * self.vdd_voltage # Delay the target to measure after the negative edge self.stim.gen_meas_delay(meas_name="DELAY_HL", trig_name=trig_name, targ_name=targ_name, trig_val=trig_val, targ_val=targ_val, trig_dir="FALL", targ_dir="FALL", trig_td=self.cycle_times[self.read0_cycle], targ_td=self.cycle_times[self.read0_cycle]+0.5*self.period) self.stim.gen_meas_delay(meas_name="DELAY_LH", trig_name=trig_name, targ_name=targ_name, trig_val=trig_val, targ_val=targ_val, trig_dir="FALL", targ_dir="RISE", trig_td=self.cycle_times[self.read1_cycle], targ_td=self.cycle_times[self.read1_cycle]+0.5*self.period) self.stim.gen_meas_delay(meas_name="SLEW_HL", trig_name=targ_name, targ_name=targ_name, trig_val=0.9*self.vdd_voltage, targ_val=0.1*self.vdd_voltage, trig_dir="FALL", targ_dir="FALL", trig_td=self.cycle_times[self.read0_cycle], targ_td=self.cycle_times[self.read0_cycle]+0.5*self.period) self.stim.gen_meas_delay(meas_name="SLEW_LH", trig_name=targ_name, targ_name=targ_name, trig_val=0.1*self.vdd_voltage, targ_val=0.9*self.vdd_voltage, trig_dir="RISE", targ_dir="RISE", trig_td=self.cycle_times[self.read1_cycle], targ_td=self.cycle_times[self.read1_cycle]+0.5*self.period) # add measure statements for power t_initial = self.cycle_times[self.write0_cycle] t_final = self.cycle_times[self.write0_cycle+1] self.stim.gen_meas_power(meas_name="WRITE0_POWER", t_initial=t_initial, t_final=t_final) t_initial = self.cycle_times[self.write1_cycle] t_final = self.cycle_times[self.write1_cycle+1] self.stim.gen_meas_power(meas_name="WRITE1_POWER", t_initial=t_initial, t_final=t_final) t_initial = self.cycle_times[self.read0_cycle] t_final = self.cycle_times[self.read0_cycle+1] self.stim.gen_meas_power(meas_name="READ0_POWER", t_initial=t_initial, t_final=t_final) t_initial = self.cycle_times[self.read1_cycle] t_final = self.cycle_times[self.read1_cycle+1] self.stim.gen_meas_power(meas_name="READ1_POWER", t_initial=t_initial, t_final=t_final) def write_power_measures(self): """ Write the measure statements to quantify the leakage power only. """ self.sf.write("\n* Measure statements for idle leakage power\n") # add measure statements for power t_initial = self.period t_final = 2*self.period self.stim.gen_meas_power(meas_name="leakage_power", t_initial=t_initial, t_final=t_final) def find_feasible_period(self): """ Uses an initial period and finds a feasible period before we run the binary search algorithm to find min period. We check if the given clock period is valid and if it's not, we continue to double the period until we find a valid period to use as a starting point. """ feasible_period = float(tech.spice["feasible_period"]) time_out = 8 while True: debug.info(1, "Trying feasible period: {0}ns".format(feasible_period)) time_out -= 1 if (time_out <= 0): debug.error("Timed out, could not find a feasible period.",2) self.period = feasible_period (success, results)=self.run_delay_simulation() if not success: feasible_period = 2 * feasible_period continue feasible_delay_lh = results["delay_lh"] feasible_slew_lh = results["slew_lh"] feasible_delay_hl = results["delay_hl"] feasible_slew_hl = results["slew_hl"] debug.info(1, "Found feasible_period: {0}ns feasible_delay {1}ns/{2}ns slew {3}ns/{4}ns".format(feasible_period, feasible_delay_lh, feasible_delay_hl, feasible_slew_lh, feasible_slew_hl)) self.period = feasible_period return (feasible_delay_lh, feasible_delay_hl) def run_delay_simulation(self): """ This tries to simulate a period and checks if the result works. If so, it returns True and the delays, slews, and powers. It works on the trimmed netlist by default, so powers do not include leakage