From aeb8b3af6278aad7605bf9e1ad41247f1c9a6aa5 Mon Sep 17 00:00:00 2001
From: PhillipRambo <93056982+PhillipRambo@users.noreply.github.com>
Date: Thu, 27 Feb 2025 13:29:38 +0100
Subject: [PATCH] Update initial_matching.md

---
 .../part_2_matching_ideal/initial_matching.md                 | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/modules/module_2_50GHz_MPA/part_2_matching_ideal/initial_matching.md b/modules/module_2_50GHz_MPA/part_2_matching_ideal/initial_matching.md
index db0d89d7..efd2c430 100644
--- a/modules/module_2_50GHz_MPA/part_2_matching_ideal/initial_matching.md
+++ b/modules/module_2_50GHz_MPA/part_2_matching_ideal/initial_matching.md
@@ -16,8 +16,8 @@ From this point, you can use a Smith chart tool of your choice to facilitate the
 #### Step 2: L-Section Matching
 
 After using the Smith chart tool, we determined that an inductor of 105 pH and a capacitor of approximately 45 fF provide a good starting point for matching the input. These values were chosen based on the Smith chart's behavior at the given frequency.
-<p align="center"> <img src="../../../media/module_2/smith_chart_software_1.png" width="800" height="500" /> </p>
-<p align="center"> <img src="../../../media/module_2/smith_chart_software_2.png" width="800" height="600" /> </p>
+<p align="center"> <img src="../../../media/module_2/smith_chart_software_1.png" width="800" height="600" /> </p>
+<p align="center"> <img src="../../../media/module_2/smith_chart_software_2.png" width="800" height="700" /> </p>
 
 With the estimated component values in hand, we return to the schematic and insert the components accordingly. This results in the updated schematic, where the inductor and capacitor are now part of the matching network.