of all cells. """ # Checking from not data_value to data_value self.write_delay_stimulus() self.stim.run_sim() delay_hl = parse_spice_list("timing", "delay_hl") delay_lh = parse_spice_list("timing", "delay_lh") slew_hl = parse_spice_list("timing", "slew_hl") slew_lh = parse_spice_list("timing", "slew_lh") delays = (delay_hl, delay_lh, slew_hl, slew_lh) read0_power=parse_spice_list("timing", "read0_power") write0_power=parse_spice_list("timing", "write0_power") read1_power=parse_spice_list("timing", "read1_power") write1_power=parse_spice_list("timing", "write1_power") if not self.check_valid_delays(delays): return (False,{}) # For debug, you sometimes want to inspect each simulation. #key=raw_input("press return to continue") # Scale results to ns and mw, respectively result = { "delay_hl" : delay_hl*1e9, "delay_lh" : delay_lh*1e9, "slew_hl" : slew_hl*1e9, "slew_lh" : slew_lh*1e9, "read0_power" : read0_power*1e3, "read1_power" : read1_power*1e3, "write0_power" : write0_power*1e3, "write1_power" : write1_power*1e3} # The delay is from the negative edge for our SRAM return (True,result) def run_power_simulation(self): """ This simulates a disabled SRAM to get the leakage power when it is off. """ self.write_power_stimulus(trim=False) self.stim.run_sim() leakage_power=parse_spice_list("timing", "leakage_power") debug.check(leakage_power!="Failed","Could not measure leakage power.") self.write_power_stimulus(trim=True) self.stim.run_sim() trim_leakage_power=parse_spice_list("timing", "leakage_power") debug.check(trim_leakage_power!="Failed","Could not measure leakage power.") # For debug, you sometimes want to inspect each simulation. #key=raw_input("press return to continue") return (leakage_power*1e3, trim_leakage_power*1e3) def check_valid_delays(self, delay_tuple): """ Check if the measurements are defined and if they are valid. """ (delay_hl, delay_lh, slew_hl, slew_lh) = delay_tuple # if it failed or the read was longer than a period if type(delay_hl)!=float or type(delay_lh)!=float or type(slew_lh)!=float or type(slew_hl)!=float: debug.info(2,"Failed simulation: period {0} load {1} slew {2}, delay_hl={3}n delay_lh={4}ns slew_hl={5}n slew_lh={6}n".format(self.period, self.load, self.slew, delay_hl, delay_lh, slew_hl, slew_lh)) return False # Scale delays to ns (they previously could have not been floats) delay_hl *= 1e9 delay_lh *= 1e9 slew_hl *= 1e9 slew_lh *= 1e9 if delay_hl>self.period or delay_lh>self.period or slew_hl>self.period or slew_lh>self.period: debug.info(2,"UNsuccessful simulation: period {0} load {1} slew {2}, delay_hl={3}n delay_lh={4}ns slew_hl={5}n slew_lh={6}n".format(self.period, self.load, self.slew, delay_hl, delay_lh, slew_hl, slew_lh)) return False else: debug.info(2,"Successful simulation: period {0} load {1} slew {2}, delay_hl={3}n delay_lh={4}ns slew_hl={5}n slew_lh={6}n".format(self.period, self.load, self.slew, delay_hl, delay_lh, slew_hl, slew_lh)) return True def find_min_period(self, feasible_delay_lh, feasible_delay_hl): """ Searches for the smallest period with output delays being within 5% of long period. """ previous_period = ub_period = self.period lb_period = 0.0 # Binary search algorithm to find the min period (max frequency) of design time_out = 25 while True: time_out -= 1 if (time_out <= 0): debug.error("Timed out, could not converge on minimum period.",2) target_period = 0.5 * (ub_period + lb_period) self.period = target_period debug.info(1, "MinPeriod Search: {0}ns (ub: {1} lb: {2})".format(target_period, ub_period, lb_period)) if self.try_period(feasible_delay_lh, feasible_delay_hl): ub_period = target_period else: lb_period = target_period if relative_compare(ub_period, lb_period, error_tolerance=0.05): # ub_period is always feasible return ub_period def try_period(self, feasible_delay_lh, feasible_delay_hl): """ This tries to simulate a period and checks if the result works. If it does and the delay is within 5% still, it returns True. """ # Checking from not data_value to data_value self.write_delay_stimulus() self.stim.run_sim() delay_hl = parse_spice_list("timing", "delay_hl") delay_lh = parse_spice_list("timing", "delay_lh") slew_hl = parse_spice_list("timing", "slew_hl") slew_lh = parse_spice_list("timing", "slew_lh") # if it failed or the read was longer than a period if type(delay_hl)!=float or type(delay_lh)!=float or type(slew_lh)!=float or type(slew_hl)!=float: debug.info(2,"Invalid measures: Period {0}, delay_hl={1}ns, delay_lh={2}ns slew_hl={3}ns slew_lh={4}ns".format(self.period, delay_hl, delay_lh, slew_hl, slew_lh)) return False delay_hl *= 1e9 delay_lh *= 1e9 slew_hl *= 1e9 slew_lh *= 1e9 if delay_hl>self.period or delay_lh>self.period or slew_hl>self.period or slew_lh>self.period: debug.info(2,"Too long delay/slew: Period {0}, delay_hl={1}ns, delay_lh={2}ns slew_hl={3}ns slew_lh={4}ns".format(self.period, delay_hl, delay_lh, slew_hl, slew_lh)) return False else: if not relative_compare(delay_lh,feasible_delay_lh,error_tolerance=0.05): debug.info(2,"Delay too big {0} vs {1}".format(delay_lh,feasible_delay_lh)) return False elif not relative_compare(delay_hl,feasible_delay_hl,error_tolerance=0.05): debug.info(2,"Delay too big {0} vs {1}".format(delay_hl,feasible_delay_hl)) return False #key=raw_input("press return to continue") debug.info(2,"Successful period {0}, delay_hl={1}ns, delay_lh={2}ns slew_hl={3}ns slew_lh={4}ns".format(self.period, delay_hl, delay_lh, slew_hl, slew_lh)) return True def set_probe(self,probe_address, probe_data): """ Probe address and data can be set separately to utilize other functions in this characterizer besides analyze.""" self.probe_address = probe_address self.probe_data = probe_data self.prepare_netlist() def prepare_netlist(self): """ Prepare a trimmed netlist and regular netlist. """ # Set up to trim the netlist here if that is enabled if OPTS.trim_netlist: self.trim_sp_file = "{}reduced.sp".format(OPTS.openram_temp) self.trimsp=trim_spice(self.sp_file, self.trim_sp_file) self.trimsp.set_configuration(self.num_banks, self.num_rows, self.num_cols, self.word_size) self.trimsp.trim(self.probe_address,self.probe_data) else: # The non-reduced netlist file when it is disabled self.trim_sp_file = "{}sram.sp".format(OPTS.openram_temp) # The non-reduced netlist file for power simulation self.sim_sp_file = "{}sram.sp".format(OPTS.openram_temp) # Make a copy in temp for debugging shutil.copy(self.sp_file, self.sim_sp_file) def analyze(self,probe_address, probe_data, slews, loads): """ Main function to characterize an SRAM for a table. Computes both delay and power characterization. """ self.set_probe(probe_address, probe_data) # This is for debugging a full simulation # debug.info(0,"Debug simulation running...") # target_period=50.0 # feasible_delay_lh=0.059083183 # feasible_delay_hl=0.17953789 # load=1.6728 # slew=0.04 # self.try_period(target_period, feasible_delay_lh, feasible_delay_hl) # sys.exit(1) # 1) Find a feasible period and it's corresponding delays using the trimmed array. self.load=max(loads) self.slew=max(slews) (feasible_delay_lh, feasible_delay_hl) = self.find_feasible_period() debug.check(feasible_delay_lh>0,"Negative delay may not be possible") debug.check(feasible_delay_hl>0,"Negative delay may not be possible") # 2) Measure the delay, slew and power for all slew/load pairs. # Make a list for each type of measurement to append results to char_data = {} for m in ["delay_lh", "delay_hl", "slew_lh", "slew_hl", "read0_power", "read1_power", "write0_power", "write1_power", "leakage_power"]: char_data[m]=[] # 2a) Find the leakage power of the trimmmed and UNtrimmed arrays. (full_array_leakage, trim_array_leakage)=self.run_power_simulation() char_data["leakage_power"]=full_array_leakage for slew in slews: for load in loads: self.set_load_slew(load,slew) # 2c) Find the delay, dynamic power, and leakage power of the trimmed array. (success, delay_results) = self.run_delay_simulation() debug.check(success,"Couldn't run a simulation. slew={0} load={1}\n".format(self.slew,self.load)) for k,v in delay_results.items(): if "power" in k: # Subtract partial array leakage and add full array leakage for the power measures char_data[k].append(v - trim_array_leakage + full_array_leakage) else: char_data[k].append(v) # 3) Finds the minimum period without degrading the delays by X% self.set_load_slew(max(loads),max(slews)) min_period = self.find_min_period(feasible_delay_lh, feasible_delay_hl) debug.check(type(min_period)==float,"Couldn't find minimum period.") debug.info(1, "Min Period: {0}n with a delay of {1} / {2}".format(min_period, feasible_delay_lh, feasible_delay_hl)) # 4) Pack up the final measurements char_data["min_period"] = round_time(min_period) return char_data def obtain_cycle_times(self): """Returns a list of key time-points [ns] of the waveform (each rising edge) of the cycles to do a timing evaluation. The last time is the end of the simulation and does not need a rising edge.""" self.cycle_comments = [] self.cycle_times = [] t_current = 0 # idle cycle, no operation msg = "Idle cycle (no clock)" self.cycle_comments.append("Cycle{0}\t{1}ns:\t{2}".format(0, t_current, msg)) self.cycle_times.append(t_current) t_current += self.period # One period msg = "W data 1 address 11..11 to initialize cell" self.cycle_times.append(t_current) self.cycle_comments.append("Cycle{0}\t{1}ns:\t{2}".format(len(self.cycle_times)-1, t_current, msg)) t_current += self.period # One period msg = "W data 0 address 11..11 (to ensure a write of value works)" self.cycle_times.append(t_current) self.write0_cycle=len(self.cycle_times)-1 self.cycle_comments.append("Cycle{0}\t{1}ns:\t{2}".format(len(self.cycle_times)-1, t_current, msg)) t_current += self.period # One period msg = "W data 1 address 00..00 (to clear bus caps)" self.cycle_times.append(t_current) self.cycle_comments.append("Cycle{0}\t{1}ns:\t{2}".format(len(self.cycle_times)-1, t_current, msg)) t_current += self.period # One period msg = "R data 0 address 11..11 to check W0 worked" self.cycle_times.append(t_current) self.read0_cycle=len(self.cycle_times)-1 self.cycle_comments.append("Cycle{0}\t{1}ns:\t{2}".format(len(self.cycle_times)-1, t_current, msg)) t_current += self.period # One period msg = "Idle cycle (Read addr 00..00)" self.cycle_comments.append("Cycle{0}\t{1}ns:\t{2}".format(len(self.cycle_times)-1, t_current, msg)) self.cycle_times.append(t_current) self.idle_cycle=len(self.cycle_times)-1 t_current += self.period # One period msg = "W data 1 address 11..11 (to ensure a write of value worked)" self.cycle_times.append(t_current) self.write1_cycle=len(self.cycle_times)-1 self.cycle_comments.append("Cycle{0}\t{1}ns:\t{2}".format(len(self.cycle_times)-1, t_current, msg)) t_current += self.period # One period msg = "W data 0 address 00..00 (to clear bus caps)" self.cycle_times.append(t_current) self.cycle_comments.append("Cycle{0}\t{1}ns:\t{2}".format(len(self.cycle_times)-1, t_current, msg)) t_current += self.period # One period msg = "R data 1 address 11..11 to check W1 worked" self.cycle_times.append(t_current) self.read1_cycle=len(self.cycle_times)-1 self.cycle_comments.append("Cycle{0}\t{1}ns:\t{2}".format(len(self.cycle_times)-1, t_current, msg)) t_current += self.period # One period msg = "Idle cycle (Read addr 11..11)" self.cycle_comments.append("Cycle{0}\t{1}ns:\t{2}".format(len(self.cycle_times)-1, t_current, msg)) self.cycle_times.append(t_current) t_current += self.period def analytical_delay(self,sram, slews, loads): """ Just return the analytical model results for the SRAM. """ delay_lh = [] delay_hl = [] slew_lh = [] slew_hl = [] for slew in slews: for load in loads: self.set_load_slew(load,slew) bank_delay = sram.analytical_delay(self.slew,self.load) # Convert from ps to ns delay_lh.append(bank_delay.delay/1e3) delay_hl.append(bank_delay.delay/1e3) slew_lh.append(bank_delay.slew/1e3) slew_hl.append(bank_delay.slew/1e3) power = sram.analytical_power(self.process, self.vdd_voltage, self.temperature, load) #convert from nW to mW power.dynamic /= 1e6 power.leakage /= 1e6 debug.info(1,"Dynamic Power: {0} mW".format(power.dynamic)) debug.info(1,"Leakage Power: {0} mW".format(power.leakage)) data = {"min_period": 0, "delay_lh": delay_lh, "delay_hl": delay_hl, "slew_lh": slew_lh, "slew_hl": slew_hl, "read0_power": power.dynamic, "read1_power": power.dynamic, "write0_power": power.dynamic, "write1_power": power.dynamic, "leakage_power": power.leakage } return data def gen_data(self, clk_times, sig_name): """ Generates the PWL data inputs for a simulation timing test. """ # values for NOP, W1, W0, W1, R0, NOP, W1, W0, R1, NOP # we are asserting the opposite value on the other side of the tx gate during # the read to be "worst case". Otherwise, it can actually assist the read. values = [0, 1, 0, 1, 1, 1, 1, 0, 0, 0 ] self.stim.gen_pwl(sig_name, clk_times, values, self.period, self.slew, 0.05) def gen_addr(self, clk_times, addr): """ Generates the address inputs for a simulation timing test. This alternates between all 1's and all 0's for the address. """ zero_values = [0, 0, 0, 1, 0, 0, 0, 1, 0, 0 ] ones_values = [1, 1, 1, 0, 1, 0, 1, 0, 1, 1 ] for i in range(len(addr)): sig_name = "A[{0}]".format(i) if addr[i]=="1": self.stim.gen_pwl(sig_name, clk_times, ones_values, self.period, self.slew, 0.05) else: self.stim.gen_pwl(sig_name, clk_times, zero_values, self.period, self.slew, 0.05) def gen_csb(self, clk_times): """ Generates the PWL CSb signal """ # values for NOP, W1, W0, W1, R0, NOP, W1, W0, R1, NOP # Keep CSb asserted in NOP for measuring >1 period values = [1, 0, 0, 0, 0, 0, 0, 0, 0, 0] self.stim.gen_pwl("csb", clk_times, values, self.period, self.slew, 0.05) def gen_web(self, clk_times): """ Generates the PWL WEb signal """ # values for NOP, W1, W0, W1, R0, NOP, W1, W0, R1, NOP # Keep WEb deasserted in NOP for measuring >1 period values = [1, 0, 0, 0, 1, 1, 0, 0, 1, 1] self.stim.gen_pwl("web", clk_times, values, self.period, self.slew, 0.05) # Keep acc_en deasserted in NOP for measuring >1 period values = [1, 0, 0, 0, 1, 1, 0, 0, 1, 1] self.stim.gen_pwl("acc_en", clk_times, values, self.period, self.slew, 0) values = [0, 1, 1, 1, 0, 0, 1, 1, 0, 0] self.stim.gen_pwl("acc_en_inv", clk_times, values, self.period, self.slew, 0) def gen_oeb(self, clk_times): """ Generates the PWL WEb signal """ # values for NOP, W1, W0, W1, R0, W1, W0, R1, NOP # Keep OEb asserted in NOP for measuring >1 period values = [1, 1, 1, 1, 0, 0, 1, 1, 0, 0] self.stim.gen_pwl("oeb", clk_times, values, self.period, self.slew, 0.05)